nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

13.07.2021 | ORIGINAL ARTICLE

Experimental investigation and optimization of delamination factors in the drilling of jute fiber–reinforced polymer biocomposites with multiple estimators

verfasst von: Bachir Adda, Ahmed Belaadi, Messaouda Boumaaza, Mostefa Bourchak

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 9-10/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Currently, the manufacture of composite structures often requires material removal operations using a cutting tool. Indeed, since biocomposites are generally materials that do not conduct electricity, electro-erosion cannot be utilized. As a result, the processes that can be used not only the unconventional method of abrasive water jet but also conventional machining, such as drilling. Delamination factors (F_d) are widely recognized for controlling the damaged area (delamination) induced by drilling in industry. As discussed in the literature, several approaches are available to evaluate and quantify the delamination surrounding a hole. In this context, the objective of this study is to compare the three F_d evaluation methods that have been most frequently used in previous investigations. To this end, three spindle and feed speeds and three Brad and Spur drills (BSD) tool diameters were selected (L₂₇) for drilling 155-g/m² density jute fabric–reinforced polyester biocomposites. The desirability function (DF) was further made to optimize the drilling parameters. The response surface methodology (RSM) and artificial neural networks (ANNs) were applied to validate the results obtained experimentally as well as to predict the behavior of the structure depending on the cutting conditions.

Vorheriger Artikel Surface and interior residual stress analysis of a deep-drawn 1180-MPa class ultra-high strength steel sheet with scratch marks

Nächster Artikel Numerical and experimental study on the flow characteristics and the erosive ability of magnetorheological jet

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Atagur M, Seki Y, Oncu O, Sever K, Seki Y, Sarikanat M, Altay L (2020) Evaluating of reinforcing effect of Ceratonia Siliqua for polypropylene: tensile, flexural and other properties. Polym Test 89:106607. https://doi.org/10.1016/j.polymertesting.2020.106607CrossRef

Sarasini F, Tirillò J, Lampani L, Sasso M, Mancini E, Burgstaller C, Calzolari A (2019) Static and dynamic characterization of agglomerated cork and related sandwich structures. Compos Struct 212:439–451. https://doi.org/10.1016/j.compstruct.2019.01.054CrossRef

Belaadi A, Bourchak M, Aouici H (2016) Mechanical properties of vegetal yarn: statistical approach. Compos Part B Eng 106:139–153. https://doi.org/10.1016/j.compositesb.2016.09.033CrossRef

Belaadi A, Amroune S, Bourchak M (2019) Effect of eco-friendly chemical sodium bicarbonate treatment on the mechanical properties of flax fibres: Weibull statistics. Int J Adv Manuf Technol 106:1753–1774. https://doi.org/10.1007/s00170-019-04628-8CrossRef

Zhou Y, Fan M, Chen L (2016) Interface and bonding mechanisms of plant fibre composites: an overview. Elsevier Ltd

Rajmohan T, Vinayagamoorthy R, Mohan K (2019) Review on effect machining parameters on performance of natural fibre–reinforced composites (NFRCs). J Thermoplast Compos Mater 32:1282–1302. https://doi.org/10.1177/0892705718796541CrossRef

Dutta S, Kim NK, Das R, Bhattacharyya D (2019) Effects of sample orientation on the fire reaction properties of natural fibre composites. Compos Part B Eng 157:195–206. https://doi.org/10.1016/j.compositesb.2018.08.118CrossRef

Merli R, Preziosi M, Acampora A, Lucchetti MC, Petrucci E (2020) Recycled fibers in reinforced concrete: a systematic literature review. J Clean Prod 248:119207. https://doi.org/10.1016/j.jclepro.2019.119207CrossRef

Cherief M, Belaadi A, Bouakba M, Bourchak M, Meddour I (2020) Behaviour of lignocellulosic fibre-reinforced cellular core under low-velocity impact loading: Taguchi method. Int J Adv Manuf Technol 108:223–233. https://doi.org/10.1007/s00170-020-05393-9CrossRef

10.

