nach oben

Journal of Materials Science

Erschienen in:

21.06.2021 | Metals & corrosion

Facile fabrication and evaluation of self-healing Zn-Al layered double hydroxide superhydrophobic coating on aluminum alloy

verfasst von: Guang Zhu, Yan Zhao, Lin Liu, Liyuan Wang, Jun Wang, Sirong Yu

Erschienen in: Journal of Materials Science | Ausgabe 26/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The preparation of superhydrophobic coating on the surface of aluminum alloy can effectively improve its performance in the harsh environment. In this work, a superhydrophobic coating with water contact angle (WCA) up to 157.5 ± 0.5° and sliding angle less than 3° is prepared on aluminum alloy 6061 substrate by simple and environment-friendly hydrothermal reaction and stearic acid modification. The in situ growth coating is composed of Zn-Al layered double hydroxide and the morphology of the coating was a micro–nano composite structure with micro-sheet and nano-needle. The stearic acid is combined with the coating by physical adsorption and chemical bonding. The superhydrophobic coating imparts the properties of low adhesion, self-cleaning, and anti-corrosion to the aluminum alloy substrate, and it also has good high-temperature stability, acid and alkali resistance, mechanical stability and time durableness. The superhydrophobic coating can spontaneously recover 7 times after damaged by oxygen plasma etching. The outstanding comprehensive performance of the coating makes it a promising application for protection of aluminum alloy.

Graphical abstract

Vorheriger Artikel Mechanisms of passivation and chloride-induced corrosion of mild steel in sulfide-containing alkaline solutions

Nächster Artikel Effect of Co addition on hardness and electrical conductivity of Cu–Si alloys

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Caliies M, Quéré D (2005) On water repellency. Soft Matter 1:55–61. https://doi.org/10.1039/b501657fCrossRef

Gou X, Guo Z (2019) The superhydrophobic plant leaves: the variation in surface morphologies and wettability during the vegetation period. Langmuir 35:1047–1053. https://doi.org/10.1021/acs.langmuir.8b03996CrossRef

Wu C, Wu X, Zhao H, Xu B, Zhu L, Liu Y, Gao C (2020) Effect of sub-millimetre morphologies on the hydrophobicity of a copper surface prepared by WEDM. Surf Coat Tech 385:125455. https://doi.org/10.1016/j.surfcoat.2020.125455CrossRef

Nguyen SHT, Webb HK, Hasan J, Tobin MJ, Crawford RJ, Ivanova EP (2013) Dual role of outer epicuticular lipids in determining the wettability of dragonfly wings. Colloid Surf B 106:126–134. https://doi.org/10.1016/j.colsurfb.2013.01.042CrossRef

Barthlott W, Neinhuis C (1997) Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta 202:1–8. https://doi.org/10.1007/s004250050096CrossRef

Ma L, Wang J, Zhang Z, Kang Y, Ma L (2021) Preparation of a superhydrophobic TiN/PTFE composite film toward self-cleaning and corrosion protection applications. J Mater Sci 56:1413–1425. https://doi.org/10.1007/s10853-020-05364-1CrossRef

Liu H, Yang L, Zhan Y, Lan J, Shang J, Zhou M, Lin S (2021) A robust and antibacterial superhydrophobic cotton fabric with sunlight-driven self-cleaning performance for oil/water separation. Cellulose 28:1715–1729. https://doi.org/10.1007/s10570-020-03585-wCrossRef

Zhang H, Yin L, Liu X, Weng R, Wang Y, Wu Z (2016) Wetting behavior and drag reduction of superhydrophobic layered double hydroxides films on aluminum. Appl Surf Sci 380:178–184. https://doi.org/10.1016/j.apsusc.2016.01.208CrossRef

Guo F, Duan S, Wu D, Matsuda K, Wang T, Zou Y (2021) Facile etching fabrication of superhydrophobic 7055 aluminum alloy surface towards chloride environment anticorrosion. Corros Sci 182:109262. https://doi.org/10.1016/j.corsci.2021.109262CrossRef

10.

Li W, Zhang X, Yang J, Miao F (2013) In situ growth of superhydrophobic and icephobic films with micro/nanoscale hierarchical structures on the aluminum substrate. J Colloid Interf Sci 410:165–171. https://doi.org/10.1016/j.jcis.2013.07.063CrossRef

11.

Shi Y, Zhang Z, Su J, Zhang J (2015) EIS study on 2024–T3 aluminum alloy corrosion in simulated acid rain under cyclic wet-dry conditions. Mater Corros 56:701–706. https://doi.org/10.1002/maco.200503869CrossRef

12.

