Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2020 | OriginalPaper | Buchkapitel

Evaluation of Surface Integrity of Multi-stacked Glass Interplyed with Flax Laminate by Abrasive Waterjet Machining

verfasst von: M. Rajesh, K. Rajkumar, K. M. Nambiraj, K. Ramraji

Erschienen in: Advances in Lightweight Materials and Structures

Verlag: Springer Singapore

share
TEILEN

Abstract

This article presents an experimental investigation of surface integrity on glass/flax stacking layered composite machining using an abrasive waterjet energy process. Experimentation variables are SOD-standoff distance, HP-hydraulic pressure, and TR-traverse rate. As to conduct experimentation, the central composite design module (CCD) was employed. The experimentation assessment is to make an effective process parameter selection for surface integrity. Surface unevenness was predicted by using the RSM-based mathematical model. Analysis of variance was done for measuring relative weightage of process variables which affect the surface roughness. From the experiment, pressure was found to be the highest influencing variable for surface roughness. It was found Ra was continuously decreasing with an increase in hydraulic pressure energy. It also reduced with decreasing SOD and TR. Scanning electron microscope (SEM) image reveals the roughness variations along the cutting surface of the stacked laminate.

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
1.
Zurück zum Zitat Ramraji K, Rajkumar K, Sabarinathan P (2018) Tailoring of tensile and dynamic thermo mechanical properties of interleaved chemical-treated fi-ne almond shell particulate flax fiber stacked vinyl ester polymeric composites. Proc Inst Mech Eng Part L J Mater Design Appl 233(11):2311–2322 Ramraji K, Rajkumar K, Sabarinathan P (2018) Tailoring of tensile and dynamic thermo mechanical properties of interleaved chemical-treated fi-ne almond shell particulate flax fiber stacked vinyl ester polymeric composites. Proc Inst Mech Eng Part L J Mater Design Appl 233(11):2311–2322
2.
Zurück zum Zitat Praveen Kumar A, Kumarasamy GS, Nikhil N (2015) Analysis of carbon fiber reinforced polymer composite hip prosthesis based on static and dynamic loading. Int J Appl Eng Res 10(85):574–579 Praveen Kumar A, Kumarasamy GS, Nikhil N (2015) Analysis of carbon fiber reinforced polymer composite hip prosthesis based on static and dynamic loading. Int J Appl Eng Res 10(85):574–579
4.
Zurück zum Zitat Praveen Kumar A, Nalla Mohamed M, Kurien Philips K, Ashwin J (2016) Development of novel natural composites with fly ash reinforcements and investigation of their tensile properties. Appl Mech Mater 852:55–60 Praveen Kumar A, Nalla Mohamed M, Kurien Philips K, Ashwin J (2016) Development of novel natural composites with fly ash reinforcements and investigation of their tensile properties. Appl Mech Mater 852:55–60
5.
Zurück zum Zitat Dhanawade A, Kumar S (2017) Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jet. J Compos Mater 51(24):3373–3390 Dhanawade A, Kumar S (2017) Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jet. J Compos Mater 51(24):3373–3390
6.
Zurück zum Zitat Kumar D, Gururaja S (2019) Abrasive waterjet machining of Ti/CFRP/Ti laminate and multi-objective optimization of the process parameters using response surface methodology. J Comp Mater Kumar D, Gururaja S (2019) Abrasive waterjet machining of Ti/CFRP/Ti laminate and multi-objective optimization of the process parameters using response surface methodology. J Comp Mater
7.
Zurück zum Zitat Wang J, Kuriyagawa T, Huang CZ (2003) An experimental study to enhance the cutting performance in abrasive waterjet machining. Mach Sci Technol 7(2):191–207 Wang J, Kuriyagawa T, Huang CZ (2003) An experimental study to enhance the cutting performance in abrasive waterjet machining. Mach Sci Technol 7(2):191–207
8.
Zurück zum Zitat Pahuja R, Ramulu M, Hashish M (2019) Surface quality and kerf width prediction in abrasive water jet machining of metal-composite stacks. Compos B Eng 175:107134 Pahuja R, Ramulu M, Hashish M (2019) Surface quality and kerf width prediction in abrasive water jet machining of metal-composite stacks. Compos B Eng 175:107134
9.
Zurück zum Zitat Hashish M (1991) Advances in composite machining with abrasive-waterjets. Process Manuf Com Mater 49(27):93–111 Hashish M (1991) Advances in composite machining with abrasive-waterjets. Process Manuf Com Mater 49(27):93–111