Boumaaza M, Belaadi A, Bourchak M (2020) The effect of alkaline treatment on mechanical performance of natural fibers-reinforced plaster: optimization using RSM. J Nat Fibers:1–21. https://doi.org/10.1080/15440478.2020.1724236

11.

Jaouadi M, M’sahli S, Sakli F (2009) Optimization and characterization of pulp extracted from the Agave Americana L. Fibers. Text Res J 79:110–120. https://doi.org/10.1177/0040517508090781CrossRef

12.

Bedjaoui A, Belaadi A, Amroune S, Madi B (2019) Impact of surface treatment of flax fibers on tensile mechanical properties accompanied by a statistical study. Int J Integr Eng 6:10–17

13.

Lotfi A, Li H, Dao DV (2019) Effect of drilling parameters on delamination and hole quality in drilling flax fiber reinforced bio-composites BT - sustainable design and manufacturing 2018. In: Howlett RJ, Setchi R, Vlacic L (eds) Dao D. Springer International Publishing, Cham, pp 71–81

14.

Lotfi A, Li H, Dao DV (2020) Analytical and experimental investigation of the parameters in drilling flax/poly(lactic acid) bio-composite laminates. Int J Adv Manuf Technol 109:503–521. https://doi.org/10.1007/s00170-020-05668-1CrossRef

15.

Benzannache N, Belaadi A, Boumaaza M, Bourchak M (2021) Improving the mechanical performance of biocomposite plaster/ Washingtonian filifira fibres using the RSM method. J Build Eng 33:101840. https://doi.org/10.1016/j.jobe.2020.101840CrossRef

16.

Benzidane R, Sereir Z, Bennegadi ML, Doumalin P, Poilâne C (2018) Morphology, static and fatigue behavior of a natural UD composite: the date palm petiole ‘wood.’. Compos Struct 203:110–123. https://doi.org/10.1016/j.compstruct.2018.06.122CrossRef

17.

Djoudi T, Hecini M, Scida D, Djebloun Y (2019) Physico-mechanical characterization of composite materials based on date palm tree fibers physico-mechanical characterization of composite materials based on date palm tree fibers. J Nat Fibers 0:1–14. https://doi.org/10.1080/15440478.2019.1658251, 18

18.

Mercy JL, Sivashankari P, Sangeetha M, Kavitha KR, Prakash S (2020) Genetic optimization of machining parameters affecting thrust force during drilling of pineapple fiber composite plates – an experimental approach. J Nat Fibers:1–12. https://doi.org/10.1080/15440478.2020.1788484

19.

Zhang H, Zhu P, Liu Z, Qi S, Zhu Y (2020) Research on prediction method of mechanical properties of open-hole laminated plain woven CFRP composites considering drilling-induced delamination damage. Mech Adv Mater Struct 0:1–16. https://doi.org/10.1080/15376494.2020.1745969

20.

Feito N, Díaz-Álvarez J, López-Puente J, Miguelez MH (2018) Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs. Compos Struct 184:1147–1155. https://doi.org/10.1016/j.compstruct.2017.10.061CrossRef

21.

Fernández-Pérez J, Cantero JL, Díaz-Álvarez J, Miguélez MH (2017) Influence of cutting parameters on tool wear and hole quality in composite aerospace components drilling. Compos Struct 178:157–161. https://doi.org/10.1016/j.compstruct.2017.06.043CrossRef

22.

Feito N, Diaz-Álvarez J, López-Puente J, Miguelez MH (2016) Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs. Compos Struct 138:285–294. https://doi.org/10.1016/j.compstruct.2015.11.065CrossRef

23.

