nach oben

Cellulose

Erschienen in:

05.12.2018 | Original Research

Enhanced mechanical and dielectric properties of Aramid fiber/Mica-nanofibrillated cellulose composite paper with biomimetic multilayered structure

verfasst von: Yongsheng Zhao, Wanbin Dang, Lianmeng Si, Zhaoqing Lu

Erschienen in: Cellulose | Ausgabe 3/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The application of Aramid/mica composite paper in high-voltage electric insulation is hampered by its limited breakdown strength and mechanical robustness. In this work, Aramid fiber/Mica-NFC composite papers with varied amount of nanofibrillated cellulose (NFC) were fabricated by vacuum-assisted self-assembly process, wherein NFC was used as carrier/adhesion polymer. The Aramid fiber/Mica-NFC composite papers exhibited high mechanical strength (~ 29.04 MPa), superior dielectric properties (~ 14.87 kV/mm) and good thermal stability (~ 300 °C). Importantly, NFC acts as interfacial layer since the physical properties of NaOH-Urea treated Aramid/Mica-NFC composite significantly decreased. Based on visualization of NFC by fluorescence tracking, the addition of NFC favors the formation of biomimetic multilayer structure. Furthermore, the co-continuous double-network-like multilayer structured composite achieved an integrated strong and tough character. Therefore, our work shed light on the importance of constructing rational-designed microstructures for the preparation of high-performance composite papers.

Graphical abstract

Vorheriger Artikel Modelling considerations for the degradation of cellulosic paper

Nächster Artikel Chemical characteristics and stability of eucalyptus kraft pulps bleached with tertiary amine catalyzed hypochlorous acid

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Andres WH (2016) Mica paper insulations for conductors and cables. In: Electrical/electronics insulation conference(Eic), pp 225–230

Bailey SW (1984) Classification and structures of the micas. Rev Miner Geochem 13(1):1–12

Billings MJ, Warren L, Wilkings R (1971) Thermal erosion of electrical insulating materials. IEEE Trans Electr Ins 6(2):82–90CrossRef

Cai J, Zhang L, Liu S, Liu Y, Xu X, Chen X, Chu B, Guo X, Xu J, Cheng H (2008) Dynamic self-assembly induced rapid dissolution of cellulose at low temperatures. Macromolecules 41:9345–9351CrossRef

Chen CT, Martinmartinez FJ, Ling S, Qin Z, Buehler MJ (2017) Nacre-inspired design of graphene oxide-polydopamine nanocomposites for enhanced mechanical properties and multi-functionalities. Nano Futures 1:011003CrossRef

Cheng Q, Huang C, Tomsia AP (2017) Freeze casting for assembling bioinspired structural materials. Adv Mater 29:1703155–1703165CrossRef

Cheng Q, Wu M, Li M, Jiang L, Tang Z (2013) Ultratough artificial nacre based on conjugated cross-linked graphene oxide. Angew Chem 52:3750–3755CrossRef

Cui W, Li M, Liu J, Wang B, Zhang C, Jiang L, Cheng Q (2014) A strong integrated strength and toughness artificial nacre based on dopamine cross-linked graphene oxide. ACS Nano 8:9511–9517CrossRef

Ding Q, Zeng J, Wang B, Gao W, Chen K, Yuan Z, Xu J (2017) Influence of binding mechanism on labeling efficiency and luminous properties of fluorescent cellulose nanocrystals. Carbohydr Polym 175:105CrossRef

Ding Q, Zeng J, Wang B, Gao W, Chen K, Yuan Z, Xu J, Tang D (2018) Effect of retention rate of fluorescent cellulose nanofibrils on paper properties and structure. Carbohydr Polym 186:73–81CrossRef

Doblhofer E, Schmid J, Riess M, Daab M, Suntinger M, Habel C, Bargel H, Hugenschmidt C, Rosenfeldt S, Breu J, Scheibel T (2016) Structural insights into water-based spider silk protein-nanoclay composites with excellent gas and water vapor barrier properties. ACS Appl Mater Interfaces 8:25535–25543CrossRef

Haktshorn L (1953) Electrical insulating materials. Nature 172:8–11CrossRef

Ho TTT, Zimmermann T, Ohr S, Caseri WR (2012) Composites of cationic nanofibrillated cellulose and layered silicates: water vapor barrier and mechanical properties. ACS Appl Mater Interfaces 4:4832–4840CrossRef

