nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

4. Enhanced Plate Fin Geometries with Round Tubes and Enhanced Circular Fin Geometries

verfasst von : Sujoy Kumar Saha, Hrishiraj Ranjan, Madhu Sruthi Emani, Anand Kumar Bharti

Erschienen in: Heat Transfer Enhancement in Externally Finned Tubes and Internally Finned Tubes and Annuli

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The performance of different enhanced plate fin and circular fin geometries is discussed in detail. The study on enhanced surfaces like herringbone fin, perforated fin, segmented or spine fin and vortex generators for heat transfer enhancement in round tubes is presented. Also, the effect of fin pitch and rows on heat transfer characteristics in tube bundles is reported.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Circular Fins with Staggered Tubes, Low Integral Fin Tubes

Nächstes Kapitel Oval and Flat Tube Geometries, Row Effects in Tube Banks, Local Heat Transfer Coefficient on Plain Fins, Performance Comparison, Numerical Simulation and Patents, Coatings

Abbott RW, Norris RH, Spofford WA (1980) Compact heat exchangers in general electric products—sixty years of advances in design and in manufacturing technologies. In: Shah RK, McDonald CF, Howard CP (eds) Compact heat exchangers—history, technology, manufacturing technologies. ASME Symp. HTD, vol 10, pp 37–56

Abu Madi M, Johns RA, Heikal MR (1998) Performance characteristics correlation for round tube and plate finned heat exchangers. Int J Refrig 21(7):507–517CrossRef

Amon CH, Majumdar D, Herman CV, Mayinger F, Mikic BB, Sekulic DP (1992) Numerical and experimental studies of self-sustained oscillatory flows in communicating channels. Int J Heat Mass Transf 35(11):3115–3129CrossRef

Anand NK, Kim SH, Fletcher LS (1992) The effect of plate spacing on free convection between parallel plates. J Heat Transf 114:515–527CrossRef

Anoop B, Balaji C, Velusarny K (2015) A characteristic correlation for heat transfer over serrated finned tubes. Ann Nucl Energy 85(8):1052–1065CrossRef

Ay H, Jang JY, Yeh JN (2002) Local heat transfer measurements of plate finned-tube heat exchangers by infrared thermography. Int J Heat Mass Transf 45:4069–4087CrossRef

Beecher DT, Fagan TJ (1987) Effects of fin pattern on the air side heat transfer coefficient in plate finned-tube heat exchangers. ASHRAE Trans 93(2):1961–1984

Benforado DM, Palmer J (1964) Wire loop finned surface—a new application (heat sink for silicon rectifiers). Chem Eng Prog Symp Ser 61(57):315–321

Benmachiche AH, Tahrour F, Aissaoui F, Aksas M, Bougriou C (2017) Comparison of thermal and hydraulic performances of eccentric and concentric annular-fins of heat exchanger tubes. Heat Mass Transf 53(8):2461–2471CrossRef

Biber CR (1996) Applying computational fluid dynamics to heat sink design and selection. J Electron Cooling 2:22–25

Bilir L, Ozerdem B, Erek A, İlken Z (2010) Heat transfer and pressure drop characteristics of fin-tube heat exchangers with different types of vortex generator configurations. J Enhanc Heat Transf 17(3):243–256CrossRef

Bouzari S, Ghazanfarian J (2016) Unsteady forced convection over cylinder with radial fins in cross flow. Appl Therm Eng 112:214–225CrossRef

Breber G (1991) Heat transfer and pressure drop of stud finned tubes. AIChE Symp Ser 87(283):383–390

Burgess NK, Ligrani PM (2004) Effects of dimple depth on Nusselt numbers and friction factors for internal cooling in a channel. In: Proceedings of ASME Turbo Expo 2004 power for land, sea, and air, GT2004-54232

Carranza RG, Holtzapple MT (1991) A generalized correlation for pressure drop across spined pipe in cross-flow, part I. ASHRAE Trans 97(Pt. 2):122–129