Feito N, Diaz-Álvarez A, Cantero JL, Rodríguez-Millán M, Miguélez H (2016) Experimental analysis of special tool geometries when drilling woven and multidirectional CFRPs. J Reinf Plast Compos 35:33–55. https://doi.org/10.1177/0731684415612931CrossRef

24.

Díaz-Álvarez J, Olmedo A, Santiuste C, Miguélez MH (2014) Theoretical estimation of thermal effects in drilling of woven carbon fiber composite. Materials (Basel) 7:4442–4454. https://doi.org/10.3390/ma7064442CrossRef

25.

Díaz-Álvarez A, Rodríguez-Millán M, Díaz-Álvarez J, Miguélez MH (2018) Experimental analysis of drilling induced damage in aramid composites. Compos Struct 202:1136–1144. https://doi.org/10.1016/j.compstruct.2018.05.068CrossRef

26.

Bayraktar Ş, Turgut Y (2020) Determination of delamination in drilling of carbon fiber reinforced carbon matrix composites/Al 6013-T651 stacks. Measurement 154:107493. https://doi.org/10.1016/j.measurement.2020.107493CrossRef

27.

Geng D, Liu Y, Shao Z, Lu Z, Cai J, Li X, Jiang X, Zhang D (2019) Delamination formation, evaluation and suppression during drilling of composite laminates: a review. Compos Struct 216:168–186. https://doi.org/10.1016/j.compstruct.2019.02.099CrossRef

28.

Belaadi A, Laouici H, Bourchak M (2020) Mechanical and drilling performance of short jute fibre-reinforced polymer biocomposites: statistical approach. Int J Adv Manuf Technol 106:1989–2006. https://doi.org/10.1007/s00170-019-04761-4CrossRef

29.

Chaitanya S, Singh I (2018) Ecofriendly treatment of aloe vera fibers for PLA based green composites. Int J Precis Eng Manuf - Green Technol 5:143–150. https://doi.org/10.1007/s40684-018-0015-8CrossRef

30.

Bajpai PK, Singh I (2013) Drilling behavior of sisal fiber-reinforced polypropylene composite laminates. J Reinf Plast Compos 32:1569–1576. https://doi.org/10.1177/0731684413492866CrossRef

31.

Bajpai PK, Debnath K, Singh I (2015) Hole making in natural polylactic acid laminates: an experimental investigation. J Thermoplast Compos Mater 30:1–17. https://doi.org/10.1177/0892705715575094CrossRef

32.

Debnath K, Sisodia M, Kumar A, Singh I (2016) Damage-free hole making in fiber-reinforced composites: an innovative tool design approach. Mater Manuf Process 31:1400–1408. https://doi.org/10.1080/10426914.2016.1140191CrossRef

33.

Debnath K, Singh I, Dvivedi A (2014) Drilling characteristics of sisal fiber-reinforced epoxy and polypropylene composites. Mater Manuf Process 29:1401–1409. https://doi.org/10.1080/10426914.2014.941870CrossRef

34.

Debnath K, Singh I, Dvivedi A (2017) On the analysis of force during secondary processing of natural fiber-reinforced composite laminates. Polym Compos 38:164–174. https://doi.org/10.1002/pc.23572CrossRef

35.

Chaudhary V, Gohil PP (2016) Investigations on drilling of bidirectional cotton polyester composite. Mater Manuf Process 31:960–968. https://doi.org/10.1080/10426914.2015.1059444CrossRef

36.

Venkateshwaran N, ElayaPerumal A (2013) Hole quality evaluation of natural fiber composite using image analysis technique. J Reinf Plast Compos 32:1188–1197. https://doi.org/10.1177/0731684413486847CrossRef

37.

Athijayamani A, Thiruchitrambalam M, Natarajan U, Pazhanivel B (2010) Influence of alkali-treated fibers on the mechanical properties and machinability of roselle and sisal fiber hybrid polyester composite. Polym Compos 31:723–731. https://doi.org/10.1002/pc.20853CrossRef

38.