Huang J, Zhou Y, Dong L, Zhou Z, Liu R (2017) Enhancement of mechanical and electrical performances of insulating presspaper by introduction of nanocellulose. Compos Sci Technol 13:40–48CrossRef

Imai T, Sawa F, Nakano T, Ozaki T (2006) Effects of nano- and micro-filler mixture on electrical insulation properties of epoxy based composites. IEEE Trans Dielectr Electr Ins 13:319–326CrossRef

Iwamoto S, Nakagaito AN, Yano H (2007) Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites. Appl Phys A-Mater 89:461–466CrossRef

Jia F, Yang L, Wang Q, Song S (2017) Correlation of natural muscovite exfoliation with interlayer and solvation forces. RSC Adv 7:1082–1088CrossRef

Khalil HPSA, Davoudpour Y, Islam MN, Mustapha A, Sudesh K, Dungani R, Jawaid M (2014) Production and modification of nanofibrillated cellulose using various mechanical processes: a review. Carbohydr Polym 99:649–665CrossRef

Koreeda T, Matos J (2011) Thermal characterization of mica–epoxy composite used as insulation material for high voltage machines. J Therm Anal Calorim 106(2):619–623CrossRef

Li S, Yu S, Feng Y (2016) Progress in and prospects for electrical insulating materials. High Volt 1:122–129CrossRef

Li Y, Zhu H, Shen F, Wan J, Lacey S, Fang Z, Dai H, Hu L (2015) Nanocellulose as green dispersant for two-dimensional energy materials. Nano Energy 13:346–354CrossRef

Liu Y, Sasamoto R, Matsumoto T, Izawa Y, Nishijima K (2016) Influence of barrier thickness on discharge behavior in air gap with GFRP insulator under impulse voltage stress. In: Electrical Insulation and Dielectric Phenomena, pp 971–974

Lu Z, Hu W, Xie F, Hao Y (2017a) Highly improved mechanical strength of aramid paper composite via a bridge of cellulose nanofiber. Cellulose 24:2827–2835CrossRef

Lu Z, Si L, Dang W, Zhao Y (2018) Transparent and mechanically robust poly (paraphenyleneterephthamide) PPTA nanopaper toward electrical insulation based on nanoscale fibrillated aramid-fibers. Compos Part A Appl Sci Manuf 115:321–330CrossRef

Lu Z, Su Z, Song S, Zhao Y, Ma S, Zhang M (2017b) Toward high-performance fibrillated cellulose-based air filter via constructing spider-web-like structure with the aid of TBA during freeze-drying process. Cellulose 25:619–629CrossRef

Maciej O, John O, Stefan J, Helmut M, Nicholas K, Krzysztof KA, Giersig M (2004) Layer-by-layer assembled composites from multiwall carbon nanotubes with different morphologies. Nano Lett 4:1889–1895CrossRef

Ming S, Gang C, Wu Z, Su L, He J, Kuang Y, Fang Z (2016) Effective dispersion of aqueous clay suspension using carboxylated nanofibrillated cellulose as dispersant. RSC Adv 6:37330–37336CrossRef

Nascimento ED, Ramos A, Windmoller D, Rodrigo PR, Juanes RT, Greus AR, Borrás VA, Coelho LAF (2016) Breakdown, free-volume and dielectric behavior of the nanodielectric coatings based on epoxy/metal oxides. J Mater Sci Mater Electron 27:1–15CrossRef

Pak VM, Safonov GP, Papkov AV, Vorobyov PV (2011) Prospective electric insulation materials for insulation systems of electric machines. Russ Electr Eng 82:194–196CrossRef

Rotter HW, Weber HN (2016) Single conductor insulation of high voltage machines using mica tapes. In: Electrical/electronics insulation conference(Eic), pp 76–80

Shahrokhi M, Mortazavi B, Berdiyorov GR (2017) New two-dimensional boron nitride allotropes with attractive electronic and optical properties. Solid State Commun 253:51–56CrossRef

Shao W, He J, Han Q, Feng S, Wang Q, Li C, Cui S, Ding B (2016) A biomimetic multilayer nanofiber fabric fabricated by electrospinning and textile technology from polylactic acid and Tussah silk fibroin as a scaffold for bone tissue engineering. Mater Sci Eng C Mater 67:599–610CrossRef

