nach oben

Zeitschrift

European Journal of Wood and Wood Products

Holz als Roh- und Werkstoff

Brief Original
Electrical resistance characteristics of thermally modified wood
Original Article
Feasibility of incorporating thermally treated lignocellulosic waste in particleboard composites
Original Article
Evaluation of some mechanical and physical properties of ‘Oriented Strand Board (OSB/3)’ following cyclic accelerated aging tests
Original Article
Development of load tables for design of full-culm bamboo

Kostenlos testen Zur aktuellen Ausgabe

European Journal of Wood and Wood Products OnlineFirst articles

02.07.2022 | Original Article

The effect of ultrasonic process on the shear strength and the microstructure of the bonding interface of laminated bamboo lumber

The aim of this study was to understand the effect of ultrasonic treatment on the bonding shear strength and the microstructure of bonding interface and adhesive penetration of the laminated bamboo lumber. The ultrasonic cavitation treatment was …

28.06.2022 | Original Article

Effect of sand blasting treatment on green colour preservation and surface characteristics of Moso bamboo culms

Green colour preservation of bamboo surface is an efficient approach to improve the aesthetic and economic values of bamboo. Previous research on bamboo green colour preservation used large amounts of chemicals, which limited its practical …

28.06.2022 | Original Article

Bond strength prediction of timber-FRP under standard and acidic/alkaline environmental conditions based on gene expression programming

Timber is widely used as a construction material; however, the environmental deterioration of timber is a crucial problem for the construction industry. Fiber-reinforced polymer (FRP) has been considered appropriate and beneficial for the repair …

23.06.2022 | Original Article

Physico-mechanical properties of arc-laminated giant bamboo using thermally modified segments

The lamination of thermally modified giant bamboo [Dendrocalamus asper (Schult.) Backer] arc segments was investigated. Two thermal modification treatments were used, viz., steam and hot oil immersion. Lamination of arc-shaped bamboo segments was …

21.06.2022 | Original Article

Study on infection behavior and characteristics of poplar wood dyed by Lasiodiplodia theobromae

The technology of dyeing wood by microorganisms is a kind of pollution-free and sustainable wood dyeing technology. To achieve fast and rich dyeing of Lasiodiplodia theobromae on the surface of poplar wood, tyrosinase and tricyclazole were used as …

» European Journal of Wood and Wood Products OnlineFirst articles

Aktuelle Ausgaben

Ausgabe 3/2022

Ausgabe 2/2022

Ausgabe 1/2022

Ausgabe 6/2021

Ausgabe 5/2021

Ausgabe 4/2021

Ausgabe 3/2021

Ausgabe 2/2021

Ausgabe 1/2021

Ausgabe 6/2020

Über diese Zeitschrift

European Journal of Wood and Wood Products reports on original research and new developments in the field of wood and wood products and their biological, chemical, physical as well as mechanical and technological properties, processes and uses. Subjects range from roundwood to wood based products, composite materials and structural applications, with related jointing techniques. Moreover, it deals with wood as a chemical raw material, source of energy as well as with inter-disciplinary aspects of environmental assessment and international markets.

European Journal of Wood and Wood Products aims at promoting international scientific communication and transfer of new technologies from research into practice.

Titel: European Journal of Wood and Wood Products
Abdeckung: Jahrgang 55/1997 - Jahrgang 80/2022
Verlag: Springer Berlin Heidelberg
Elektronische ISSN: 1436-736X
Print ISSN: 0018-3768
Zeitschriften-ID: 107
DOI: https://doi.org/10.1007/107.1436-736X