Ramesh M, Sri Ananda Atreya T, Aswin US et al (2014) Processing and mechanical property evaluation of banana fiber reinforced polymer composites. Procedia Eng 97:563–572. https://doi.org/10.1016/j.proeng.2014.12.284CrossRef

39.

Ismail SO, Dhakal HN, Dimla E, Beaugrand J, Popov I (2016) Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates. J Appl Polym Sci 133. https://doi.org/10.1002/app.42879

40.

De Olveira LÁ, Dos Santos JC, Panzera TH et al (2018) Investigations on short coir fibre-reinforced composites via full factorial design. Polym Polym Compos 26:391–399. https://doi.org/10.1177/0967391118806144CrossRef

41.

Abilash N, Sivapragash M (2016) Optimizing the delamination failure in bamboo fiber reinforced polyester composite. J King Saud Univ - Eng Sci 28:92–102. https://doi.org/10.1016/j.jksues.2013.09.004CrossRef

42.

Díaz-Álvarez A, Díaz-Álvarez J, Santiuste C, Miguélez MH (2019) Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites. Compos Struct 209:700–709. https://doi.org/10.1016/j.compstruct.2018.11.018CrossRef

43.

Babu GD, Babu KS, Gowd BUM (2012) Effects of drilling parameters on delamination of hemp fiber reinforced composites. Int J Mech Eng Res Dev 2:1–8

44.

Azuan SAS (2013) Effects of drilling parameters on delamination of coconut meat husk reinforced polyester composites. Adv Environ Biol 7:1097–1100. https://doi.org/10.1007/978-3-642-38345-8_6CrossRef

45.

Roy Choudhury M, Srinivas MS, Debnath K (2018) Experimental investigations on drilling of lignocellulosic fiber reinforced composite laminates. J Manuf Process 34:51–61. https://doi.org/10.1016/j.jmapro.2018.05.032CrossRef

46.

Belaadi A, Boumaaza M, Amroune S, Bourchak M (2020) Mechanical characterization and optimization of delamination factor in drilling bidirectional jute fibre-reinforced polymer biocomposites. Int J Adv Manuf Technol 111:2073–2094. https://doi.org/10.1007/s00170-020-06217-6CrossRef

47.

Rao YS, Mohan NS, Shetty N, Shivamurthy B (2019) Drilling and structural property study of multi-layered fiber and fabric reinforced polymer composite - a review. Mater Manuf Process 34:1549–1579. https://doi.org/10.1080/10426914.2019.1686522CrossRef

48.

Azuan SAS, Juraidi JM, Muhamad WMW (2012) Evaluation of delamination in drilling rice husk reinforced polyester composites. Appl Mech Mater 232:106–110. https://doi.org/10.4028/www.scientific.net/AMM.232.106CrossRef

49.

Aravindh S, Umanath K (2015) Delamination in drilling of natural fibre reinforced polymer composites produced by compression moulding. Appl Mech Mater 767:796–800. https://doi.org/10.4028/www.scientific.net/AMM.766-767.796CrossRef

50.

Sridharan V, Muthukrishnan N (2013) Optimization of machinability of polyester/modified jute fabric composite using grey relational analysis (GRA). Procedia Eng 64:1003–1012. https://doi.org/10.1016/j.proeng.2013.09.177CrossRef

51.

Sridharan V, Raja T, Muthukrishnan N (2016) Study of the effect of matrix , fibre treatment and graphene on delamination by drilling jute / epoxy nanohybrid composite. Arab J Sci Eng 41:10–14. https://doi.org/10.1007/s13369-015-2005-2CrossRef

52.

Yallew TB, Kumar P, Singh I (2015) A study about hole making in woven jute fabric-reinforced polymer composites. Proc IMechE Part L J Mater Des Appl 0:1–11. https://doi.org/10.1177/1464420715587750, 230

53.

