nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Energy Efficient Machining Through Evolutionary Real-Time Optimization of Cutting Conditions on CNC-Milling Controllers

verfasst von : Nikolaos Tapoglou, Jörn Mehnen, Jevgenijs Butans

Erschienen in: Experiments and Simulations in Advanced Manufacturing

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Optimizing the use of manufacturing resources is vital for any engineering enterprise. Modern responsible industry is also taking increasingly the environmental impact into account. In milling the correct selection of cutting conditions can help minimizing the energy consumption, thus achieving a more sustainable operation. This paper presents a novel approach of applying on-line on-board multi-objective optimization techniques for adaptive improvement of CNC milling processes through IEC 61499 standardized Function Blocks running on an industrial CNC machine controller. The results show that it is possible to run even complex advanced evolutionary optimization algorithms on modern CNC machines in real-time. The case study also demonstrates that this approach can reduce up to 25% of the peak energy demand and 12% of cutting time when compared to conventional non optimized solutions.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Modeling and Experimental Work on Electrical Discharge Machining

European Environment Agency (EEA), Final energy consumption by sector and fuel (CSI 027/ENER 016) 01 Jan 2015

Sharif Ullah AMM, Fuji A, Kubo A, Tamaki J (2014) Analyzing the sustainability of bimetallic components. Int J Autom Technol 8(5):745–753CrossRef

Sharif Ullah AMM, Akamatsu T, Furuno M, Chowdhury MAK, Kubo A (2016) Strategies for developing milling tools from the viewpoint of sustainable manufacturing. Int J Autom Technol, 727–736

Altintas Y, Kersting P, Biermann D, Budak E, Denkena B, Lazoglu I (2014) Virtual process systems for part machining operations. Annals CIRP 63(2):585–605. https://doi.org/10.1016/j.cirp.2014.05.007CrossRef

Wang L, Adamson G, Holm M, Moore P (2012) A review of function blocks for process planning and control of manufacturing equipment. J Manufact Syst 31(3):269–279. https://doi.org/10.1016/j.jmsy.2012.02.004CrossRef

Li W, Mehnen J (2013) Cloud manufacturing: distributed computing technologies for global and sustainable manufacturing. Springer, UKCrossRef

Follett J (2014) Designing for emerging technologies: UX for genomics, robotics, and the internet of things. O’Reilly Media

Erkorkmaz K, Layegh S, Lazoglu I, Erdim H (2013) Feedrate optimization for freeform milling considering constraints from the feed drive system and process mechanics. Annals CIRP 62(1):395–398. https://doi.org/10.1016/j.cirp.2013.03.084CrossRef

Shamoto E, Fujimaki S, Sencer B, Suzuki N, Kato T, Hino R (2012) A novel tool path/posture optimization concept to avoid chatter vibration in machining—proposed concept and its verification in turning. Annals CIRP 61(1):331–334. https://doi.org/10.1016/j.cirp.2012.03.133CrossRef

10.

D’Addona DM, Teti R (2013) Genetic algorithm-based optimization of cutting parameters in turning processes. Procedia CIRP 7:323–328. https://doi.org/10.1016/j.procir.2013.05.055CrossRef

11.

Guo Y, Loenders J, Duflou J, Lauwers B (2012) Optimization of energy consumption and surface quality in finish turning. Procedia CIRP 1:512–517. https://doi.org/10.1016/j.procir.2012.04.091CrossRef

12.

Zain AM, Haron H, Sharif S (2010) Application of GA to optimize cutting conditions for minimizing surface roughness in end milling machining process. Expert Syst Appl 37(6):4650–4659. https://doi.org/10.1016/j.eswa.2009.12.043CrossRef

13.

Hanafi I, Khamlichi A, Cabrera FM, Almansa E, Jabbouri A (2012) Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools. J Clean Prod 33:1–9. https://doi.org/10.1016/j.jclepro.2012.05.005CrossRef

14.

Sivasakthivel PS, Sudhakaran R, Rajeswari S (2013) Optimization of machining parameters to minimize vibration amplitude while machining Al 6063 using gray-based Taguchi method. Proc IMechE Part B: J Eng Manufact 227(12):1788–1799. https://doi.org/10.1177/0954405413494921CrossRef

15.