Chang WR, Wang CC, Tsi WS, Shyu RJ (1995) Air-side performance of louver fin heat exchanger. In: Fletcher LS, Aihara T (eds) Proceedings of the ASME/JSME thermal engineering joint conference, vol 4, pp 367–372

Chen HT, Liou JT (1998) Optimum dimensions of the continuous plate fin for various tube arrays. Numer Heat Transf A 34:151–167CrossRef

Chen TY, Shu HT (2004) Flow structures and heat transfer characteristics in fan flows with and without delta-wing vortex generators. Exp Thermal Fluid Sci 28:273–282CrossRef

Chen Y, Fiebig M, Mitra NK (1998) Conjugate heat transfer of a finned oval tube, part B: heat transfer behaviours. Numer Heat Transf A 33(4):387–401CrossRef

Chen Y, Fiebig M, Mitra NK (2000) Heat transfer enhancement of finned oval tubes with staggered punched longitudinal vortex generators. Int J Heat Mass Transf 43:417–435MATHCrossRef

Chyu MK, Yu Y, Ding H, Downs JP, Soechting FO (1997) Concavity enhanced heat transfer in an internal cooling passage. ASME Paper No. 97-GT-437

Comini G, Nonino C, Savino S (2002) Convective heat and mass transfer in wavy finned-tube exchangers. Int J Numer Meth Heat Fluid Flow 12(6):735–755MATHCrossRef

Culham JR, Muzychka YS (2000) Optimization of plate fin heat sinks using entropy generation minimization. In: 2000 international society conference on thermal phenomena, Las Vegas, pp 8–15

DeJong NC, Jacobi AM (2003) Localized flow and heat transfer interactions in louvered-fin arrays. Int J Heat Mass Transf 46:443–455CrossRef

de Lieto Vollaro A, Grignaffini S, Gugliermetti F (1999) Optimum design of vertical rectangular fin arrays. Int J Therm Sci 38:525–529CrossRef

Du Y-J, Wang C-C (2000) An experimental study of the airside performance of the superslit fin-and-tube heat exchangers. Int J Heat Mass Transf 43:4475–4482CrossRef

Ebisu T (1999) Evaporation and condensation heat transfer enhancement for alternative refrigerants used in air-conditioning machines. In: Kakac S, Bergles AE, Mayinger F, Yuncu H (eds) Heat transfer enhancement of heat exchangers. Kluwer Academic Publishers, Dordrecht, pp 579–600CrossRef

Eckels PW, Rabas TJ (1985) Heat transfer and pressure drop performance of finned tube bundles. J Heat Transf 107:205–213CrossRef

Ekkad SV, Nasir H (2003) Dimple enhanced heat transfer in high aspect ratio channels. J Enhanc Heat Transf 10:395–406CrossRef

El-Sayed SA, Mohamed MS, Abdel-Latif AM, Abouda AE (2002) Investigation of turbulent heat transfer and fluid flow in longitudinal rectangular-fin arrays of different geometries and shrouded fin array. Exp Thermal Fluid Sci 26:879–900CrossRef

Elyyan M, Rozati A, Tafti D (2006) Study of flow structures and heat transfer in parallel fins with dimples and protrusions using large eddy simulation. In: Proc. ASME joint US-European fluids engineering summer meeting, Paper No. FEDSM2006-98113

Elyyan MA, Rozati A, Tafti DK (2008) Investigation of dimpled fins for heat transfer enhancement in compact heat exchangers. Int J Heat Mass Transf 51:2950–2966MATHCrossRef

Elyyan MA, Tafti DK (2009) Flow and heat transfer characteristics of dimpled multilouvered fins. J Enhanc Heat Trans 16(1):43–60CrossRef

Fiebig M, Mitra NK, Dong Y (1990) Simultaneous heat transfer enhancement and flow loss reduction on fin-tubes. In: Heat transfer 1990. Proceedings of the 9th international heat transfer conference, Jerusalem, vol 4, pp 51–56

Fiebig M, Valencia A, Mitra NK (1993) Wing-type vortex generators for fin-and-tube heat exchangers. Exp Therm Fluid Sci 7(4):287–295CrossRef