Monteiro SN, Terrones LAH, D’Almeida JRM (2008) Mechanical performance of coir fiber/polyester composites. Polym Test 27:591–595. https://doi.org/10.1016/j.polymertesting.2008.03.003CrossRef

54.

Jayabal S, Natarajan U (2011) Drilling analysis of coir – fibre-reinforced polyester composites. Bull Mater Sci 34:1563–1567. https://doi.org/10.1007/s12034-011-0359-yCrossRef

55.

Durão LMP, Gonçalves DJS, Tavares JMRS, de Albuquerque VHC, Panzera TH, Silva LJ, Vieira AA, Baptista APM (2013) Drilling delamination outcomes on glass and sisal reinforced plastics. Mater Sci Forum 730–732:301–306. https://doi.org/10.4028/www.scientific.net/MSF.730-732.301CrossRef

56.

Çelik YH, Alp MS (2020) Determination of milling performance of jute and flax fiber reinforced composites. J Nat Fibers:1–15. https://doi.org/10.1080/15440478.2020.1764435

57.

Vinayagamoorthy R (2012) Analysis of cutting forces during milling of natural fibered composites using Fuzzy logic. Int J Compos Mater Manuf

58.

Chegdani F, El M, Chebbi A (2021) Cutting behavior of flax fibers as reinforcement of biocomposite structures involving multiscale hygrometric shear. Compos Part B 211:108660. https://doi.org/10.1016/j.compositesb.2021.108660CrossRef

59.

Díaz-Álvarez A, Díaz-Álvarez J, Cantero JL, Santiuste C (2020) Analysis of orthogonal cutting of biocomposites. Compos Struct 234:111734. https://doi.org/10.1016/j.compstruct.2019.111734CrossRef

60.

Chandramohan D, Rajesh S (2014) Study of machining parameters on natural fiber particle reinforced polymer composite material. Acad J Manuf Eng:12

61.

Ojo SO, Ismail SO, Paggi M, Dhakal HN (2017) A new analytical critical thrust force model for delamination analysis of laminated composites during drilling operation. Compos Part B Eng 124:207–217. https://doi.org/10.1016/j.compositesb.2017.05.039CrossRef

62.

Rezghi Maleki H, Hamedi M, Kubouchi M, Arao Y (2019) Experimental investigation on drilling of natural flax fiber-reinforced composites. Mater Manuf Process 34:283–292. https://doi.org/10.1080/10426914.2018.1532584CrossRef

63.

Nasir AAA, Azmi AI, Khalil ANM (2015) Parametric study on the residual tensile strength of flax natural fibre composites after drilling operation. Procedia Manuf 2:97–101. https://doi.org/10.1016/j.promfg.2015.07.017CrossRef

64.

Davim JP, Reis P (2003) Drilling carbon fiber reinforced plastics manufactured by autoclave—experimental and statistical study. Mater Des 24:315–324. https://doi.org/10.1016/S0261-3069(03)00062-1CrossRef

65.

Parthipan N, Ilangkumaran M, Maridurai T, Prasanna SC (2020) Effect of silane treated silicon (IV) oxide nanoparticle addition on mechanical, impact damage and drilling characteristics of kenaf fibre-reinforced epoxy composite. Silicon 12:459–467. https://doi.org/10.1007/s12633-019-00138-0CrossRef

66.

Rezghi Maleki H, Hamedi M, Kubouchi M, Arao Y (2019) Experimental study on drilling of jute fiber reinforced polymer composites. J Compos Mater 53:283–295CrossRef

67.

Ramesh M, Palanikumar K, Reddy KH (2014) Experimental investigation and analysis of machining characteristics in drilling hybrid glass-sisal-jute fiber reinforced polymer composites. In: 5th international & 26th all India manufacturing technology, design and research conference AIMTDR

68.

Vinayagamoorthy R, Rajeswari N, Karthikeyan S (2015) Investigations of damages during drilling of natural sandwich composites. In: Applied Mechanics and Materials. Trans Tech Publ, pp 812–817

69.

