nach oben

Journal of Nondestructive Evaluation

Erschienen in:

01.12.2018

Evaluation of Fatigue Crack Orientation Using Non-collinear Shear Wave Mixing Method

verfasst von: Hongtao Lv, Jingpin Jiao, Bin Wu, Cunfu He

Erschienen in: Journal of Nondestructive Evaluation | Ausgabe 4/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, a non-collinear shear wave mixing technique is proposed for evaluation of fatigue crack orientation. Numerical analysis of the nonlinear interaction of two shear waves with crack is performed using two-dimensional finite-element simulations. The simulation results show that the nonlinear interaction of the two shears waves with cracks leads to the generation of transmitted and reflected sum-frequency longitudinal waves (SFLW), moreover the propagation direction of reflected SFLW is correlated with the orientation of crack, which can be used for crack orientation evaluation. Non-collinear wave-mixing experiments were conducted on specimens with fatigue crack. The experimental results show that the directivity of the generated SFLW agrees well with the simulation results, and non-collinear shear wave mixing has potential use in fatigue crack orientation evaluation.

Vorheriger Artikel Adaptive Cross Approximation Algorithm for Accelerating BEM in Eddy Current Nondestructive Evaluation

Nächster Artikel Damage Detection and Localization in Metallic Structures Based on Jointed Electromagnetic Waveguides: A Proof-of-Principle Study

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Andreaus, U., Baragatti, P., Casini, P., Lacoviello, D.: Experimental damage evaluation of open and fatigue cracks of multi-cracked beams by using wavelet transform of static response via image analysis. Struct. Control Health Monit. 24(4), e1902 (2017)CrossRef

Zhang, J., Drinkwater, B.W., Wilcox, P.D.: Defect characterization using an ultrasonic array to measure the scattering coefficient matrix. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 55(10), 2254–2265 (2008)CrossRef

Maslouhi, A.: Fatigue crack growth monitoring in aluminum using acoustic emission and acousto-ultrasonic methods. Struct. Control Health Monit. 18(7), 790–806 (2011)CrossRef

Zilberstein, V., Schlicker, D., Walrath, K., Weiss, V., Goldfine, N.: MWM eddy current sensors for monitoring of crack initiation and growth during fatigue tests and in service. Int. J. Fatigue 23, 477–485 (2001)CrossRef

An, Y.K., Kim, J.M., Sohn, H.: Laser lock-in thermography for detection of surface-breaking fatigue cracks on uncoated steel structures. NDT& E Int. 65, 54–63 (2014)CrossRef

Williams, J.J., Yazzie, K.E., Padilla, E., Chawla, N., Xiao, X., Carlo, F.D.: Understanding fatigue crack growth in aluminum alloys by in situ X-ray synchrotron tomography. Int. J. Fatigue 57, 79–85 (2013)CrossRef

Guan, R.Q., Lu, Y., Duan, W.H., Wang, X.M.: Guided waves for damage identification in pipeline structures: a review. Struct. Control Health Monit. 24(11), e2007 (2017)CrossRef

Lv, H.T., Jiao, J.P., Meng, X.J., He, C.F., Wu, B.: Characterization of nonlinear ultrasonic effects using the dynamic wavelet fingerprint technique. J. Sound Vib. 389, 364–379 (2017)CrossRef

Deng, M.X., Pei, J.F.: Assessment of accumulated fatigue damage in solid plates using nonlinear Lamb wave approach. Appl. Phys. Lett. 90(12), 121902 (2007)CrossRef

10.

Zhang, M.Y., Xiao, L., Qu, W.Z., Lu, Y.: Damage detection of fatigue cracks under nonlinear boundary condition using subharmonic resonance. Ultrasonics 77, 152–159 (2017)CrossRef

11.

Muller, M., Sutin, A., Guyer, R., Talmant, M., Laugier, P., Johnson, P.A.: Nonlinear resonant ultrasound spectroscopy (NRUS) applied to damage assessment in bone. J. Acoust. Soc. Am. 118(6), 3946–3952 (2005)CrossRef

12.

Novak, A., Bentahar, M., Tournat, V., Guerjouma, R., Simon, L.: Nonlinear acoustic characterization of micro-damaged materials through higher harmonic resonance analysis. NDT & E Int. 45(1), 1–8 (2012)CrossRef

13.

Tang, G., Liu, M., Jacobs, L.J., Qu, J.M.: Detecting localized plastic strain by a scanning collinear wave mixing method. J. Nondestruct. Eval. 33(2), 196–204 (2014)CrossRef

14.

Courtney, C.R.P., Neild, S.A., Wilcox, P.D., Drinkwater, B.W.: Application of the bispectrum for detection of small nonlinearities excited sinusoidally. J. Sound Vib. 329(20), 4279–4293 (2010)CrossRef

15.

Zhang, J.F., Li, S.Y., Xuan, F.Z., Yang, F.Q.: Effect of plastic deformation on nonlinear ultrasonic response of austenitic stainless steel. Mater. Sci. Eng., A 622, 146–152 (2015)CrossRef

16.

Zeitvogel, D.T., Matlack, K.H., Kim, J.Y., Jacobs, L.J., Singh, P.M., Qu, J.M.: Characterization of stress corrosion cracking in carbon steel using nonlinear Rayleigh surface waves. NDT & E Int. 62, 144–152 (2014)CrossRef

17.

