nach oben

Polymer Bulletin

Erschienen in:

03.10.2019 | Original Paper

Fast synthesis of an eco-friendly starch-grafted poly(N,N-dimethyl acrylamide) hydrogel for the removal of Acid Red 8 dye from aqueous solutions

verfasst von: Wagih Abdel-Alim Sadik, Abdel-Ghaffar Maghraby El-Demerdash, Rafik Abbas, Hossam Ahmed Gabre

Erschienen in: Polymer Bulletin | Ausgabe 8/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of this work is to synthesize an eco-friendly, biodegradable, low-cost and efficient hydrogel based on starch-grafted poly(N,N-dimethyl acrylamide). This process can be done by a microwave-assisted method in a heterogenic aqueous solution, and so, the hydrogel is used for the removal of Acid Red 8 (anionic dye) from an aqueous solution using single-batch adsorption technique. The prepared hydrogel has been characterized by FTIR, SEM and TGA. The swelling behavior of hydrogel in both dye and water at different pHs has been studied. The factors which affect the adsorption of Acid Red 8 dye on hydrogel such as pH, percentage of grafting, contact time, hydrogel dose and dye initial concentration have been examined. The obtained results showed that the maximum dye removal percentage (90%) was attained at pH = 1. The percentage of dye removal has improved from 58% after 10 min to 89% after 60 min. Also the percentage of dye removal using hydrogel concentration of 0.3 g l⁻¹ was about 44% which has been improved to 89% on using hydrogel dose up to 2.0 g l⁻¹. The data obtained from the adsorption study were found to fit well with Langmuir adsorption model with maximum adsorption capacity of 120.48 mg g⁻¹. The prepared hydrogel is economic, reusable, efficient and eco-friendly that can be used for the removal of acidic dyes from aqueous media.

Vorheriger Artikel Thermoresponsive cryogels of poly(2-hydroxyethyl methacrylate-co-N-isopropyl acrylamide) (P(HEMA-co-NIPAM)): fabrication, characterization and water sorption study

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Solís M, Solís A, Pérez HI, Manjarrez N, Flores M (2012) Microbial decolouration of azo dyes: a review. Process Biochem 47(12):1723–1748. https://doi.org/10.1016/j.procbio.2012.08.014 CrossRef

Duquette D, Dumont M-J (2019) Comparative studies of chemical crosslinking reactions and applications of bio-based hydrogels. Polym Bull 76(5):2683–2710. https://doi.org/10.1007/s00289-018-2516-6 CrossRef

Mohammad N, Atassi Y, Tally M (2017) Synthesis and swelling behavior of metal-chelating superabsorbent hydrogels based on sodium alginate-g-poly(AMPS-co-AA-co-AM) obtained under microwave irradiation. Polym Bull 74(11):4453–4481. https://doi.org/10.1007/s00289-017-1967-5 CrossRef

Ali I, Asim M, Khan TA (2012) Low cost adsorbents for the removal of organic pollutants from wastewater. J Environ Manage 113:170–183. https://doi.org/10.1016/j.jenvman.2012.08.028 CrossRefPubMed

Pan B, Pan B, Zhang W, Lv L, Zhang Q, Zheng S (2009) Development of polymeric and polymer-based hybrid adsorbents for pollutants removal from waters. Chem Eng J 151(1–3):19–29. https://doi.org/10.1016/j.cej.2009.02.036 CrossRef

Foo KY, Hameed BH (2010) Insights into the modeling of adsorption isotherm systems. Chem Eng J 156(1):2–10. https://doi.org/10.1016/j.cej.2009.09.013 CrossRef

Sandeman SR, Gun’ko VM, Bakalinska OM, Howell CA, Zheng Y, Kartel MT, Phillips GJ, Mikhalovsky SV (2011) Adsorption of anionic and cationic dyes by activated carbons, PVA hydrogels, and PVA/AC composite. J Colloid Interface Sci 358(2):582–592. https://doi.org/10.1016/j.jcis.2011.02.031 CrossRefPubMed

Bhattacharya A (2004) Grafting: a versatile means to modify polymers: Techniques, factors and applications. Prog Polym Sci 29(8):767–814. https://doi.org/10.1016/j.progpolymsci.2004.05.002 CrossRef

Yiğitoğlu M, Aydın G, Işıklan N (2014) Microwave-assisted synthesis of alginate-g-polyvinylpyrrolidone copolymer and its application in controlled drug release. Polym Bull 71(2):385–414. https://doi.org/10.1007/s00289-013-1067-0 CrossRef

10.