Campatelli G, Lorenzini L, Scippa A (2014) Optimization of process parameters using a Response Surface Method for minimizing power consumption in the milling of carbon steel. J Clean Prod 66:309–316. https://doi.org/10.1016/j.jclepro.2013.10.025CrossRef

16.

Rajemi MF, Mativenga PT, Aramcharoen A (2010) Sustainable machining: selection of optimum turning conditions based on minimum energy considerations. J Clean Prod 18:1059–1065. https://doi.org/10.1016/j.jclepro.2010.01.025CrossRef

17.

Mativenga PT, Rajemi MF (2011) Calculation of optimum cutting parameters based on minimum energy footprint. Annals CIRP 60(1):149–152. https://doi.org/10.1016/j.cirp.2011.03.088CrossRef

18.

Kuram E, Ozcelik B, Bayramoglu M, Demirbas E, Simsek BT (2013) Optimization of cutting fluids and cutting parameters during end milling by using D-optimal design of experiments. J Clean Prod 42:159–166. https://doi.org/10.1016/j.jclepro.2012.11.003CrossRef

19.

Lee CH, Yang MY, Oh CW, Gim TW, Ha JY (2015) An integrated prediction model including the cutting process for virtual product development of machine tools. Int J Mach Tools Manuf 90:29–43. https://doi.org/10.1016/j.ijmachtools.2014.12.003CrossRef

20.

Mori M, Fujishima M, Inamasu Y, Oda Y (2011) A study on energy efficiency improvement for machine tools. Annals of the CIRP 60(1):145–148. https://doi.org/10.1016/j.cirp.2011.03.099CrossRef

21.

Balogun VA, Mativenga PT (2013) Modelling of direct energy requirements in mechanical machining processes. J Clean Prod 41:179–186. https://doi.org/10.1016/j.jclepro.2012.10.015CrossRef

22.

Balogun VA, Mativenga PT (2014) Impact of un-deformed chip thickness on specific energy in mechanical machining processes. J Clean Prod 69:260–268. https://doi.org/10.1016/j.jclepro.2014.01.036CrossRef

23.

Aramcharoen A, Mativenga PT (2014) Critical factors in energy demand modelling for CNC milling and impact of toolpath strategy. J Clean Prod 78:63–74. https://doi.org/10.1016/j.jclepro.2014.04.065CrossRef

24.

Altintas Y (1994) Direct adaptive control of end milling process. Int J Mach Tools Manuf 33(4):461–472. https://doi.org/10.1016/0890-6955(94)90078-7CrossRef

25.

Denkena B, Flöter F (2012) Adaptive cutting force control on a milling machine with hybrid axis configuration. Procedia CIRP 4:109–114. https://doi.org/10.1016/j.procir.2012.10.020CrossRef

26.

Kakinuma Y, Enomoto K, Hirano T, Ohnishi K (2014) Active chatter suppression in turning by band-limited force control. Annals CIRP 63(1):365–368. https://doi.org/10.1016/j.cirp.2014.03.136CrossRef

27.

Zuperl U, Cus F, Reibenschuh M (2011) Neural control strategy of constant cutting force system in end milling. Robotics Comput-Integrated Manuf 27(3):485–493. https://doi.org/10.1016/j.rcim.2010.10.001CrossRef

28.

Yang DL, Chen JC, Chow HM, Lin CT (2006) Fuzzy-nets-based in-process surface roughness adaptive control system in end-milling operations. Int J Adv Manuf Technol 28:236–248. https://doi.org/10.1007/s00170-004-2361-7CrossRef

29.

Kim D, Jeon D (2011) Fuzzy-logic control of cutting forces in CNC milling processes using motor currents as indirect force sensors. Precision Eng 35(1):143–152. https://doi.org/10.1016/j.precisioneng.2010.09.001CrossRef

30.

Zuperl U, Kiker E, Jezernik K (2006) Adaptive force control in high-speed machining by using a system of neural networks. IEEE Int Symp Ind Electron 1:148–153. https://doi.org/10.1109/ISIE.2006.295583CrossRef

31.