10.
Zurück zum Zitat Babu MN, Muthukrishnan N (2014) Investigation on surface roughness in abrasive water-jet machining by the response surface method Mater Manuf Process 29:1422–1428 Babu MN, Muthukrishnan N (2014) Investigation on surface roughness in abrasive water-jet machining by the response surface method Mater Manuf Process 29:1422–1428
11.
Zurück zum Zitat Prabu VA, Kumaran ST, Uthayakumar M (2017) Performance evaluation of abrasive water jet machining on banana fiber reinforced polyester composite. J Nat Fibers 14(3):450–457 Prabu VA, Kumaran ST, Uthayakumar M (2017) Performance evaluation of abrasive water jet machining on banana fiber reinforced polyester composite. J Nat Fibers 14(3):450–457
12.
Zurück zum Zitat Selvam R, Karunamoorthy L, Arunkumar N (2017) Investigation on perfor-mance of abrasive water jet in machining hybrid composites. Mater Manuf Process 32(6):700–706 Selvam R, Karunamoorthy L, Arunkumar N (2017) Investigation on perfor-mance of abrasive water jet in machining hybrid composites. Mater Manuf Process 32(6):700–706
13.
Zurück zum Zitat Gnanavelbabu A, Rajkumar K, Saravanan P (2018) Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B4C-hBN hybrid metal matrix composites. Mater Manuf Process 33(12):1313–1323 Gnanavelbabu A, Rajkumar K, Saravanan P (2018) Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B4C-hBN hybrid metal matrix composites. Mater Manuf Process 33(12):1313–1323
14.
Zurück zum Zitat Kumar A, Singh H (2018) Kumar Study the parametric effect of abrasive wa-ter jet machining on surface roughness of Inconel 718 using RSM-BBD techniques. Mater Manuf Processes 33(13):1483–1490 Kumar A, Singh H (2018) Kumar Study the parametric effect of abrasive wa-ter jet machining on surface roughness of Inconel 718 using RSM-BBD techniques. Mater Manuf Processes 33(13):1483–1490
15.
Zurück zum Zitat Alberdi A, Suarez A, Artaza T (2013) Composite cutting with abrasive water jet. Proc Eng 63:421–429 Alberdi A, Suarez A, Artaza T (2013) Composite cutting with abrasive water jet. Proc Eng 63:421–429
16.
Zurück zum Zitat Azmir MA, Ahsan AK (2008) Investigation on glass/epoxy composite sur-faces machined by abrasive water jet machining. J Mater Process Technol 198(1–3):122–128 Azmir MA, Ahsan AK (2008) Investigation on glass/epoxy composite sur-faces machined by abrasive water jet machining. J Mater Process Technol 198(1–3):122–128
17.
Zurück zum Zitat Kalirasu S, Rajini N, Winowlin Jappes JT, Uthayakumar M, Rajesh S (2015) Mechanical and machining performance of glass and coconut sheath fibre polyester composites using AWJM. J Reinf Plast Compos 34(7):564–580 Kalirasu S, Rajini N, Winowlin Jappes JT, Uthayakumar M, Rajesh S (2015) Mechanical and machining performance of glass and coconut sheath fibre polyester composites using AWJM. J Reinf Plast Compos 34(7):564–580
18.
Zurück zum Zitat Singh J, Kumar M, Kumar S, Mohapatra SK (2017) Properties of glass-fiber hybrid composites: a review. Polym-Plast Technol Eng 56(5):455–469 Singh J, Kumar M, Kumar S, Mohapatra SK (2017) Properties of glass-fiber hybrid composites: a review. Polym-Plast Technol Eng 56(5):455–469
19.
Zurück zum Zitat Rao S, Sethi A, Das AK, Mandal N, Kiran P, Ghosh R, Dixit AR, Man-dal A (2017) Fiber laser cutting of CFRP composites and process optimization through response surface methodology. Mater Manuf Process 32(14):1612–1621 Rao S, Sethi A, Das AK, Mandal N, Kiran P, Ghosh R, Dixit AR, Man-dal A (2017) Fiber laser cutting of CFRP composites and process optimization through response surface methodology. Mater Manuf Process 32(14):1612–1621
20.
Zurück zum Zitat Dhanawade A, Kumar P, Kumar S (2020) Experimental study on abrasive water jet machining of carbon epoxy composite. Adv Mater Process Technol 6(1):40–53 Dhanawade A, Kumar P, Kumar S (2020) Experimental study on abrasive water jet machining of carbon epoxy composite. Adv Mater Process Technol 6(1):40–53
Metadaten
Titel
Evaluation of Surface Integrity of Multi-stacked Glass Interplyed with Flax Laminate by Abrasive Waterjet Machining
verfasst von
M. Rajesh
K. Rajkumar
K. M. Nambiraj
K. Ramraji
Copyright-Jahr
2020
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-7827-4_58

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.