Zhang B, Xu W, Zhu Q, Sun Y, Li Y (2019) Mechanically robust superhydrophobic porous anodized AA5083 for marine corrosion protection. Corros Sci 158:108083. https://doi.org/10.1016/j.corsci.2019.06.031CrossRef

13.

Sebastian D, Yao CW, Lian I (2020) Multiscale corrosion analysis of superhydrophobic coating on 2024 aluminum alloy in a 3.5 wt% NaCl solution. MRS Commun 10:305–311. https://doi.org/10.1557/mrc.2020.24CrossRef

14.

Zhang B, Xu W, Zhu Q, Hou B (2021) Scalable, fluorine free and hot water repelling superhydrophobic and superoleophobic coating based on functionalized Al₂O₃ nanoparticles. J Mater Sci Technol 66:74–81. https://doi.org/10.1016/j.jmst.2020.06.035CrossRef

15.

Chen Z, Yan Z, Zhou H, Han F, Zhao L, Yan H (2021) One-step fabrication of the wear-resistant superhydrophobic structure on SiC_p/Al composite surface by WEDM. Surf Coat Tech 409:126876. https://doi.org/10.1016/j.surfcoat.2021.126876CrossRef

16.

Verho T, Bower C, Andrew P, Franssila S, Ikkala O, Ras RHA (2011) Mechanically durable superhydrophobic surfaces. Adv Mater 23:673–678. https://doi.org/10.1002/adma.201003129CrossRef

17.

Yin X, Yu S, Zhao Y, Liu E, Wang K (2019) A self-healing Ni₃S₂ superhydrophobic coating with anti-condensation property. J Taiwan Inst Chem E 99:268–275. https://doi.org/10.1016/j.jtice.2019.03.014CrossRef

18.

Wang X, Liu X, Zhou F, Liu W (2011) Self-healing superamphiphobicity. Chem Commun 47:2324–2326. https://doi.org/10.1039/c0cc04066eCrossRef

19.

Abolghasemi MM, Yousefi V, Amirshaghaghi A (2015) Preparation and evaluation of a layered double hydroxide film on a nanoporous anodic aluminum oxide/aluminum wire as a highly thermal-resistant solid-phase microextraction fiber. New J Chem 39:3019–3115. https://doi.org/10.1039/c4nj01998aCrossRef

20.

Li C, Gao L, Fan X, Zeng R, Zhi K (2020) In vitro degradation and cytocompatibility of a low temperature in-situ grown self-healing Mg-Al LDH coating on MAO-coated magnesium alloy AZ31. Bioact Mater 5:364–376. https://doi.org/10.1016/j.bioactmat.2020.02.008CrossRef

21.

Iqbal MA, Secchi M, Iqbal MA, Montagna M, Zanella C, Fedel M (2020) MgAl-LDH/graphene protective film: insight into LDH-graphene interaction. Surf Coat Tech 401:126253. https://doi.org/10.1016/j.surfcoat.2020.126253CrossRef

22.

Zhou M, Pang X, Wei L, Gao K (2015) Insitu grown superhydrophobic Zn-Al layered double hydroxides films on magnesium alloy to improve corrosion properties. Appl Surf Sci 337:172–177. https://doi.org/10.1016/j.apsusc.2015.02.086CrossRef

23.

Guo Y, Wang Q, Wang T (2011) Facile fabrication of superhydrophobic surface with micro/nanoscale binary structures on aluminum substrate. Appl Surf Sci 257:5831–5836. https://doi.org/10.1016/j.apsusc.2011.01.114CrossRef

24.

George G, Saravanakumar MP (2018) Correction to: Facile synthesis of carbon-coated layered double hydroxide and its comparative characterisation with Zn-Al LDH: application on crystal violet and malachite green dye adsorption-isotherm, kinetics and Box-Behnken design. Environ Sci Pollut Res 25:30255–30256. https://doi.org/10.1007/s11356-018-3001-3CrossRef

25.

Song Y, Han EH, Dong K, Shan D, Yim CD, You BS (2013) Microstructure and protection characteristics of the naturally formed oxide films on Mg–xZn alloys. Corros Sci 72:133–143. https://doi.org/10.1016/j.corsci.2013.03.021CrossRef

26.

Dutta S, Jana TK, Halder SK, Maiti R, Dutta A, Kumar A, Chatterjee K (2020) Zn₂Al-CO₃ layered double hydroxide: adsorption, cytotoxicity and antibacterial performances. Chemistry Select 5:6162–6171. https://doi.org/10.1002/slct.202001264CrossRef

27.

Marchon B, Carrazza J, Heinemann H, Somorjai GA (1988) TPD and XPS studies of O₂, CO₂, and H₂O adsorption on clean polycrystalline graphite. Carbon 26:507–514. https://doi.org/10.1016/0008-6223(88)90149-2CrossRef

28.