Fujii M, Sehimo Y, Yamanak G (1988) Heat transfer and pressure drop of perforated surface heat exchanger with passage enlargement and contraction. Int J Heat Mass Transf 31(1):135–142CrossRef

Fujii M, Seshimo Y, Yoshida T (1991) Heat transfer and pressure drop of tube-fin heat exchanger with trapezoidal perforated fins. In: Lloyd JR, Kurosake Y (eds) Proceedings of the 1991 ASME-JSME joint thermal engineering conference, vol 4. ASME, New York, pp 355–360

Furukawa Y, Yang WJ (2002) Reliability of heat sink optimization using entropy generation minimization. In: 8th AIAA/ASME joint thermo-physics and heat transfer conference, St. Louis, Missouri, AIAA-2002-3216 1–6

Gan YP, Lei DH, Wang S (1990) Enhancement of forced convection air cooling of block-like electronic components in in-line arrays. In: Bergles AE (ed) Heat transfer in electronic and microelectronic equipment. Hemisphere Publ. Corp, New York, pp 223–233

Garg VK, Maji PK (1988) Laminar flow and heat transfer in a periodically converging-diverging channel. Int J Numer Meth Fluids 8:579–597MATHCrossRef

Goldstein L Jr, Sparrow EM (1977) Heat/mass transfer characteristics for flow in a corrugated wall channel. J Heat Transf 99:187–195CrossRef

Gray DL, Webb RL (1986) Heat transfer and friction correlations for plate fin-and-tube heat exchangers having plain fins. In: Heat transfer 1986. Proceedings of the eighth international heat transfer conference, pp 2745–2750

Grossegorgemann A, Weber D, Fiebig M (1995) Experimental and numerical investigation of self-sustained oscillations in channels with periodic structures. Exp Thermal Fluid Sci 11(3):226–233CrossRef

Han H, He YL, Li YS, Wang Y, Wu M (2013) A numerical study on compact enhanced fin-and-tube heat exchangers with oval and circular tube configurations. Int J Heat Mass Transf 65(5):686–695CrossRef

Hatada T, Senshu T (1984) Experimental study on heat transfer characteristics of convex louver fins for air conditioning heat exchangers. ASME paper ASME 84-HT-74, New York

Hatada D, Ueda U, Oouchi T, Shimizu T (1989) Improved heat transfer performance of air coolers by strip fins controlling air flow distribution. ASHRAE Trans 95(Pt. 1):166–170

He FJ, Cao WW, Yan P (2012) Experimental investigation of heat transfer and flowing resistance for air flow cross over spiral finned tube heat exchanger. In: 2012 international conference on future electrical power and energy system, vol 17 (Part A), pp 741–749

Hitachi Cable Ltd (1984) Hitachi high-performance heat transfer tubes. Cat. No. EA-500. Hitachi Cable, Ltd., Tokyo, Japan

Holtzapple MT, Carranza RG (1990) Heat transfer and pressure drop of spined pipe in cross flow part III: air-side performance comparison to other heat exchangers. ASHRAE Trans 96(Part 2):136–141

Holtzapple MT, Allen AL, Lin K (1990) Heat transfer and pressure drop of spined pipe in cross flow. Part II: heat transfer studies. ASHRAE Trans 96(Part 2):130–135

Hwang GJ, Wu CC, Lin LC, Yang WJ (1996) Investigation of flow drag and forced convective heat transfer in perforated coolant channels. In: Transport phenomena in combustion, vol 2, Taylor & Francis. pp 1747–1758

Isaev SA, Leont’ev AI (2003) Numerical simulation of vortex enhancement of heat transfer under conditions of turbulent flow past a spherical dimple on the wall of a narrow channel. High Temp 41(5):655–679CrossRef

Jang JY, Chen LK (1997) Numerical analysis of heat transfer and fluid flow in a three- dimensional wavy-fin-and-tube heat exchanger. Int J Heat Mass Transf 40(16):3981–3990CrossRef