Abdel-Halim ES (2013) Preparation of starch/poly(N,N-diethylaminoethyl methacrylate) hydrogel and its use in dye removal from aqueous solutions. React Funct Polym 73(11):1531–1536. https://doi.org/10.1016/j.reactfunctpolym.2013.08.003 CrossRef

11.

Tester RF, Karkalas J, Qi X (2004) Starch—composition, fine structure and architecture. J Cereal Sci 39(2):151–165. https://doi.org/10.1016/j.jcs.2003.12.001 CrossRef

12.

Salam A, Lucia L, Jameel H (2018) Starch derivatives that contribute significantly to the bonding and antibacterial character of recycled fibers. ACS Omega 3(5):5260–5265. https://doi.org/10.1021/acsomega.8b00307 CrossRefPubMedPubMedCentral

13.

Xu Z, Fei Q, Zhang X (2013) Synthesis of the starch grafting of superabsorbent and high oil-absorbing resin. J Environ Sci (China) 25(Suppl 1):S97–S100. https://doi.org/10.1016/S1001-0742(14)60635-5 CrossRef

14.

Nikolic V, Loncarevic B, Popovic A (2019) Biodegradation of copolymer obtained by grafting reaction between methacrylic acid and starch. Polym Bull 76(5):2197–2213. https://doi.org/10.1007/s00289-018-2484-x CrossRef

15.

Çelik M (2006) Preparation and characterization of starch-g-polymethacrylamide copolymers. J Polym Res 13(5):427–432. https://doi.org/10.1007/s10965-006-9063-9 CrossRef

16.

Xu Y, Zhang Y, Feng Q (2013) The dynamic adsorption performance of the cross-linked starch/acrylonitrile graft copolymer for copper ions in water. Colloids Surf A 430:8–12. https://doi.org/10.1016/j.colsurfa.2013.03.064 CrossRef

17.

Witono JR, Noordergraaf IW, Heeres HJ, Janssen LPBM (2017) Rheological behavior of reaction mixtures during the graft copolymerization of cassava starch with acrylic acid. Polym Eng Sci 57(12):1285–1292. https://doi.org/10.1002/pen.24509 CrossRef

18.

Lele VV, Kumari S, Niju H (2018) Syntheses, characterization and applications of graft copolymers of sago starch—a review. Starch Stärke 70(7–8):1700133. https://doi.org/10.1002/star.201700133 CrossRef

19.

Mehrotra R, Rånby B (1977) Graft copolymerization onto starch. I. Complexes of Mn3 as initiators. J Appl Polym Sci 21(6):1647–1654. https://doi.org/10.1002/app.1977.070210621 CrossRef

20.

Meimoun J, Wiatz V, Saint-Loup R, Parcq J, Favrelle A, Bonnet F, Zinck P (2018) Modification of starch by graft copolymerization. Starch Stärke 70(1–2):1600351. https://doi.org/10.1002/star.201600351 CrossRef

21.

Akin A, Isiklan N (2016) Microwave assisted synthesis and characterization of sodium alginate-graft-poly(N,N′-dimethylacrylamide). Int J Biol Macromol 82:530–540. https://doi.org/10.1016/j.ijbiomac.2015.10.050 CrossRefPubMed

22.

Englert C, Schwenke AM, Hoeppener S, Weber C, Schubert US (2016) Microwave-assisted polymer modifications. In: Microwave-assisted polymer synthesis. Springer, pp 209–240. https://doi.org/10.1007/12_2015_347

23.

Kaur L, Gupta G (2017) A review on microwave assisted grafting of polymers. Int J Pharm Sci Res 8:422. https://doi.org/10.13040/ijpsr.0975-8232.8(2).422-26 CrossRef

24.

Kumar D, Pandey J, Raj V, Kumar P (2017) A review on the modification of polysaccharide through graft copolymerization for various potential applications. Open Med Chem J 11:109–126. https://doi.org/10.2174/1874104501711010109 CrossRefPubMedPubMedCentral

25.

