nach oben

Bulletin of Engineering Geology and the Environment

Erschienen in:

01.08.2024 | Original Paper

Experimental study on liquefaction influence factors of saturated silty soil using orthogonal design method

verfasst von: Chunxia Huang, Tong Cao, Lin Wang, Liang Zhang, Yanshun Chen, Lei Wang

Erschienen in: Bulletin of Engineering Geology and the Environment | Ausgabe 8/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Silty soil is a transitional soil between clay and sand and is widely distributed around the world. With the rapid urban development and associated infrastructure need, silty soil has become more widely used as the bearing soil for foundations and roads. The liquefaction of silty soil under the earthquake can cause serious damage to buildings and infrastructure resting on such soil. Correctly analyzing the dynamic characteristics of silty soil in earthquake areas plays a major role in the success or failure of infrastructure construction. Therefore, it is particularly important to study the various factors affecting the dynamic characteristics of silty soil and to analyze the changing trend and associated mechanism on the dynamic characteristics of silty soil. In this paper, a set of cycle triaxial tests were carried out using the orthogonal design method to study the effects of four factors, namely initial void ratio, load frequency, clay content and silt content, on the dynamic characteristics of saturated silty soil at different levels. The orthogonal design method is used to study the order of influence of four factors on the dynamic strength and excess pore water pressure of silty soil, and the significance level of each factor was also assessed.

Vorheriger Artikel Integrated framework for geological modeling: integration of data, knowledge, and methods

Nächster Artikel Dynamic evolution of three-dimensional cracks in expansive soil under wet-dry cycles: insights from resistivity monitoring

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Akhila M, Rangaswamy K, Sankar N (2019) Undrained response and liquefaction resistance of sand–silt mixtures. Geotech Geol Eng 37:2729–2745CrossRef

Chen L, Zhang W, Zheng Y, Gu D, Wang L (2020) Stability analysis and design charts for over-dip rock slope against bi-planar sliding. Eng Geol 275:105732CrossRef

Dai BB, Yang J, Gu XQ et al (2019) A numerical analysis of the equivalent skeleton void ratio for silty sand. Geomech Eng 17(1):19–30

Daniela P, Valentina D (2016) Laboratory Study on Pore Pressure Generation and Liquefaction of Low-Plasticity Silty Sandy Soils during the 2012 Earthquake in Italy. J Geotech Geoenviron Eng 142(10):1–10

Darn HH, Vu TA (2014) Effects of silt contents on the static and dynamic properties of sand-silt mixtures. Geomech Eng 7(3):297–316CrossRef

Dash HK, Sitharam TG (2011) Cyclic liquefaction and pore pressure response of sand-silt mixtures. Geomech Eng 3(2):83–108CrossRef

El TA, Sadrekarimi A, El NH (2016) Cyclic resistance and liquefaction behavior of silt and sandy silt soils. Soil Dyn Earthq Eng 83:98–109CrossRef

Ersin G, Kamil BA (2021) Dynamic behavior of clayey sand over a wide range using dynamic triaxial and resonant column tests. Geomech Eng 24(2):105–113

GB 50021–2001 (2009) Code for investigation of geotechnical engineering. Ministry of Construction of People’s Republic of China, Beijing

GB/T 50123–2019 (2019) Standard for geotechnical testing method. Ministry of Housing and Urban-Rural Development of People’s Republic of China, Beijing

Hu J, Zhang L, Wei H, Du J (2018) Experimental study of the compressive strength of chemically reinforced organic-sandy soil. Geomech Eng 16(3):247–255

Huang FK, Tsai CC, Ge L, Lu CW, Chi CC (2022) Strength variations due to re-liquefaction—indication from cyclic tests on undisturbed and remold samples of a liquefaction-recurring site. Bull Eng Geol Env 81(3):117CrossRef

Huang C, Xu S, Shen Z, Zhang L, Wang L, Liu C (2023) Effects of non-plastic fines on liquefaction properties of saturated silt using discrete element modeling. Eng Geol 317:107091

Ishihara K, Okusa S, Oyagi N, Ischuk A (1990) Liquefaction-Induced Flow Slide in the Collapsible Loess Deposit in Soviet Tajik. J Japanese Soc Soil Mech Foundation Eng 30(4):73–89CrossRef

Jing LZ, Wang P, Zhang Z, Li Z, Cao Z, Zhang J, Yuan X, Wang W, Xing X (2017) Liquefaction in western Sichuan Basin during the 2008 Mw 7.9 Wenchuan earthquake. China Tectonophys 694:214–238CrossRef

Karakan E, Tanrinian N, Sezer A (2019) Cyclic undrained behavior and post liquefaction settlement of a nonplastic silt. Soil Dyn Earthq Eng 120:214–227CrossRef