Jin Y, Tang GH, He YL, Tao WQ (2013) Parametric study and field synergy principle analysis of H-type finned tube bank with 10 rows. Int J Heat Mass Transf 60(1):241–251CrossRef

Jones TV, Russell CMB (1980) Efficiency of rectangular fins. In: Proc. 19th ASME/AIChE national heat transfer conference, Orlando, Florida, pp 27–30

Jubran BA, Al-Salaymeh AS (1996) Heat-transfer enhancement in electronic modules using ribs and “filmcooling-like” techniques. Int J Heat Fluid Flow 17:148–154CrossRef

Kakaç S, Bergles AE, Mayinger F, Yuncu H (1999) Heat transfer enhancement of heat exchangers, vol 1. Kluwer Academic Publishers, Dordrecht, the Netherlands, pp 75–105CrossRef

Kang HC, Webb RL (1998) Evaluation of the wavy fin geometry used in air cooled finned tube heat exchangers. In: Heat transfer 1998. Proceedings of the 11th international heat transfer conference, Kyongju, Korea, vol 6, pp 95–100

Khoshvaght-Aliabadi M, Khoshvaght M, Rahnama P (2016) Thermal-hydraulic characteristics of plate-fin heat exchangers with corrugated/vortex-generator plate-fin (CVGPF). Appl Therm Eng 98:690–701CrossRef

Kim NH, Yun JH, Webb RL (1997) Heat transfer and friction correlations for wavy plate fin-and-tube heat exchangers. Journal of heat transfer, 119(3), 560–567CrossRef

Kotcioglu I, Caliskan S (2008) Experimental investigation of a cross-flow heat exchanger with wing-type vortex generators. J Enhanc Heat Transf 15(2):113–127CrossRef

Kotcioglu I, Ayhan T, Olgun H, Ayhan B (1998) Heat transfer and flow structure in a rectangular channel with wing-type vortex generator. Tr J Eng Environ Sci 22:185–195

Kuan DY, Aris R, Davis HT (1984) Estimation of fin efficiencies of regular tubes arrayed in circumferential fins. Int J Heat Mass Transf 27:148–151CrossRef

Kundu B, Das PK (2007) Optimum dimensions of plate fins for fin-tube heat exchangers. Int J Heat Fluid Flow 18:530–537CrossRef

Kwak KM, Torii K, Nishino K (2003) Heat transfer and pressure loss penalty for the number of tube rows of staggered finned-tube bundles with a single transverse row of winglets. Int J Heat Mass Transf 46:175–180CrossRef

LaPorte GE, Osterkorn CL, Marino SM (1979) Heat transfer fin structure. U. S. Patent 4,143,710

Ledezma G, Bejan A (1996) Heat sinks with sloped plate fins in natural and forced convection. Int J Heat Mass Transf 39:1773–1783CrossRef

Lee S (1995) Optimum design and selection of heat sinks. IEEE Trans Compon Packaging Manuf Technol 18:812–817CrossRef

Lee CP, Yang WJ (1978) Augmentation of convective heat transfer from high-porosity perforated surfaces. Heat Mass Transf Toronto 2:589–594

Lemouedda A, Schmid A, Franz E, Breuer M, Delgado A (2012) Numerical investigations for the optimization of serrated finned-tube heat exchangers. Appl Therm Eng 31(8):1393–1401

Leon O, De Mey G, Dick E (2002) Study of the optimal layout of cooling fins in forced convection cooling. Microelectron Reliab 42:1101–1111CrossRef

Leu JS, Wu YH, Jang JY (2004) Heat transfer and fluid flow analysis in plate-fin and tube heat exchangers with a pair of block shape vortex generators. Int J Heat Mass Transf 47:4327–4338CrossRef

Liang CY, Yang WJ (1975a) Heat transfer and friction loss performance of perforated heat exchanger surface. ASME Heat Transf Conf 97:9–15CrossRef

Liang CY, Yang WJ (1975b) Modified single blow technique for performance evaluation on heat transfer surface. ASME Heat Transf Conf 97:16–21CrossRef

