Weitere Artikel dieser Ausgabe durch Wischen aufrufen
This study evaluates the compatibility of repair materials for concrete bridge decks. A new compatibility test set-up was designed and tested based on the concrete bridge deck cracking and delamination mechanism theory. The repair materials used in this study include lab formulated inorganic nano-aluminum silicates and commercially available organic two-part epoxy systems. Two different lab test-setups are proposed in this study: a prototype and a full-scale test. The developed test procedures were effective in communicating results in terms of compatibility of material properties, performance and quality. The prototype beams test can successfully serve as a small scale screening test providing insights on materials selection for the full-scale beam tests. The full-scale beams demonstrated the compatibility of the repaired system by providing data on authentic field conditions. Based on the observations it can be concluded that the proposed test setup is effective in examining the concrete bridge deck repair materials performance and selection, and compatibility in terms of mechanical properties and further guarantee the repaired structure safety.
AASHTO (American Association of State Highway and Transportation Officials). (2008). Bridging the gap. Washington, DC: AASHTO.
ACI (American Concrete Institute) Committee 224 report. (2001). Control of cracking in concrete structures. Farmington Hills, MI.
ACI (American Concrete Institute). (2011). Building code requirements for reinforced concrete-ACI 318. Farmington Hills, MI.
Arockiasamy, M. (2000). Evaluation of conventional repair techniques for concrete bridges. Tallahassee, FL: FDOT (Florida Department of Transportation).
ASCE (American Society of Civil Engineers). (2017). 2017 Report Card for America’s Infrastructure. Reston, VA.
ASTM (the American Society for Testing and Materials). (2005). Standard test method for bond strength of epoxy-resin systems used with concrete by slant shear. ASTM C882-05, West Conshohocken, PA.
ASTM (the American Society for Testing and Materials). (2008). Standard test method for flexural strength of concrete using simple beam with third-point loading. ASTM C78-08, West Conshohocken, PA.
ASTM (the American Society for Testing and Materials). (2013). Standard test method for tensile strength of concrete surfaces and the bond strength or tensile strength of concrete repair and overlay materials by direct tension (pull-off method). ASTM C1583/C1583 M – 13, West Conshohocken, PA.
Barbara, S. J., & Wayne, S. F. (1988). Bridge deck hollow plane repair using injected epoxy. Topeka, KS: KDOT (Kansas Department of Transportation).
Camille, A. I., & Debs, P. (2007). Experimental study of epoxy repairing of cracks in concrete. Construction and Building Materials, 21(1), 157–163. CrossRef
Chase, S., & Laman, J. (2000). Dynamics and field testing of bridges. Transportation in The new Millennium: State of the Art and future Directions, Perspectives from TRB (the Transportation Research Board Standing) Committees. Washington, DC.
Davidovits, J. (1991). Geopolymers: Inorganic polymeric new materials. Journal of Thermal Analysis, 37, 1633–1656. CrossRef
Do, J. Y., & Kim, D. K. (2012). AHP-based evaluation model for optimal selection process of patching materials for concrete repair: Focused on quantitative requirements. International Journal of Concrete Structures and Materials, 6(2), 87–100. CrossRef
Elgabbas, F., Ahmed, E., & Benmokrane, B. (2016). Experimental testing of concrete bridge-deck slabs reinforced with basalt FRP bars under concentrated loads. ASCE Journal of Bridge Engineering, 21(7), 04016029. CrossRef
ElSafty, A., & Abdel-Mohti, A. (2013). Investigation of likelihood of cracking in reinforced concrete bridge decks. International Journal of Concrete Structures and Materials, 7(1), 79–93. CrossRef
FDOT (Florida Department of Transportation). (1999). Bridge maintenance and repair handbook. Tallahassee, FL: FDOT. http://www.fdot.gov/maintenance/STR/IN/Maintenance_and_Repair_Handbook_08-13-11.pdf.
FHWA (Federal Highway Administration). (2009). Annual Materials Report on New Bridge Construction and Bridge Rehabilitation: National Bridge Inventory (NBI). Washington, DC.
Floyd, S. D. (2009). Repairing Bridge Deck Cracks. Epoxy bonding is an economical solution. Concrete Construction Magazine. http://www.concreteconstruction.net/products/decorative-concrete-surfaces/repairing-bridge-deck-cracks_o.