Li, W., Cho, Y.: Thermal fatigue damage assessment in an isotropic pipe using nonlinear ultrasonic guided waves. Exp. Mech. 54(8), 1309–1318 (2014)CrossRef

18.

Dziedziech, K., Pieczonka, L., Kijanka, P., Staszewski, W.: Enhanced nonlinear crack-wave interactions for structural damage detection based on guided ultrasonic waves. Struct. Control Health Monit. 23(8), 1108–1120 (2016)CrossRef

19.

Deng, M.X., Gao, G.J., Xiang, Y.X., Li, M.L.: Assessment of accumulated damage in circular tubes using nonlinear circumferential guided wave approach: a feasibility study. Ultrasonics 75, 209–215 (2017)CrossRef

20.

Sun, M.X., Xiang, Y.X., Deng, M.X., Xu, J.C., Xuan, F.Z.: Scanning non-collinear wave mixing for nonlinear ultrasonic detection and localization of plasticity. NDT & E Int. 93, 1–6 (2018)CrossRef

21.

Demčenko, A., Akkerman, R., Nagy, P.B., Loendersloot, R.: Non-collinear wave mixing for non-linear ultrasonic detection of physical ageing in PVC. NDT & E Int. 49, 34–39 (2012)CrossRef

22.

Jones, G.L., Kobett, D.R.: Interaction of elastic waves in an isotropic solid. J. Acoust. Soc. Am. 35(1), 5–10 (1963)MathSciNetCrossRef

23.

Taylor, L.H., Rollins Jr., F.R.: Ultrasonic study of three-phonon interactions. I. Theory. Phys. Rev. 136(3A), A591 (1964)CrossRef

24.

Zarembo, L.K., Krasil’Nikov, V.A.: Nonlinear phenomena in the propagation of elastic waves in solids. Sov. Phys. Uspekhi 13(6), 778 (1971)CrossRef

25.

Korneev, V.A., Demčenko, A.: Possible second-order nonlinear interactions of plane waves in an elastic solid. J. Acoust. Soc. Am. 135(2), 591–598 (2014)CrossRef

26.

Blanloeuil, P., Meziane, A., Bacon, C.: 2D finite element modeling of the non-collinear mixing method for detection and characterization of closed cracks. NDT & E Int. 76, 43–51 (2015)CrossRef

27.

Demčenko, A., Koissin, V., Korneev, V.A.: Noncollinear wave mixing for measurement of dynamic processes in polymers: physical ageing in thermoplastics and epoxy cure. Ultrasonics 54(2), 684–693 (2014)CrossRef

28.

Zhang, Z., Nagy, P.B., Hassan, W.: Analytical and numerical modeling of non-collinear shear wave mixing at an imperfect interface. Ultrasonics 65, 165–176 (2016)CrossRef

29.

Croxford, A.J., Wilcox, P.D., Drinkwater, B.W., Nagy, P.B.: The use of non-collinear mixing for nonlinear ultrasonic detection of plasticity and fatigue. J. Acoust. Soc. Am. 126(5), EL117–EL122 (2009)CrossRef

30.

Jiao, J.P., Lv, H.T., He, C.F., Wu, B.: Fatigue crack evaluation using the non-collinear wave mixing technique. Smart Mater. Struct. 26(6), 065005 (2017)CrossRef

31.

Blanloeuil, P., Meziane, A., Norris, A.N., Baacon, C.: Analytical extension of finite element solution for computing the nonlinear far field of ultrasonic waves scattered by a closed crack. Wave Motion 66, 132–146 (2016)MathSciNetCrossRef

32.

Wooh, S.C., Shi, Y.: Optimum beam steering of linear phased arrays. Wave Motion 29(3), 245–265 (1999)CrossRef

33.

Salim, M.N., Hayashi, T., Murase, M., Kamiya, S.: Visualization and modal analysis of guided waves from a defect in a pipe. Jpn. J. Appl. Phys. 48(7S), 07GD06 (2009)

34.

NDT Education Resource Center, 2001–2014, The collaboration for NDT education, Iowa State University. www.ndt-ed.org

35.

Martinez Corredor, R., Santos, J.E., Gauzellino, P.M., Carcione, J.M.: Reflection and transmission coefficients of a single layer in poroelastic media. J. Acoust. Soc. Am. 135(6), 3151–3162 (2014)CrossRef

Titel: Evaluation of Fatigue Crack Orientation Using Non-collinear Shear Wave Mixing Method
verfasst von: Hongtao Lv
Jingpin Jiao
Bin Wu
Cunfu He
Publikationsdatum: 01.12.2018
Verlag: Springer US
Erschienen in: Journal of Nondestructive Evaluation / Ausgabe 4/2018
Print ISSN: 0195-9298
Elektronische ISSN: 1573-4862
DOI: https://doi.org/10.1007/s10921-018-0523-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2018

A Study on the Use of XCT and FEA to Predict the Elastic Behavior of Additively Manufactured Parts of Cylindrical Geometry

Study of the Choice of Excitation Frequency for Sub Surface Defect Detection in Electrically Thick Conducting Specimen Using Eddy Current Testing

Barkhausen Noise Measurement System Using a Three-Pole Probe

Imaging of Near-Surface Defects using Microwaves and Ultrasonic Phased Array Techniques

Damage Detection and Localization in Metallic Structures Based on Jointed Electromagnetic Waveguides: A Proof-of-Principle Study

Assessment of Adhesive Bond Strength from Ultrasonic Tone-Bursts

Premium Partner

Marktübersichten