Liang CY, Yang WJ, Hung YY (1977) Perforated-fin type compact heat exchangers for gas turbines. 1977 Tokyo Joint Gas Turbine Congress, pp 77–85

Liao G (1990) Experimental investigation of pressure drop and heat transfer of three dimensional internally finned tubes. J Eng Thermophys 04:422–425. (in Chinese)

Ligrani PM, Harrison JL, Mahmood GI, Hill ML (2001) Flow structure due to dimple depressions on a channel surface. Phys Fluids 13(11):3442–3451MATHCrossRef

Ligrani P, Burgess N, Won S (2005) Nusselt numbers and flow structure on and above a shallow dimpled surface within a channel including effects of inlet turbulence intensity level. J Turbomach 127:321–330CrossRef

Lin YL, Shih TIP, Chyu MK (1999) Computations of flow and heat transfer in a channel with rows of hemispherical cavities. In: Proc ASME Turbo Expo 1999:99-GT-263

Lozza G, Merlo U (2001) An experimental investigation of heat transfer and friction losses of interrupted and wavy fins for fin-and-tube heat exchangers. Int J Refrig 24:409–416CrossRef

Lyman AC, Stephen RA, Thole KA, Zhang LW, Memory SB (2002) Scaling of heat transfer coefficients along louvered fins. Exp Thermal Fluid Sci 26:547–563CrossRef

Mahmood GI, Hill ML, Nelson DL, Ligrani PM (2000) Local heat transfer and flow structure on and above a dimpled surface in a channel. In: Proc ASME Turbo Expo 2000, Paper No. 2000-GT-230

Maughan JR, Incropera PP (1987) Experiments on mixed convection heat transfer for airflow in a horizontal and inclined channel. Int J Heat Mass Transf 30:1307–1318CrossRef

Méndez RR, Sen M, Yang KY, McClain R (2010) Effect of fin spacing on convection in a plate fin and tube heat exchanger. Int J Heat Mass Transf 43:39–51CrossRef

Mirth DR, Ramadhyani S (1994) Correlation for predicting the air-side Nusselt numbers and friction factor in chilled water cooling coils. Exp Heat Transf 7:143–162CrossRef

Mittal R, Balachandar S (1995) Effect of three-dimensionality on the lift and drag of nominally two-dimensional cylinders. Phys Fluids 7:1841–1865MATHCrossRef

Moon HK, O’Connell TO, Glezer B (2000) Channel height effect on heat transfer and friction in a dimpled passage. J Eng Gas Turbine Power 122:307–313CrossRef

Muzychka YS, Kenway G (2009) A model for thermal-hydraulic characteristics of offset strip fin arrays for large Prandtl number liquids. J Enhanc Heat Transf 16(1):73–92CrossRef

Nakayama W, Xu LP (1983) Enhanced fins for air-cooled heat exchangers—heat transfer and friction factor correlations. In: Proceedings of the 1983 ASME-JSME thermal engineering conference, vol 1, pp 495–502

Nishimura T, Yoshino T, Kawamura Y (1987) Numerical flow analysis of pulsatile flow in a channel with symmetric wavy walls at moderate Reynolds numbers. J Chem Eng Japan 20(5):479–485CrossRef

O’Brien JE, Sohal MS, Wallstedt PC (2003) Heat transfer testing of enhanced finned tube bundles using the single blow technique. In: Proceedings of the 2003 ASME summer heat transfer conference, Nevada, USA, HT2003-47426

Ogulata RT, Doba F, Yílmaz T (2000) Irreversibility analysis of cross-flow heat exchangers. Energy Convers Manag 41:1585–1599CrossRef

Park J, Ligrani PM (2005) Numerical predictions of heat transfer and fluid flow characteristics for seven different dimpled surfaces in a channel. Numer Heat Transf A 47:209–232CrossRef

Park J, Desam PR, Ligrani PM (2004) Numerical predictions of flow structure above a dimpled surface in a channel. Numer Heat Transf A 45:1–20CrossRef