Kurban O, Ertan B, Aşkin O, Tuncer B (2020) Effect of grain size on the shear strength of unsaturated silty soils. Geomech Eng 23(4):301–311

Li B, Fu Y, Hong Y et al (2021) Deterministic and probabilistic analysis of tunnel face stability using support vector machine. Geomech Eng 25(1):17–30

Liu XQ, Liu JK, Tian YH et al (2021) Effect of Dynamic Load and Cooling Path on the Frost Characteristics of Saturated Lean Clay. Trans Geotech 31(22):100645CrossRef

Misko C, Nikolaos N (2023) 8th Ishihara lecture: Holistic evaluation of liquefaction response. Soil Dyn Earthq Eng 168:107777CrossRef

Pongpipat A, Jerry AY, Victor K (2012) Stress-Strain and Strength Characteristics of Silt-Clay Transition Soils. J Geotech Geoenviron Eng 138(10):1257–1265CrossRef

Poul VL, Jerry AY, Carl DL (2009) Effects of fines content on void ratio, compressibility, and static liquefaction of silty sand. Geomech Eng 1(1):1–15CrossRef

Prakash S, Sandoval JA (1992) Liquefaction of Low Plastic Silts. Soil Dyn Earthq Eng 11(7):373–379CrossRef

Puri VK (1984) Liquefaction behavior and dynamic properties loessial (silty) soils. University of Missouri-Rolla, Rolla

Seed HB, Idriss IM (1971) A Simplified procedure for evaluating soil liquefaction potential. J Soil Mech Foundations Div 97(14):1249–1273CrossRef

Siba K, Jean MF (2012) Liquefaction and post-liquefaction behaviour of a soft natural clayey soil. Geomech Eng 4(2):121–134CrossRef

Sonmezer YB, Kayabali K, Beyaz T, Fener M (2022) Influence of grain size ratio and silt content on the liquefaction potentials of silty sands. Geomech Eng 31(2):167–181

Sze HY, Yang J (2014) Failure Modes of Sand in Undrained Cyclic Loading: Impact of Sample Preparation. J Geotech Geoenviron Eng 140(1):152–169CrossRef

Tian H, Chen W, Yang D, Dai Y, Yang J (2016) Application of the orthogonal design method in geotechnical parameter back analysis for underground structures. Bull Eng Geol Env 75:239–249CrossRef

Tran TN, Hiroshi M, Hidemasa S et al (2022) Pore Water Pressure and Settlement of Clays under Cyclic Shear: Effects of Soil Plasticity and Cyclic Shear Direction. J Geotech Geoenviron Eng 148(2):1–11

Wang SY, Luna R, Zhao HH (2015) Cyclic and post-cyclic shear behavior of low-plasticity silt with varying clay content. Soil Dyn Earthq Eng 75:112–120CrossRef

Wang Z, Zhang W, Gao X, Liu H, Böhlke T (2020) Stability analysis of soil slopes based on strain information. Acta Geotech 15:3121–3134CrossRef

Zhang X, Zhang Y, Liu J, Liu X (2019) Orthogonal Test Analysis of Improved Silt with Fiber and Fly Ash. J Water Resource Architect Eng 17(1):36–40

Zhang J, Xiao S, Huang H, Zhou J (2020) Calibrating a standard penetration test based method for region-specific liquefaction potential assessment. Bull Eng Geol Env 79:5185–5204CrossRef

Titel: Experimental study on liquefaction influence factors of saturated silty soil using orthogonal design method
verfasst von: Chunxia Huang
Tong Cao
Lin Wang
Liang Zhang
Yanshun Chen
Lei Wang
Publikationsdatum: 01.08.2024
Verlag: Springer Berlin Heidelberg
Erschienen in: Bulletin of Engineering Geology and the Environment / Ausgabe 8/2024
Print ISSN: 1435-9529
Elektronische ISSN: 1435-9537
DOI: https://doi.org/10.1007/s10064-024-03803-w

Analysis of quartz content in muck based on artificial intelligence algorithms and laser-induced breakdown spectroscopy in TBM tunneling

Original Paper

Sensitivity of ordinary rock weathering tests to acid rock drainage

Review Paper

Global sensitivity analysis for evaluation of water level fluctuation of anchored and non-anchored slope on reservoir bank

Original Paper

On the collision problem of simulant debris flow particles against concrete barriers of various strengths

Original Paper

Integrated framework for geological modeling: integration of data, knowledge, and methods

Original Paper

Dynamic evolution of three-dimensional cracks in expansive soil under wet-dry cycles: insights from resistivity monitoring

Original Paper