Skip to main content


Engineering with Computers

Engineering with Computers 2/2019

Ausgabe 2/2019

Inhaltsverzeichnis ( 25 Artikel )

21.03.2018 | Original Article | Ausgabe 2/2019

NURBS-augmented finite element method for stability analysis of arbitrary thin plates

Biraja Prasad Mishra, Manoranjan Barik

30.03.2018 | Original Article | Ausgabe 2/2019

Meta-heuristic multidisciplinary design optimization of wind turbine blades obtained from circular pipes

Alessandro Ceruti

26.03.2018 | Original Article | Ausgabe 2/2019 Open Access

Tolerance-based Pareto optimality for structural identification accounting for uncertainty

Corrado Chisari

18.04.2018 | Original Article | Ausgabe 2/2019 Open Access

Three-dimensional CFD simulations with large displacement of the geometries using a connectivity-change moving mesh approach

Nicolas Barral, Frédéric Alauzet

16.04.2018 | Original Article | Ausgabe 2/2019

A framework of shape optimisation based on the isogeometric boundary element method toward designing thin-silicon photovoltaic devices

Toru Takahashi, Tatsuro Yamamoto, Yuta Shimba, Hiroshi Isakari, Toshiro Matsumoto

16.04.2018 | Original Article | Ausgabe 2/2019

Forecasting the stress concentration coefficient around the mined panel using soft computing methodology

Mohammad Rezaei

19.04.2018 | Original Article | Ausgabe 2/2019

Geometrically nonlinear deflection and stress analysis of skew sandwich shell panel using higher-order theory

Pankaj V. Katariya, Chetan K. Hirwani, Subrata K. Panda

18.04.2018 | Original Article | Ausgabe 2/2019

A novel method for asphalt pavement crack classification based on image processing and machine learning

Nhat-Duc Hoang, Quoc-Lam Nguyen

08.05.2018 | Original Article | Ausgabe 2/2019

Topology optimization of truss subjected to static and dynamic constraints by integrating simulated annealing into passing vehicle search algorithms

Ghanshyam G. Tejani, Vimal J. Savsani, Sujin Bureerat, Vivek K. Patel, Poonam Savsani

28.05.2018 | Original Article | Ausgabe 2/2019

A multiobjective sensor placement optimization for SHM systems considering Fisher information matrix and mode shape interpolation

Guilherme Ferreira Gomes, Fabricio Alves de Almeida, Patricia da Silva Lopes Alexandrino, Sebastiao Simões da Cunha Jr., Bruno Silva de Sousa, Antonio Carlos Ancelotti Jr.

16.05.2018 | Original Article | Ausgabe 2/2019

ALBATROS: adaptive line-based sampling trajectories for sequential measurements

Tom Van Steenkiste, Joachim van der Herten, Dirk Deschrijver, Tom Dhaene

16.05.2018 | Original Article | Ausgabe 2/2019

An application-independent continuum mechanics interface for virtual engineering

Samuel Vogel

21.05.2018 | Original Article | Ausgabe 2/2019 Open Access

Development of an ABAQUS plugin tool for periodic RVE homogenisation

Sadik L. Omairey, Peter D. Dunning, Srinivas Sriramula

18.05.2018 | Original Article | Ausgabe 2/2019

Prediction of building damage induced by tunnelling through an optimized artificial neural network

S. Moosazadeh, E. Namazi, H. Aghababaei, A. Marto, H. Mohamad, M. Hajihassani

22.05.2018 | Original Article | Ausgabe 2/2019

Analysis and optimal design of scissor-link foldable structures

A. Kaveh, M. Abedi

24.05.2018 | Original Article | Ausgabe 2/2019

Two-step deferred correction algorithm for the problem of fluid film squeezed between rotating disks

M. Ghasemi

26.05.2018 | Original Article | Ausgabe 2/2019

A sunflower optimization (SFO) algorithm applied to damage identification on laminated composite plates

Guilherme Ferreira Gomes, Sebastiao Simões da Cunha Jr., Antonio Carlos Ancelotti Jr.

25.05.2018 | Original Article | Ausgabe 2/2019

Assessing the suitability of imperialist competitive algorithm for the predicting aims: an engineering case

Mao Wu, Qingxiang Cai, Tao Shang

01.06.2018 | Original Article | Ausgabe 2/2019

A novel probabilistic simulation approach for forecasting the safety factor of slopes: a case study

S. Farid F. Mojtahedi, Sanaz Tabatabaee, Mahyar Ghoroqi, Mehran Soltani Tehrani, Behrouz Gordan, Milad Ghoroqi

22.06.2018 | Original Article | Ausgabe 2/2019

A combination of artificial bee colony and neural network for approximating the safety factor of retaining walls

Ebrahim Noroozi Ghaleini, Mohammadreza Koopialipoor, Mohammadreza Momenzadeh, Mehdi Esfandi Sarafraz, Edy Tonnizam Mohamad, Behrouz Gordan

16.06.2018 | Original Article | Ausgabe 2/2019

Long-term prediction of rockburst hazard in deep underground openings using three robust data mining techniques

Roohollah Shirani Faradonbeh, Abbas Taheri

15.06.2018 | Original Article | Ausgabe 2/2019

Mixed mode embedded circular delamination propagation in spar wingskin joint made with curved FRP composite laminates

P. K. Mishra, A. K. Pradhan, M. K. Pandit

29.06.2018 | Original Article | Ausgabe 2/2019

Cuckoo search algorithm with memory and the vibrant fault diagnosis for hydroelectric generating unit

Jiatang Cheng, Lei Wang, Yan Xiong

09.07.2018 | Original Article | Ausgabe 2/2019

Dynamic construction material layout planning optimization model by integrating 4D BIM

Min-Yuan Cheng, Nai-Wen Chang

13.07.2018 | Original Article | Ausgabe 2/2019

Simultaneous topology, shape, and size optimization of trusses, taking account of uncertainties using multi-objective evolutionary algorithms

Teerapol Techasen, Kittinan Wansasueb, Natee Panagant, Nantiwat Pholdee, Sujin Bureerat

Aktuelle Ausgaben