Singh V, Kumar P, Sanghi R (2012) Use of microwave irradiation in the grafting modification of the polysaccharides—a review. Prog Polym Sci 37(2):340–364. https://doi.org/10.1016/j.progpolymsci.2011.07.005 CrossRef

26.

Wiesbrock F, Hoogenboom R, Schubert US (2004) Microwave-assisted polymer synthesis: state-of-the-art and future perspectives. Macromol Rapid Commun 25(20):1739–1764. https://doi.org/10.1002/marc.200400313 CrossRef

27.

Cui G, Wang X, Xun J, Lou T (2017) Microwave assisted synthesis and characterization of a ternary flocculant from chitosan, acrylamide and lignin. Int Biodeterior Biodegrad 123:269–275. https://doi.org/10.1016/j.ibiod.2017.07.011 CrossRef

28.

Mittal H, Maity A, Ray SS (2015) Gum ghatti and poly(acrylamide-co-acrylic acid) based biodegradable hydrogel-evaluation of the flocculation and adsorption properties. Polym Degrad Stab 120:42–52. https://doi.org/10.1016/j.polymdegradstab.2015.06.008 CrossRef

29.

Shruthi SB, Bhat C, Bhaskar SP, Preethi G, Sailaja RRN (2016) Microwave assisted synthesis of guar gum grafted acrylic acid/nanoclay superabsorbent composites and its use in crystal violet dye absorption. Green Sustain Chem 06(01):11–25. https://doi.org/10.4236/gsc.2016.61002 CrossRef

30.

Ahuja M, Kumar S, Yadav M (2011) Microwave-assisted synthesis and characterization of polyacrylamide grafted co-polymers of Mimosa mucilage. Polym Bull 66(9):1163–1175. https://doi.org/10.1007/s00289-010-0341-7 CrossRef

31.

Hoogenboom R, Schubert US (2007) Microwave-assisted polymer synthesis: recent developments in a rapidly expanding field of research. Macromol Rapid Commun 28(4):368–386. https://doi.org/10.1002/marc.200600749 CrossRef

32.

Oberti TG, Schiavoni MM, Cortizo MS (2008) Structure and properties of poly(benzyl acrylate) synthesized under microwave energy. Radiat Phys Chem 77(5):597–604. https://doi.org/10.1016/j.radphyschem.2007.09.015 CrossRef

33.

Barleany DR, Dhamar Lestari RS, Yulvianti M, Susanto TR, Shalina Erizal (2017) Acrylic acid neutralization for enhancing the production of grafted chitosan superabsorbent hydrogel. Int J Adv Sci Eng Inf Technol 7(2):702. https://doi.org/10.18517/ijaseit.7.2.2340 CrossRef

34.

Ma J, Zhou G, Chu L, Liu Y, Liu C, Luo S, Wei Y (2016) Efficient removal of heavy metal ions with an EDTA functionalized chitosan/polyacrylamide double network hydrogel. ACS Sustain Chem Eng 5(1):843–851CrossRef

35.

Soleymani M, Akbari A, Mahdavinia GR (2019) Magnetic PVA/laponite RD hydrogel nanocomposites for adsorption of model protein BSA. Polym Bull 76(5):2321–2340. https://doi.org/10.1007/s00289-018-2480-1 CrossRef

36.

Zhou Y, Fu S, Liu H, Yang S, Zhan H (2011) Removal of methylene blue dyes from wastewater using cellulose-based superadsorbent hydrogels. Polym Eng Sci 51(12):2417–2424. https://doi.org/10.1002/pen.22020 CrossRef

37.

Gopi KH, Peera SG, Bhat SD, Sridhar P, Pitchumani S (2014) 3-Methyltrimethylammonium poly(2,6-dimethyl-1,4-phenylene oxide) based anion exchange membrane for alkaline polymer electrolyte fuel cells. Bull Mater Sci 37(4):877–881. https://doi.org/10.1007/s12034-014-0020-7 CrossRef

38.

Larkin P (2011) Chapter 8—illustrated IR and Raman spectra demonstrating important functional groups. In: Larkin P (ed) Infrared and Raman spectroscopy. Elsevier, Oxford, pp 135–176. https://doi.org/10.1016/B978-0-12-386984-5.10008-4 CrossRef

39.