Ko TJ, Kim HS (1998) Autonomous cutting parameter regulation using adaptive modeling and genetic algorithms. Precis Eng 22(4):243–251. https://doi.org/10.1016/S0141-6359(98)00019-1CrossRef

32.

Ghosh, AK, Sharif Ullah, AMM, Kubo, A, Akamatsu, T, D’Addona, DM (2020) Machining phenomenon twin construction for industry 4.0: A case of surface roughness. J Manuf Mater Process 4(1), 4010011

33.

Sharif Ullah AMM (2019) Modeling and simulation of complex manufacturing phenomena using sensor signals from the perspective of Industry 4.0. Adv Eng Inform 39:1–13CrossRef

34.

Darwin CR (1872) The origin of species by means of natural selection, or the preservation of favoured races in the struggle for life. London: John Murray. 6th edition; with additions and corrections

35.

Coello CAC, Lamont GB, Veldhuizen DAV (2007) Evolutionary algorithms for solving multi-objective problems. Springer

36.

Camara M, Ortega J, Toro F J (2007) Parallel processing for multi-objective optimization in dynamic environments. IEEE International Parallel and Distributed Processing Symposium 243, 26–30 March 2007, Long Beach, CA, 1–8. https://doi.org/10.1109/ipdps.2007.370433

37.

Konak A, Coit DW, Smith AE (2006) Multi-objective optimization using genetic algorithms: a tutorial. Reliab Eng Syst Safety 91(9):992–1007. https://doi.org/10.1016/j.ress.2005.11.018CrossRef

38.

Deb K, Udaya Bhaskara Rao N, Karthik S (2006) Dynamic multi-objective optimization and decision-making using modified NSGA-II: a case study on hydro-thermal power scheduling. EMO, 803–817

39.

Jin Y, Branke J (2005) Evolutionary optimization in uncertain environments—a survey. Evolut Comput IEEE Trans 9(3):303–317. https://doi.org/10.1109/TEVC.2005.846356CrossRef

40.

Jin Y, Sendhoff B (2004) Constructing dynamic test problems using the multiobjective optimization concept. Applications of evolutionary computing, Vol. 3005 of Lecture Notes in Computer Science, Coimbra, Portugal, April 2004, 525–536

41.

Hughes EJ (2004) Swarm guidance using a multi-objective co-evolutionary on-line evolutionary algorithm. Congress on Evolutionary computation 2004, cec2004, 2:2357–2363

42.

Farina M, Deb K, Amato P (2004) Dynamic multiobjective optimization problems: test cases, approximations, and applications. IEEE Trans Evol Comput 8(5):425–442. https://doi.org/10.1109/TEVC.2004.831456CrossRefMATH

43.

Hatzakis I, Wallace D (2006) Dynamic multi-objective optimization with evolutionary algorithms: a forward-looking approach. Proc of genetic and evolutionary computation conference (GECCO 2006), 12011208

44.

Zhang Z, Qian S, Tu X (2010) Dynamic clonal selection algorithm solving constrained multi-objective problems in dynamic environments. Inst Syst Sci Inf Technol Guizhou Univ 6:2861–2865

45.

Liu M, Zeng W, Zhao J (2011) An overview of dynamic evolutionary multi-objective optimization. Int Rev Comput Software 6(5):692–699

46.

Liu M, Zheng J, Wang J, Liu Y, Jiang L (2014) An adaptive diversity introduction method for dynamic evolutionary multiobjective optimization, 3160–3167

47.

Liu M, Zeng W (2013) Memory enhanced dynamic multi-objective evolutionary algorithm based on decomposition. Ruan Jian Xue Bao/J Software 24(7):1571–1588MATH

48.

Zhang S, Li Z, Chen S, Li R (2014) Dynamic multi-objective optimization algorithm based on ecological strategy. Jisuanji Yanjiu yu Fazhan/Comput Res Develop 51(6):1313–1330

49.