Patel VC, Chon JT, Yoon JY (1991a) Laminar flow over wavy walls. ASME Trans 113:574–578

Patel VC, Chon JT, Yoon JY (1991b) Turbulent flow over wavy walls. J Fluids Eng 113:578–583

Patrick WV, Tafti DK (2004) Computations of flow structures and heat transfer in a dimpled channel at low to moderate Reynolds number. In: Proc. 2004 ASME heat trans/fluids engineering summer conference, Paper No. HT-FED2004-56171

Rabas TJ, Myers GA, Eckels PW (1986) Comparison of the thermal performance of serrated high-finned tubes used in heat-recovery systems. In: Chiou JP, Sengupta S (eds) Heat transfer in waste heat recovery and heat rejection systems. ASME Symp. HTD, vol 59, pp 33–40

Rich DG (1975) Effect of the number of tube rows on heat transfer performance of smooth plate fin-and-tube heat exchangers. ASHRAE Trans 81(Part 1):307–319

Rosman EC, Carajilescov P, Saboya FEM (1984) Performance of one- and two-row tube and plate fin heat exchangers. ASME J Heat Transf 106:627–632CrossRef

Rutledge J, Sleicher CA (1994) Direct simulation of turbulent flow and heat transfer in a channel. Part II: a Green’s function technique for wavy walls. Commun Numer Meth Eng 10:489–496MATHCrossRef

Saboya FEM, Sparrow EM (1974) Local and average heat transfer coefficients for one- row plate fin- and tube-heat exchanger configurations. ASME J Heat Transf 96:265–272CrossRef

Saha AK, Acharya S (2003) Parametric study of unsteady flow and heat transfer in a pin-fin heat exchanger. Int J Heat Mass Transf 46:3815–3830CrossRef

Saha AK, Acharya S (2004a) Unsteady flow and heat transfer in parallel-plate heat exchangers with in-line and staggered array of posts. Numer Heat Transf A 45:101–133CrossRef

Saha AK, Acharya S (2004b) Unsteady simulation of turbulent flow and heat transfer in a channel with periodic array of cubic pin-fins. Numer Heat Transf A 46:731–763CrossRef

Sahin B, Yakut K, Kotcioglu I, Çelik C (2005) Optimum design parameters of a heat exchanger. Appl Energy 82:90–106CrossRef

Sohankar A (2007) Heat transfer augmentation in a rectangular channel with a V-shaped vortex generator. Int J Heat Fluid Flow 28:306–317CrossRef

Somchai W, Yutasak C (2005) Effect of fin pitch and number of tube rows on the air side performance of herringbone wavy fin and tube heat exchangers. Energy Convers Manag 46:2216–2223CrossRef

Tafti DK, Zhang X (2001) Geometry effects on flow transition in multilouvered fins—onset, propagation, and characteristic frequencies. Int J Heat Mass Transf 44:4195–4210MATHCrossRef

Tafti DK, Zhang LW, Wang G (1999) Time-dependent calculation procedure for fully developed and developing flow and heat transfer in louvered fin geometries. Numer Heat Transf A 35:225–249CrossRef

Tahat M, Kodah ZH, Jarrah BA, Probert SD (2000) Heat transfers from pin-fin arrays experiencing forced convection. Appl Energy 67(4):419–442CrossRef

Tao YB, He YL, Wu ZG, Tao WQ (2007a) Numerical design of an efficient wavy fin surface based on the local heat transfer coefficient study. J Enhanc Heat Transf 14(4):315–332CrossRef

Tao YB, He YL, Huang J, Wu ZG, Tao WQ (2007b) Three-dimensional numerical study of wavy fin-and-tube heat exchangers and field synergy principle analysis. Int J Heat Mass Transf 50:1163–1175MATHCrossRef

Tiwari S, Maurya D, Biswas G, Eswaran V (2003) Heat transfer enhancement in cross-flow heat exchangers using oval tubes and multiple delta winglets. Int J Heat Mass Transf 46:2841–2856MATHCrossRef