Vinayagamoorthy R, Rajeswari N, Sivanarasimha S, Balasubramanian K (2015) Fuzzy based optimization of thrust force and torque during drilling of natural hybrid composites. In: Applied Mechanics and Materials. Trans Tech Publ, pp 265–269

70.

Ramnath BV, Sharavanan S, Jeykrishnan J (2017) Optimization of process parameters in drilling of fibre hybrid composite using Taguchi and grey relational analysis. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing, p 12003

71.

Vinayagamoorthy R (2017) Parametric optimization studies on drilling of sandwich composites using the Box–Behnken design. Mater Manuf Process 32:645–653. https://doi.org/10.1080/10426914.2016.1232811CrossRef

72.

Pailoor S, Murthy HNN, Sreenivasa TN (2021) Drilling of in-line compression molded jute / polypropylene composites. J Nat Fibers 18:91–104. https://doi.org/10.1080/15440478.2019.1612309CrossRef

73.

Davim JP, Rubio JC, Abrao AM (2007) A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates. Compos Sci Technol 67:1939–1945. https://doi.org/10.1016/j.compscitech.2006.10.009CrossRef

74.

Babu J, Sunny T, Paul NA, Mohan KP, Philip J, Davim JP (2016) Assessment of delamination in composite materials: a review. Proc Inst Mech Eng Part B J Eng Manuf 230:1990–2003. https://doi.org/10.1177/0954405415619343CrossRef

75.

Vigneshwaran S, John KM, Deepak Joel Johnson R, Uthayakumar M, Arumugaprabu V, Kumaran ST (2020) Conventional and unconventional machining performance of natural fibre-reinforced polymer composites: a review. J Reinf Plast Compos 40:553–567. https://doi.org/10.1177/0731684420958103CrossRef

76.

Mohan NS, Kulkarni SM, Ramachandra A (2007) Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials. J Mater Process Technol 186:265–271. https://doi.org/10.1016/j.jmatprotec.2006.12.043CrossRef

77.

Mudhukrishnan M, Hariharan P, Palanikumar K (2020) Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills. Meas J Int Meas Confed 149:106973. https://doi.org/10.1016/j.measurement.2019.106973CrossRef

78.

Chen W-C (1997) Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. Int J Mach Tools Manuf 37:1097–1108. https://doi.org/10.1016/S0890-6955(96)00095-8CrossRef

79.

Majumder A (2010) Comparison of ANN with RSM in predicting surface roughness with respect to process parameters in Nd: YAG laser drilling. Int J Eng Sci Technol 2:5175–5186

80.

Karnik SR, Gaitonde VN, Davim JP (2008) A comparative study of the ANN and RSM modeling approaches for predicting burr size in drilling. Int J Adv Manuf Technol 38:868–883CrossRef

81.

Benardos PG, Vosniakos G-C (2003) Predicting surface roughness in machining: a review. Int J Mach Tools Manuf 43:833–844. https://doi.org/10.1016/S0890-6955(03)00059-2CrossRef

Titel: Experimental investigation and optimization of delamination factors in the drilling of jute fiber–reinforced polymer biocomposites with multiple estimators
verfasst von: Bachir Adda
Ahmed Belaadi
Messaouda Boumaaza
Mostefa Bourchak
Publikationsdatum: 13.07.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 9-10/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07628-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-10/2021

Simulating a high-speed abrasive particle impacting on a tensile block using SPH-FEM

3D printing of porcelain: finite element simulation of anisotropic sintering

A novel approach to modelling the bond characteristics between CFRP fabrics and steel plate joints under quasi-static tensile loads

Correction to: A new in-process material removal rate monitoring approach in abrasive belt grinding

A state-of-the-art review on sensors and signal processing systems in mechanical machining processes

Finite element methods used in clinching process

Premium Partner

Marktübersichten