Garon, R. J. (2000). Effectiveness of high strength composites as structural and protective coatings for structural elements. Dissertation. New Brunswick, NJ: Rutgers, the State University of New Jersey.
Hammell, J. A. (2000). The influence of matrix composition and reinforcement type on the properties of polysialate composites. Dissertation. New Brunswick, NJ: Rutgers, the State University of New Jersey.
Iowa Department of Transportation. (2008). Inspection and acceptance epoxy resins. http://www.iowadot.gov/erl/archives/2009/oct/IM/content/491.19.pdf.
Krauss, P. D., Rogalla, E. A. (1996). Transverse cracking in newly constructed bridge decks: NCHRP Report 380. Washington, DC: Transportation Research Board, National Research Council.
Labib, E. L., Mo, Y. L., & Hsu, T. T. C. (2013). Shear cracking of prestressed girders with high strength concrete. International Journal of Concrete Structures and Materials, 7(1), 71–78. CrossRef
Leivo, J., Mika, L., Cilaine, V. T., Janne, P., Jessica, R., Erkki, L., et al. (2006). Sol-gel synthesis of a nanoparticulate aluminosilicate precursor for homogeneous mullite ceramics. Journal of Materials Research, 21(5), 1279–1285. CrossRef
Loadstar Sensors. (2016). Software for load sensors. http://www.loadstarsensors.com/software.html?view=default.
Matthew, K. (2013). Nondestructive repair and rehabilitation of structural elements using high strength inorganic polymer composites. Dissertation. New Brunswick, NJ: Rutgers, the State University of New Jersey.
Matthew, K., Venkiteela, G., Husam, N., & Balaguru., P. N. (2011). Nanoscale materials for non-destructive repair of transportation infrastructures. In Proceedings of SPIE 7983, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security. San Diego, CA.
NCHRP (National Cooperative Highway Research Program) Synthesis 375. (2007). Bridge inspection practices. Washington, DC.
NJDOT (New Jersey Department of Transportation). (2007). Highways carrying bridges in New Jersey. http://www.state.nj.us/transportation/refdata/bridgereport102007.pdf.
PCA (Portland Cement Association). (1970). Final report: Durability of concrete bridge decks. Skokie, IL.
Ramseyer, C., & Kang, T. H. K. (2012). Post-damage repair of prestressed concrete girders. International Journal of Concrete Structures and Materials, 6(3), 199–207. CrossRef
Richard, L. E., Balaguru, P. N., Andrew, F., Usman, S., Joseph, D., & Michel, D. (1997). Fire resistant aluminosilicate composites. Fire and Materials, 21(1), 67–73.
Rodler, D. J., Whitney, D. P., Fowler, D. W., & Wheat, D. L. (1989). Repair of cracked concrete with high molecular weight methacrylate monomers. Polymers in concrete advantages and applications: ACI SP-116, Farmington Hills, MI.
SealBoss. (2012). Sealboss 4040 LV Epoxy Resin. Product Data Sheet, SealBoss Corporation, Santa Ana, CA.
Smoak, W. G. (1996). Guide to concrete repair. Denver, CO: Bureau of Reclamation.
Soltani, A., Harries, K. A., & Shahrooz, B. M. (2013). Crack opening behavior of concrete reinforced with high strength reinforcing steel. International Journal of Concrete Structures and Materials, 7(4), 253–264. CrossRef
Soriano, A. (2002). Alternative sealants for bridge decks: Final report. Pierre, SD: South Dakota Dept. of Transportation Office of Research.
Stratton, F. W., & McCollom, B. F. (1974). Repair of hollow or softened areas in bridge decks by rebonding with injected epoxy resin or other polymers. Topeka: State Highway Commission of Kansas.
Woo, R. S. C., Honggang, Z., Michael, M. K. C., Christopher, K. Y. L., & Jang-Kyo, K. (2008). Barrier performance of silane-clay nanocomposite coatings on concrete structure. Composites Science and Technology, 68(14), 2828–2836. CrossRef
- Evaluation of the Compatibility of Repair Materials for Concrete Structures
Perumalsamy Naidu Balaguru
- Springer Netherlands
International Journal of Concrete Structures and Materials
Print ISSN: 1976-0485
Elektronische ISSN: 2234-1315