Torii S, Yang WJ (2007) Thermal-fluid transport phenomena over slot-perforated flat fins with heat sink in forced convection environment. J Enhanc Heat Transf 14(2):123–134CrossRef

Torii K, Kwak K, Nishino K (2002) Heat transfer enhancement and pressure drop for fin-tube bundles with winglet vortex generators. In: Heat transfer 2002. Proceedings of the 12th international heat transfer conference, vol 4, pp 165–170

Torikoshi K, Kawabata K (1989) Heat transfer and flow friction characteristics of mesh finned air-cooled heat exchangers. In: Figliola RS, Kaviany M, Ebadian MA (eds) Convection heat transfer and transport processes, HTD, vol 116, pp 71–77

Wang G, Vanka SP (1995) Convective heat transfer in periodic wavy passages. Int J Heat Mass Transf 38(17):3219–3230MATHCrossRef

Wang C-C, Chang Y-J, Hsieh Y-C, Lin Y-T (1996) Sensible heat and friction characteristics of plate fin-and-tube heat exchangers having plane fins. Int J Refrig 19(4):223–230CrossRef

Wang CC, Fu WL, Chang CT (1997) Heat transfer and friction characteristics of typical wavy fin-and-tube heat exchangers. Heat Transf Friction Charact 14:174–186

Wang C-C, Chang C-T (1998) Heat and mass transfer for plate fin-and-tube heat exchangers with and without hydrophilic coating. Int J Heat Mass Transf 41:3109–3120CrossRef

Wang C-C, Chang Y-P, Chi K-Y, Chang Y-J (1998) A study of non-redirection louver fin-and-tube heat exchanges. J Mech Eng Sci, 212, SAE 17-212-C1-1

Wang C-C, Chang J-Y, Chiou N-F (1999a) Effects of waffle height on the air-side performance of wavy fin-and-tube heat exchangers. Heat Transf Eng 20(3):45–56CrossRef

Wang C-C, Du Y-J, Chang Y-J, Tao W-H (1999b) Airside performance of herringbone fin-and-tube heat exchangers in wet conditions. Can J Chem Eng 77:1225–1230CrossRef

Wang C-C, Jang J-Y, Chiou N-F (1999c) Heat transfer and friction correlation for wavy fin-and-tube heat exchangers. Int J Heat Mass Transf 42:1919–1924CrossRef

Wang C-C, Lee C-J, Chang C-T, Lin S-P (1999d) Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers. Int J Heat Mass Transf 42:1945–1956CrossRef

Wang C-C, Lee W-S, Sheu W-J (2001) A comparative study of compact enhanced fin-and-tube heat exchangers. Int J Heat Mass Transf 44:3565–3573CrossRef

Wang CC, Hwang YM, Lin YT (2002a) Empirical correlations for heat transfer and flow friction characteristics of herringbone wavy fin-and-tube heat exchangers. Int J Refrig 25:673–680CrossRef

Wang CC, Lo J, Lin YT, Wei CS (2002b) Flow visualization of annular and delta winglet vortex generators in fin-and-tube heat exchanger application. Int J Heat Mass Transf 45:3803–3815CrossRef

Wang CC, Lo J, Lin YT, Liu MS (2002c) Flow visualization of wave-type vortex generators having inline fin-tube arrangement. Int J Heat Mass Transf 45:1933–1944CrossRef

Wang Z, Yeo KS, Khoo BC (2003) Numerical simulation of laminar channel flow over dimpled surface. In: Proc. AIAA conference, Paper No. AIAA 2003-3964

Webb RL (1980) Air-side heat transfer in finned tube heat exchangers. Heat Transf Eng 1(3):33–49CrossRef

Webb RL (1987) Enhancement of single-phase heat transfer (Chapter 17). In: Kakac S, Shah RK, Aung W (eds) Handbook of single-phase heat transfer. Wiley, New York, pp 17.1–17.62

Webb RL (1990) Air-side heat transfer correlations for flat and wavy plate fin-and-tube geometries. ASHRAE Trans 96(Part 2):445–449