Oladipo AA, Gazi M, Saber-Samandari S (2014) Adsorption of anthraquinone dye onto eco-friendly semi-IPN biocomposite hydrogel: equilibrium isotherms, kinetic studies and optimization. J Taiwan Inst Chem Eng 45(2):653–664. https://doi.org/10.1016/j.jtice.2013.07.013 CrossRef

40.

Aly Z, Graulet A, Scales N, Hanley T (2014) Removal of aluminium from aqueous solutions using PAN-based adsorbents: characterisation, kinetics, equilibrium and thermodynamic studies. Environ Sci Pollut Res 21(5):3972–3986. https://doi.org/10.1007/s11356-013-2305-6 CrossRef

41.

Ho YS, McKay G (1998) A two-stage batch sorption optimized design for dye removal to minimize contact time. Process Saf Environ Prot 76(4):313–318. https://doi.org/10.1205/095758298529678 CrossRef

42.

Qiu H, Lv L, Pan B-c, Zhang Q-j, Zhang W-m, Zhang Q-x (2009) Critical review in adsorption kinetic models. J Zhejiang Univ Sci A 10(5):716–724. https://doi.org/10.1631/jzus.A0820524 CrossRef

43.

Melo BC, Paulino FAA, Cardoso VA, Pereira AGB, Fajardo AR, Rodrigues FHA (2018) Cellulose nanowhiskers improve the methylene blue adsorption capacity of chitosan-g-poly(acrylic acid) hydrogel. Carbohydr Polym 181:358–367. https://doi.org/10.1016/j.carbpol.2017.10.079 CrossRefPubMed

44.

Ho YS, Chiu WT, Wang CC (2005) Regression analysis for the sorption isotherms of basic dyes on sugarcane dust. Bioresour Technol 96(11):1285–1291. https://doi.org/10.1016/j.biortech.2004.10.021 CrossRefPubMed

45.

Kyzas GZ, Bikiaris DN, Mitropoulos AC (2017) Chitosan adsorbents for dye removal: a review. Polym Int 66(12):1800–1811. https://doi.org/10.1002/pi.5467 CrossRef

46.

Desta MB (2013) Batch sorption experiments: Langmuir and Freundlich isotherm studies for the adsorption of textile metal ions onto teff straw (Eragrostis tef) agricultural waste. J Thermodyn 2013:1–6. https://doi.org/10.1155/2013/375830 CrossRef

47.

Xu S, Wang J, Wu R, Wang J, Li H (2006) Adsorption behaviors of acid and basic dyes on crosslinked amphoteric starch. Chem Eng J 117(2):161–167. https://doi.org/10.1016/j.cej.2005.12.012 CrossRef

Titel: Fast synthesis of an eco-friendly starch-grafted poly(N,N-dimethyl acrylamide) hydrogel for the removal of Acid Red 8 dye from aqueous solutions
verfasst von: Wagih Abdel-Alim Sadik
Abdel-Ghaffar Maghraby El-Demerdash
Rafik Abbas
Hossam Ahmed Gabre
Publikationsdatum: 03.10.2019
Verlag: Springer Berlin Heidelberg
Erschienen in: Polymer Bulletin / Ausgabe 8/2020
Print ISSN: 0170-0839
Elektronische ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-019-02958-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2020

Thienoisoindigo-based donor–acceptor random copolymers: synthesis, characterization, and thin film nanostructure study

Thermoresponsive cryogels of poly(2-hydroxyethyl methacrylate-co-N-isopropyl acrylamide) (P(HEMA-co-NIPAM)): fabrication, characterization and water sorption study

Sway of MnO2 with poly(acrylonitrile) in the sulfur-based electrode for lithium–sulfur batteries

Effects of temperature on rice husk silica ash additive for fouling mitigation by polysulfone–RHS ash mixed-matrix composite membranes

Electrical investigation on thiophene–indole conducting copolymers as-synthesized through in situ chemical copolymerization route

Effects of phosphorus-containing aromatic polyamide and organo-modified hydroxyapatite nanoparticles on the thermal, combustion and mechanical properties of polyvinyl chloride

Premium Partner

Marktübersichten