Biswas S, Das S, Suganthan PN, Coello CAC (2014) Evolutionary multiobjective optimization in dynamic environments: a set of novel benchmark functions. Proceedings of the 2014 IEEE congress on evolutionary computation, CEC 2014:3192–3199

50.

Coello CAC, EMOO repository, http://neo.lcc.uma.es/emoo/. Accessed 03/03/2017

51.

Deb K, Pratap A, Agarwal S, Meyarivan T (2002) A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans Evol Comput 6(2):182–197. https://doi.org/10.1109/4235.996017CrossRef

52.

Hughes EJ, Zbikowski R, Tsourdos A, White BA (2005) On-line evolutionary algorithm swarm trajectory optimisation. Technical report DAPS/EJH/114/2005, Cranfield University

53.

Peng X, Xu D, Zhang F (2011) UAV online path planning based on dynamic multiobjective evolutionary algorithm. 30th Chinese Control Conference (CCC). 22–24 July 2011, Yantai, IEEE, 5424–5429

54.

Wang L, Ng AHC, Deb K (2011) Multi-objective evolutionary optimisation for product design and manufacturing. Springer Publishing Company, IncorporatedCrossRef

55.

Yusup N, Zain AM, Hashim SZM (2012) Evolutionary techniques in optimizing machining parameters: review and recent applications (2007–2011). Expert Syst Appl 39(10):9909–9927. https://doi.org/10.1016/j.eswa.2012.02.109CrossRef

56.

Davim JP, Davim JP (2012) Computational methods for optimizing manufacturing technology: models and techniques. IGI Global, Hershey, PA, USA, 1St edition

57.

Roy R, Mehnen J (2008) Dynamic multi-objective optimisation for machining gradient materials. CIRP Ann Manuf Technol 57:429–432. https://doi.org/10.1016/j.cirp.2008.03.020CrossRef

58.

Wang L (2013) Machine availability monitoring and machining process planning towards cloud manufacturing. CIRP J Manufact Sci Technol 6(4):263–273. https://doi.org/10.1016/j.cirpj.2013.07.001CrossRef

59.

Zoitl A (2009) Real-time execution for IEC 61499. ISA, USA

60.

Findeisen R (2005) Nonlinear model predictive control: a sampled data feed- back perspective. PhD Thesis, Universität Stuttgart, Holzgartenstr. 16, 70174 Stuttgart

61.

Mills A, Wills A, Ninness B (2009) Nonlinear model predictive control of an inverted pendulum. Proceedings of the 2009 conference on American Control Conference, ACC’09, IEEE Press, Piscataway, NJ, USA, 2335–2340

62.

TwinCAT V3.1, Beckhoff Automation GmbH, http://www.beckhoff.com, Accessed 19 Jan 20

63.

Butans J (2011) Addressing real-time control problems in complex environments using dynamic multi-objective evolutionary approaches, PhD Thesis, Cranfield University, UK

64.

Kienzle O, Victor H (1957) Spezifische Schnittkraefte bei der Metallbearbeitung, Werkstattstechnik und Maschinenbau Bd. 47, H.5

65.

Tapoglou N, Antoniadis A (2012) 3-Dimensional kinematics simulation of face milling. Measurement 45(6):1396–1405. https://doi.org/10.1016/j.measurement.2012.03.026CrossRef

66.

Mori Seiki Co. http://en.dmgmori.com, Accessed 19/01/20

67.

Durillo JJ, Nebro AJ, Luna F, Dorronsoro B, Alba E (2006) jMetal: A java framework for developing multi-objective optimization metaheuristics. Technical Report ITI-2006–10, Departamento de Lenguajes y Ciencias de la Computación, University of Málaga, E.T.S.I. Informática, Campus de Teatinos

Titel: Energy Efficient Machining Through Evolutionary Real-Time Optimization of Cutting Conditions on CNC-Milling Controllers
verfasst von: Nikolaos Tapoglou
Jörn Mehnen
Jevgenijs Butans
Verlag: Springer International Publishing
Buch: Experiments and Simulations in Advanced Manufacturing
Print ISBN: 978-3-030-69471-5

Electronic ISBN: 978-3-030-69472-2

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-69472-2_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht