nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

4. Fabrication and Characterization of MIEC Membranes

verfasst von : Xuefeng Zhu, Weishen Yang

Erschienen in: Mixed Conducting Ceramic Membranes

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Preparation method has a significant influence on the performance of MIEC membranes, because the membranes derived from different methods have different microstructures, defects, impurities, etc. In this chapter, the experimental methods related to the MIEC membranes are introduced, including the methods for the synthesis of ceramic powders, for the fabrication of MIEC membranes, and for the performance testing and characterization. The advantages and disadvantages of the methods for preparing ceramic powders and fabricating MIEC membranes are shown in this chapter to facilitate selecting proper methods in experiments.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Ionic Conductors and Aspects Related to High Temperature

Nächstes Kapitel Permeation Principle and Models

Shao ZP, Yang WS, Cong Y, Dong H, Tong JH, Xiong GX (2000) Investigation of the permeation behavior and stability of a Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ oxygen membrane. J Membr Sci 172:177–188CrossRef

Shao ZP (2000) Mixed oxygen ionic and electronic conducting membrane and its application in the partial oxidation of methane to synthesis gas process. Dissertation, University of Chinese Academy of Science

Peng RR, Xia CR, Fu QX, Meng GY, Peng DK (2002) Sintering and electrical properties of (CeO₂)_0.8(Sm₂O₃)_0.1 powders prepared by glycine-nitrate process. Mater Lett 56:1043–1047CrossRef

Tok AIY, Luo LH, Boey FYC (2006) Consolidation and properties of Gd_0.1Ce_0.9O_1.95 nanoparticles for solid-oxide fuel cell electrolytes. J Mater Res 21:119–124CrossRef

Liang JP (2015) Low temperature fabrication of dense gadolinia-doped ceria electrolyte with enhanced electrical conductivity. Electrochim Acta 178:321–328CrossRef

Wei Y (2012) Synthesis and optical properties of self-assembled 2D layered organic-inorganic perovskites for optoelectronics. Dissertation, l’École normale Supérieure de Cachan

Messing GL, Zhang S-C, Jayanthi GV (1993) Ceramic powder synthesis by spray pyrolysis. J Am Ceram Soc 76:2707–2726CrossRef

Meng XX, Pang ZB, Tan XY, Meng B, Yang NT (2006) Preparation of La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ ultra fine powder by spray pyrolysis method and its electrical property. Chin J Nonferrous Metals 16:2077–2082

Marrero-Lopez D, dos Santos-Gomez L, Canales-Vazquez J, Martin F, Ramos-Barrado JR (2014) Stability and performance of nanostructured La_0.8Sr_0.2MnO₃ cathodes deposited by spray-pyrolysis. Electrochim Acta 134:159–166CrossRef

10.

Marrero-Lopez D, Romero R, Martin F, Ramos-Barrado JR (2014) Effect of the deposition temperature on the electrochemical properties of La_0.6Sr_0.4Co_0.8Fe_0.2O_3−δ cathode prepared by conventional spray-pyrolysis. J Power Sources 255:308–317CrossRef

11.

Benel C, Darbandi AJ, Djenadic R, Evans A, Tolke R, Prestat M, Hahn H (2013) Synthesis and characterization of nanoparticulate La_0.6Sr_0.4CoO_3-δ cathodes for thin-film solid oxide fuel cells. J Power Sources 229:258–264

12.

Suda S, Takahashi S, kawana M, Yoshida H, Inagaki T (2006) Effects of atomization conditions on morphology and SOFC anode performance of spray pyrolyzed NiO-Sm_0.2Ce_0.8O_1.9-composite particles. Solid State Ionics 177:1219–1225

13.

Maric R, Fukui T, Ohara S, Yoshida H, Nishimura M, Inagaki T, Miura K (2000) Powder prepared by spray pyrolysis as an electrode material for solid oxide fuel cells. J Mater Sci 35:1397–1404CrossRef

14.

Kumar A, Devi PS, Das Sharma A, Maiti HS (2005) A novel spray-pyrolysis technique to produce nanocrystalline lanthanum strontium manganite powder. J Am Ceram Soc 88:971–973CrossRef

15.

Wei X, Hug P, Figi R, Trottmann M, Weidenkaff A, Ferri D (2010) Catalytic combustion of methane on nano-structured perovskite-type oxides fabricated by ultrasonic spray combustion. Appl Catal B Environ 94:27–37CrossRef

16.

Qi XW, Lin YS, Swartz SL (2000) Electric transport and oxygen permeation properties of lanthanum cobaltite membranes synthesized by different methods. Ind Eng Chem Res 39:646–653CrossRef

17.

Sfeir J, Vaucher S, Holtappels P, Vogtc U, Schindler H-J, Van Herle J, Suvorova E, Buffat P, Perret D, Xanthopoulos N, Bucheli O (2005) Characterization of perovskite powders for cathode and oxygen membranes made by different synthesis routes. J Eur Ceram Soc 25:1991–1995CrossRef

18.

Rahaman MN (2003) Ceramic processing and sintering. 2nd version, CRC press, Boca Raton

19.

Bender W (2007) Types of extrusion units. In: Hӓndle F (ed) Extrusion in ceramics. Springer, Berlin, p p73

20.

Clemens F (2007) Thermoplastic extrusion for ceramic bodies. In: Hӓndle F (ed) Extrusion in ceramics. Springer, Berlin, pp p307–p309

21.

Zhang YW, Su K, Zeng FL, Ding WZ, Lu XG (2013) A novel tubular oxygen-permeable membrane reactor for partial oxidation of CH₄ in coke oven gas to syngas. Int J Hydrog Energy 38:8783–8789CrossRef

22.

Zyryanov VV (2009) Fabrication of multilayer ceramic membranes. Asia Pac J Chem Eng 4:285–290CrossRef

23.

Howatt GN, Breckenridge RG, Brownlow JM (1947) Fabrication of thin ceramic sheets for capacitors. J Am Ceram Soc 30:237–242CrossRef

24.

Mistler RE, Twiname ER (2000) Tape casting: theory and practice. Wiley, Westerville

25.

Miller CF, Chen J, Carolan MF, Foster EP (2014) Advances in ion transport membrane technology for syngas production. Catal Today 228:152–157CrossRef

26.

Baumann S, Serra JM, Lobera MP, Escolástico S, Schulze-Küppers F, Meulenberg WA (2011) Ultrahigh oxygen permeation flux through supported Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ membranes. J Membr Sci 377:198–205CrossRef

27.

Cao ZW, Zhu XF, Li WP, Xu B, Yang LN, Yang WS (2015) Asymmetric dual-phase membranes prepared via tape-casting and co-lamination for oxygen permeation. Mater Lett 147:88–91CrossRef

28.

Li K (2007) Ceramic membranes for separation and reaction. Wiley, ChichesterCrossRef

29.

Li DF, Chung TS, Wang R, Liu Y (2002) Fabrication of fluoropolyimide/polyethersulfone (PES) dual-layer asymmetric hollow fiber membranes for gas separation. J Membr Sci 198:211–223CrossRef

30.

Wu ZT, Wang B, Li K (2010) A novel dual-layer ceramic hollow fibre membrane reactor for methane conversion. J Membr Sci 352:63–70CrossRef

31.

Li T, Wu ZT, Li K (2014) Single-step fabrication and characterisations of triple-layer ceramic hollow fibres for micro-tubular solid oxide fuel cells (SOFCs). J Membr Sci 449:1–8CrossRef

32.

Othman MHD, Droushiotis N, Wu ZT, Kelsall G, Li K (2011) High-performance, anode-supported, microtubular SOFC prepared from single-step-fabricated, dual-layer hollow fibers. Adv Mater 23:2480–2483CrossRef

33.

Chen IW, Wang XH (2000) Sintering dense nanocrystalline ceramics without final-stage grain growth. Nature 404:168–171CrossRef

34.

Figueiredo FM, Kharton VV, Viskup AP, Frade JR (2004) Surface enhanced oxygen permeation in CaTi_1−xFe_xO_3−δ ceramic membranes. J Membr Sci 236:73–80CrossRef

35.

Teraoka Y, Zhang HM, Furukawa N, Yamazoe N (1985) Oxygen permeation through perovskite-type oxides. Chem Lett 14:1743–1746CrossRef

36.

Zhu XF, Wang HH, Cong Y, Yang WS (2006) Structure and oxygen permeation of cerium light doped BaFeO_3−δ ceramic membranes. Solid State Ionics 117:2917–2921CrossRef

37.

Steele BCH (1968). In: Wachtman JB, Franklin AD (eds) Mass transport in oxides. NBS Special Publication 296. p 165

38.

Lankhorst MHR, Bouwmeester HJM, Verweij H (1997) Thermodynamics and transport of ionic and electronic defects in crystalline oxides. J Am Ceram Soc 80:2175–2198CrossRef

39.

Tikhonovich VN, Zharkovskaya OM, Naumovich EN, Bashmakov IA, Kharton VV, Vecher AA (2003) Oxygen nonstoichiometry of Sr(Co, Fe)O_3−δ-based perovskites I. Coulometric titration of SrCo_0.85Fe_0.10Cr_0.05O_3−δ by the two-electrode technique. Solid State Ionics 160:259–270CrossRef

40.

Mauvy F, Bassat JM, Boehm E, Manaud JP, Dordor P, Grenier JC (2003) Oxygen electrode reaction on Nd₂NiO_4+δ cathode materials: impedance spectroscopy study. Solid State Ionics 158:17–28CrossRef

41.

Leonide A, Ruger B, Weber A, Meulenberg WA, Ivers-Tiffee E (2010) Impedance study of alternative (La,Sr)FeO_3−δ and (La,Sr)(Co,Fe)O_3−δ MIEC cathode compositions. J Electrochem Soc 157:B234–B239CrossRef

42.

Diethelm S, Van Herle J (2004) Electrochemical characterisation of oxygen nonstoichiometry and transport in mixed conducting oxides-application to La_0.4Ba_0.6Fe_0.8Co_0.2O_3−δ. Solid State Ionics 174:127–134

43.

Adler SB (2004) Factors governing oxygen reduction in solid oxide fuel cell cathodes. Chem Rev 104:4791–4843CrossRef

44.

Crank J (1975) The mathematics of diffusion. Oxford University Press, Oxford

45.

Bouwmeester HJM, Song CL, Zhu JJ, Yi JX, van Sint Annaland M, Boukamp BA (2009) A novel pulse isotopic exchange technique for rapid determination of the oxygen surface exchange rate of oxide ion conductors. Phys Chem Chem Phys 11:9640–9643CrossRef

46.

Armstrong EN, Duncan KL, Wachsman ED (2011) Surface exchange coefficients of composite cathode materials using in situ isothermal isotope exchange. J Electrochem Soc 158:B283–B289CrossRef

47.

Armstrong EN, Duncan KL, Oh DJ, Weaver JF, Wachsman ED (2011) Determination of surface exchange coefficients of LSM, LSCF, YSZ, GDC constituent materials in composite SOFC cathodes. J Electrochem Soc 158:B492–B499CrossRef

48.

Armstrong EN, Duncan KL, Wachsman ED (2013) Effect of A and B-site cations on surface exchange coefficient for ABO₃ perovskite materials. Phys Chem Chem Phys 15:2298–2308CrossRef

Titel: Fabrication and Characterization of MIEC Membranes
verfasst von: Xuefeng Zhu
Weishen Yang
Verlag: Springer Berlin Heidelberg
Buch: Mixed Conducting Ceramic Membranes
Print ISBN: 978-3-662-53532-5

Electronic ISBN: 978-3-662-53534-9

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-662-53534-9_4