Song N, Jiao D, Cui S, Hou X, Ding P, Shi L (2017) Highly anisotropic thermal conductivity of layer-by-layer assembled nanofibrillated cellulose/graphene nanosheets hybrid films for thermal management. ACS Appl Mater Interfaces 9:2924–2932CrossRef

Tang Z, Kotov NA, Magonov S et al (2003) Nanostructured artificial nacre. Nat Mater 2(6):413–418CrossRef

Vouyovitch L, Alberola ND, Flandin L, Beroual A (2006) Dielectric breakdown of epoxy-based composites: relative influence of physical and chemical aging. IEEE Trans Dielect Electr Ins 13:282–292CrossRef

Wang J, Cheng Q, Lin L, Jiang L (2014) Synergistic toughening of bioinspired poly(vinyl alcohol)–clay–nanofibrillar cellulose artificial nacre. ACS Nano 8:2739–2745CrossRef

Wang J, Cheng Q, Tang Z (2012) ChemInform abstract: layered nanocomposites inspired by the structure and mechanical properties of nacre. Chem Soc Rev 41:1111–1129CrossRef

Wu W, Song R, Xu Z, Jing Y, Dai H, Fang G (2018) Fluorescent cellulose nanocrystals with responsiveness to solvent polarity and ionic strength. Sens Actuators B Chem 275:490–498CrossRef

Yang B, Zhang M, Lu Z (2015) Effects of potassium titanate whiskers on the mechanical and thermal properties of poly (para-phenylene terephthalamide) paper sheet. Polym Compos 38:1390–1395CrossRef

Yin F, Tang C, Li X, Wang X (2017) Effect of moisture on mechanical properties and thermal stability of meta-aramid fiber used in insulating paper. Polymers 9:537–550CrossRef

Zammarano M, Maupin P, Sung L, Gilman J, McCarthy E, Kim Y, Fox D (2011) Revealing the interface in polymer nanocomposites. ACS Nano 5(4):3391–3399CrossRef

Zhang Z, Chang H, Xue B, Zhang S, Li X, Wong W, Li K, Zhu X (2017) Near-infrared and visible dual emissive transparent nanopaper based on Yb(III)-carbon quantum dots grafted oxidized nanofibrillated cellulose for anti-counterfeiting applications. Cellulose 25(1):377–389CrossRef

Zhang M, Huang L, Chen J, Li C, Shi G (2014) Ultratough, ultrastrong, and highly conductive graphene films with arbitrary sizes. Adv Mater 26:7588–7592CrossRef

Zhang Y, Ma X, Gan L, Xia T, Shen J, Huang J (2018) Fabrication of fluorescent cellulose nanocrystal via controllable chemical modification towards selective and quantitative detection of Cu(II) ion. Cellulose 25:5831–5842CrossRef

Zhao Y, Dang W, Lu Z, Wang L, Si L, Zhang M (2018) A novel mica-based composite via adding hybrid aramid fibers for electrical insulating application: largely improved mechanical properties and moisture-resistance. Polym Int 67:204–211CrossRef

Zimmermann T, Bordeanu N, Strub E (2010) Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential. Carbohydr Polym 79:1086–1093CrossRef

Titel: Enhanced mechanical and dielectric properties of Aramid fiber/Mica-nanofibrillated cellulose composite paper with biomimetic multilayered structure
verfasst von: Yongsheng Zhao
Wanbin Dang
Lianmeng Si
Zhaoqing Lu
Publikationsdatum: 05.12.2018
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 3/2019
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-018-2170-z

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 3/2019

In situ polymerization approach to cellulose–polyacrylamide interpenetrating network hydrogel with high strength and pH-responsive properties

Influence of cellulose chemical pretreatment on energy consumption and viscosity of produced cellulose nanofibers (CNF) and mechanical properties of nanopaper

Modifications of Alfa fibers by alkali and hydrothermal treatment

Generic strategies for functionalization of cellulosic textiles with metal salts

Production of dissolving pulp from Eulaliopsis binata with the concept of integrated biorefinery

A novel deep eutectic solvent from lignin-derived acids for improving the enzymatic digestibility of herbal residues from cellulose