Anzeige
Erschienen in:
01.03.2011 | Erratum
Erratum to: Formation of Low-Friction Particle/Polymer Composite Tribofilms by Tribopolymerization
Erschienen in: Tribology Letters | Ausgabe 3/2011
EinloggenAktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Excerpt
The original version of this article unfortunately contained a mistake. The values of the wear rates given Table 2 and Figure 2 have been corrected because of a systematic calculation error giving wrong values by a factor of 16.
Table 2
Summary of friction coefficients (μ) and wear rates from reciprocal sliding tests of different additives in PAO
|
μ (3 Hz)
|
Wear rate (3 Hz) (μm3/Nm)
|
μ (10 Hz)
|
Wear rate (10 Hz) (μm3/Nm)
|
|
|---|---|---|---|---|
|
No additives
|
0.12
|
40
|
0.11
|
25
|
|
Monomer
|
0.077
|
13
|
0.069
|
3.4
|
|
IF (1%)
|
0.092
|
45
|
0.071
|
5.6
|
|
IF (5%)
|
0.083
|
27
|
0.071
|
9.8
|
|
Monomer + IF
|
0.065
|
7.2
|
0.054
|
1.4
|
|
2H (1%)
|
0.13
|
101
|
0.066
|
4.1
|
|
2H (5%)
|
0.14
|
106
|
0.073
|
8.5
|
|
Monomer + 2H
|
0.065
|
8.7
|
0.057
|
2.5
|
|
Zn-DTP
|
0.09
|
11
|
0.073
|
3.7
|
|
Zn-DTP + IF
|
0.097
|
7.8
|
0.079
|
4.0
|
Fig. 2
Schematic presentation of the results from reciprocal sliding tests in PAO, given in Table 2, also showing the different spreads in the results; the highest and lowest observed friction coefficient and wear rate for each additive combination. Sliding speed of (a) 3 Hz and (b) 10 Hz. Load 10 N (1 GPa)
× ![]()
…