Dorward RC, Bouvier C (1998) A rationalization of factors affecting strength, ductility and toughness of AA6061-type Al-Mg-Si-(Cu) alloys. Mat Sci Eng A 254:33–44. https://doi.org/10.1016/S0921-5093(98)00761-8CrossRef

29.

Zang J, Yu S, Zhu G, Zhou X (2019) Fabrication of superhydrophobic surface on aluminum alloy 6061 by a facile and effective anodic oxidation method. Surf Coat Tech 380:125078. https://doi.org/10.1016/j.surfcoat.2019.125078CrossRef

30.

Arai Y, Ogawa M (2009) Preparation of Co-Al layered double hydroxides by the hydrothermal urea method for controlled particle size. Appl Clay Sci 42:601–604. https://doi.org/10.1016/j.clay.2008.04.011CrossRef

31.

Génin JMR, Bourrié G, Trolard F, Abdelmoula M, Jaffrezic A, Refait P, Maitre V, Humbert B, Herbillon A (1998) Thermodynamic equilibria in aqueous suspensions of synthetic and natural Fe(II)-Fe(III) green rusts: occurrences of the mineral in hydromorphic soils. Environ Sci Technol 32:1058–1068. https://doi.org/10.1021/es970547mCrossRef

32.

Ehsani A, Mahjani MG, Naseri M, Jafarian M (2014) Influence of electrosynthesis conditions and Al₂O₃ nanoparticles on corrosion protection effect of polypyrrole films. Anti-Corros Methods M 61:146–152. https://doi.org/10.1108/ACMM-07-2012-1193CrossRef

33.

Zhang B, Zhu Q, Li Y, Hou B (2018) Facile fluorine-free one step fabrication of superhydrophobic aluminum surface towards self-cleaning and marine anticorrosion. Chem Eng J 352:625–633. https://doi.org/10.1016/j.cej.2018.07.074CrossRef

34.

Cao Y, Zheng D, Li X, Lin J, Wang C, Dong S, Lin C (2018) Enhanced corrosion resistance of superhydrophobic layered double hydroxide (LDH) films with long-term stability on Al substrate. ACS Appl Mater Interfaces 10:15150–15162. https://doi.org/10.1021/acsami.8b02280CrossRef

35.

Yin X, Yu S, Hu J, Li H, Lv Z, Zhou X (2019) Facile fabrication of a durable Ni3S2 nanorod arrays superhydrophobic surface with self-cleaning and degradation properties. J Alloy Compd 791:864–873. https://doi.org/10.1016/j.jallcom.2019.03.367CrossRef

36.

Li H, Yu S (2017) Fabrication and theoretical explanation of the superhydrophobic Cu-Zn coating with dandelion-like CuO microstructure. J Alloy Compd 691:195–205. https://doi.org/10.1016/j.jallcom.2016.08.272CrossRef

37.

Rives V (2002) Characterisation of layered double hydroxides and their decomposition products. Mater Chem Phys 75:19–25. https://doi.org/10.1016/S0254-0584(02)00024-XCrossRef

38.

Zhang B, Duan J, Huang Y, Hou B (2020) Double layered superhydrophobic PDMS-Candle soot coating with durable corrosion resistance and thermal-mechanical robustness. J Mater Sci Technol 71:1–11. https://doi.org/10.1016/j.jmst.2020.09.011CrossRef

39.

Li S, Liu Y, Tian Z, Liu X, Han Z, Ren L (2020) Biomimetic superhydrophobic and antibacterial stainless-steel mesh via double-potentiostatic electrodeposition and modification. Surf Coat Tech 403:126355. https://doi.org/10.1016/j.surfcoat.2020.126355CrossRef

Titel: Facile fabrication and evaluation of self-healing Zn-Al layered double hydroxide superhydrophobic coating on aluminum alloy
verfasst von: Guang Zhu
Yan Zhao
Lin Liu
Liyuan Wang
Jun Wang
Sirong Yu
Publikationsdatum: 21.06.2021
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 26/2021
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-021-06247-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 26/2021

3D characterization of microstructural evolution and variant selection in additively manufactured Ti-6Al-4 V

Ni-Zn supported defective carbon with multi-functional catalytic sites for Baeyer–Villiger reaction using air as oxidant

Structural and luminescent properties of Er3+ and Tb3+-doped sol–gel-based bioactive glass powders and electrospun nanofibers

Extraction of cellulose to progress in cellulosic nanocomposites for their potential applications in supercapacitors and energy storage devices

Effect of Co addition on hardness and electrical conductivity of Cu–Si alloys

Anisotropic transport properties of graphene-based conductor materials

Premium Partner

Marktübersichten