Webb RL, Kim NY (2005) Principles of enhanced heat transfer. Taylor & Francis, New York

Webb RL, Trauger P (1991) Flow structure in the louvered fin heat exchanger geometry. Exp Thermal Fluid Sci 4:205–217CrossRef

Weierman C (1976) Correlations ease the selection of finned tubes. Oil Gas J 74:94–100

Weierman C, Taborek J, Marner WJ (1978) Comparison of the performance of inline and staggered banks of tubes with segmented fins. AIChE Symp Ser 74(174):39–46

Won S, Ligrani P (2004) Numerical predictions of flow structure and local Nusselt number ratios along and above dimpled surfaces with different dimple depths in a channel. Numer Heat Transf A 46:549–570CrossRef

Wu JM, Tao WQ (2008) Numerical study on laminar convection heat transfer in a channel with longitudinal vortex generator. Part B: parametric study of major influence factors. Int J Heat Mass Transf 51:3683–3692MATHCrossRef

Xin RC, Li HZ, Kang HJ, Li W, Tao WQ (1994) An experimental investigation on heat transfer and pressure drop characteristics of triangular wavy fin-and-tube heat exchanger surfaces. J Xi’an Jiaotong Univ 28(2):77–83

Xin RC, Tao WQ (1988) Numerical prediction of laminar flow and heat transfer in wavy channels of uniform cross-sectional area. Num Heat Transf 14:465–481

Yoshii T, Yamamoto M, Otaki T (1973) Effects of dropwise condensate on wet heat transfer surface for air cooling oils. In: Proc. 13th international congress of refrigeration, pp 285–292

Youn B, Kil Y-H, Park H-Y, Yoo K-C, Kim Y-S (1998) Experimental study of pressure drop and heat transfer characteristics of 10.07 mm wave and wave-slit fin-tube heat exchangers with wave depth of 2 mm. In: Heat transfer 1998. Proceedings of the 11th international heat transfer conference, vol 6, Kyongju, Korea

Youn B, Kim Y-S, Park H-Y, Kim N-H (2003) An experimental investigation on the airside performance of fin-and-tube heat exchangers having radial slit fins. J Enhanc Heat Transf 10:61–80CrossRef

Yun J-Y, Lee K-S (2000) Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins. Int J Heat Mass Transf 43:2529–2539MATHCrossRef

Zabronsky H (1955) Temperature distribution and efficiency of a heat exchanger using square fins on round tubes. ASME J Appl Mech 22:119–122MATH

Zhang X, Tafti DK (2001) Classification and effects of thermal wakes on heat transfer in multilouvered fins. Int J Heat Mass Transf 44:2461–2473MATHCrossRef

Zhang LW, Tafti DK, Najjar FM, Balachandar S (1997) Computations of flow and heat transfer in parallel-plate fin heat exchangers on the CM-5: effects of flow unsteadiness and three-dimensionality. Int J Heat Mass Transf 40(6):1325–1341MATHCrossRef

Zhang JN, Cheng M, Ding YD, Fu Q, Chen ZY (2019) Influence of geometric parameters on the gas-side heat transfer and pressure drop characteristics of three-dimensional finned tube. Int J Heat Mass Transf 133:192–202CrossRef

Zukauskas A (1972) Heat transfer from tubes in crossflow. In: Hartnett JP, Irvine TF (eds) Advances in heat transfer, vol 8. Academic Press, New York, pp 93–160

Titel: Enhanced Plate Fin Geometries with Round Tubes and Enhanced Circular Fin Geometries
verfasst von: Sujoy Kumar Saha
Hrishiraj Ranjan
Madhu Sruthi Emani
Anand Kumar Bharti
Verlag: Springer International Publishing
Buch: Heat Transfer Enhancement in Externally Finned Tubes and Internally Finned Tubes and Annuli
Print ISBN: 978-3-030-20747-2

Electronic ISBN: 978-3-030-20748-9

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-20748-9_4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht