nach oben

Physics of Metals and Metallography

Erschienen in:

01.02.2024 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Features of Decomposition and the Mechanical Properties of an Aging Shape Memory Ti₄₉Ni₅₁ Alloy Subjected to Heat Treatment

verfasst von: N. N. Kuranova, V. V. Makarov, V. G. Pushin

Erschienen in: Physics of Metals and Metallography | Ausgabe 2/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Features of the microstructure of the shape-memory Ti–51 at %Ni alloy subjected to aging at different temperatures are studied. Along with metallographic analysis performed by optical and electron microscopy and X-ray diffraction analysis, room-temperature tensile tests of the mechanical properties are performed. The alloy in the aged state is found to be characterized by the high level of mechanical properties (the ultimate strength is up to 1200 MPa and the relative elongation, 35%) owing to the highly dispersed homogeneous decomposition and the simultaneous strengthening and increase in the plasticity as a result of strain-induced martensitic transformation.

Vorheriger Artikel Capillary Phenomena during Interaction of Copper Melt with Dense and Porous MAX Phases with General Formula (Cr,Mn)2AlC

Nächster Artikel Relaxation of the Excess Free Volume of the Phase Transformation at the Phase Interface between the Crystal and the Melt

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

K. Ootsuka, K. Simidzu, Yu. Sudzuki, Yu. Sekiguti, Ts. Tadaki, T. Khomma, and S. Miyadzaki, Alloys with Shape Memory Effect (Hiroyasu Funakubo, 1984; Metallurgiya, Moscow, 1990).

Engineering Aspects of Shape Memory Alloys, Ed. by T. W. Duering, K. L. Melton, D. Stockel, and C. M. Wayman (London, Butterworth-Heineman, 1990).

V. N. Khachin, V. G. Pushin, and V. V. Kondrat’ev, Titanium Nickelide: Structure and Properties (Nauka, Moscow, 1992).

V. G. Pushin, N. N. Kuranova, and A. V. Pushin, “Structure and mechanical properties of shape-memory alloys of the Ti–Ni–Cu system,” Met. Sci. Heat Treat. 57, 739–745 (2016). https://doi.org/10.1007/s11041-016-9951-5CrossRef

V. Brailovski, I. Yu. Khmelevskaya, S. D. Prokoshkin, V. G. Pushin, E. P. Ryklina, and R. Z. Valiev, “Foundation of heat and thermomechanical treatments and their on the structure and properties of titanium nickelide-based alloys,” Phys. Met. Metallogr. 97, S3–S55 (2004).

A. I. Razov, “Application of titanium nickelide-based alloys in engineering,” Phys. Met. Metallogr. 97, S97–S126 (2004).

E. Bonnot, R. Romero, L. Mañosa, E. Vives, and A. Planes, “Elastocaloric effect associated with the martensitic transition in shape-memory alloys,” Phys. Rev. Lett. 100, 125901 (2008). https://doi.org/10.1103/physrevlett.100.125901CrossRefPubMed

J. Cui, “Shape memory alloys and their applications in power generation and refrigeration,” in Mesoscopic Phenomena in Multifunctional Materials, Ed. by A. Saxena and A. Planes, Springer Series in Materials Science, Vol. 198 (Springer, Berlin, 2014), pp. 289–307. https://doi.org/10.1007/978-3-642-55375-2_12

S. D. Prokoshkin, V. G. Pushin, E. P. Ryklina, and I. Yu. Khmelevskaya, “Application of titanium nickelide-based alloys in medicine,” Phys. Met. Metallogr. 97, S56–S96 (2004).

10.

J. C. Wilson and M. J. Wesolowsky, “Shape memory alloys for seismic response modification: A state-of-the-art review,” Earthquake Spectra 21, 569–601 (2005). https://doi.org/10.1193/1.1897384CrossRef

11.

Shape Memory Alloys for Biomedical Applications, Ed. by T. Yoneyama and S. Miyazaki (Woodhead, Cambridge, 2009). https://doi.org/10.1533/9781845695248CrossRef

12.

J. Dong, C. S. Cai, and A. M. Okeil, “Overview of potential and existing applications of shape memory alloys in bridges,” J. Bridge Eng. 16, 305–315 (2011). https://doi.org/10.1061/(asce)be.1943-5592.0000145CrossRef

13.

V. Pushin, N. Kuranova, E. Marchenkova, and A. Pushin, “Design and development of Ti–Ni, Ni–Mn–Ga and Cu–Al–Ni-based alloys with high and low temperature shape memory effects,” Materials 12, 2616 (2019). https://doi.org/10.3390/ma12162616CrossRefPubMedPubMedCentral

14.

N. N. Kuranova, V. V. Makarov, V. G. Pushin, and Yu. M. Ustyugov, “Influence of heat treatment and deformation on the structure, phase transformation, and mechanical behavior of bulk TiNi-based alloys,” Metals 12, 2188 (2022). https://doi.org/10.3390/met12122188CrossRef

15.

V. G. Pushin, S. D. Prokoshkin, R. Z. Valiev, V. Brailovskii, E. Z. Valiev, A. E. Volkov, A. M. Glezer, S. V. Dobatkin, V. F. Dudarev, Yu. T. Zhu, Yu. G. Zainulin, Yu. R. Kolobov, V. V. Kondrat’ev, A. V. Korolev, A. I. Korshunov, N. I. Kourov, N. V. Kudrevatykh, A. I. Lotkov, L. L. Meisner, A. A. Popov, N. N. Popov, A. I. Razov, M. A. Khusainov, Yu. I. Chumlyakov, S. V. Andreev, A. A. Baturin, S. P. Belyaev, V. N. Grishkov, D. V. Gunderov, A. P. Dyupin, K. V. Ivanov, V. I. Itin, M. K. Kasymov, O. A. Kashin, I. V. Kireeva, A. I. Kozlov, T. E. Kuntsevich, N. N. Kuranova, N. Yu. Pushina, E. P. Ryklina, A. N. Uksusnikov, I. Yu. Khmelevskaya, A. V. Shelyakov, V. Ya. Shklover, E. V. Shorokhov, and L. I. Yurchenko, Titanium Nickelide Shape-Memory Alloys, Part 1: Structure, Phase Transformations, and Properties (Ural. Otd. Ross. Akad. Nauk, Ekaterinburg, 2006).

16.

N. N. Kuranova, V. V. Makarov, and V. G. Pushin, “The effect of thermomechanical treatment on the structure and mechanical properties of the Ti_49.5Ni_50.5 shape-memory alloy,” Phys. Met. Metallogr. 123, 996–1003 (2022). https://doi.org/10.1134/S0031918X22600993CrossRef

17.

N. N. Kuranova, V. V. Makarov, V. G. Pushin, and N. A. Popov, “The structure and mechanical properties of the aging shape-memory Ti₄₉Ni₅₁ alloy after thermomechanical treatment,” Phys. Met. Metallogr. 124, 230–237 (2023). https://doi.org/10.1134/s0031918x23700126CrossRef

18.

N. M. Matveeva, V. G. Pushin, S. B. Volkova, A. V. Shelyakov, Yu. A. Bykovskii, and V. S. Kraposhin, “Effect of the conditions of crystallization of amorphous TiNi–TiCu alloys on their structure and shape memory,” Phys. Met. Metallogr. 83, 626–632 (1997).

19.

S. Miyazaki and A. Ishida, “Martensitic transformation and shape memory behavior in sputter-deposited TiNi-base thin films,” Mater. Sci. Eng., A 273–275, 106–133 (1999). https://doi.org/10.1016/s0921-5093(99)00292-0CrossRef

20.

Yo. Fu, H. Du, W. Huang, S. Zhang, and M. Hu, “TiNi-based thin films in MEMS applications: A review,” Sens. Actuators A: Phys. 112, 395–408 (2004). https://doi.org/10.1016/j.sna.2004.02.019CrossRef

21.

A. V. Pushin, A. A. Popov, and V. G. Pushin, “Effect of the deviation of the chemical composition from the stoichiometric composition on the structural and phase transformations and properties of rapidly quenched Ti_50 + xNi_25 − xCu₂₅ alloys,” Phys. Met. Metallogr. 113, 283–294 (2012). https://doi.org/10.1134/s0031918x12030131CrossRef

22.

V. G. Pushin, V. V. Stolyarov, R. Z. Valiev, N. I. Kourov, N. N. Kuranova, E. A. Prokofiev, and L. I. Yurchenko, “Features of structure and phase transformations in shape memory TiNi-based alloys after severe plastic deformation,” Ann. de Chim. Sci. des Mater. 27 (3), 77–88 (2002). https://www.sciencedirect.com/science/article/pii/S0151910702800095.

23.

V. G. Pushin, R. Z. Valiev, Yu. T. Zhu, D. V. Gunderov, N. I. Kourov, T. E. Kuntsevich, A. N. Uksusnikov, and L. I. Yurchenko, “Effect of severe plastic deformation on the behavior of Ti–Ni shape memory alloys,” Mater. Trans. 47, 694–697 (2006). https://doi.org/10.2320/matertrans.47.694CrossRef

24.

R. Valiev, D. Gunderov, E. Prokofiev, V. Pushin, and Yu. Zhu, “Nanostructuring of TiNi alloy by SPD processing for advanced properties,” Mater. Trans. 49, 97–101 (2008). https://doi.org/10.2320/matertrans.me200722CrossRef

25.

N. N. Kuranova, D. V. Gunderov, A. N. Uksusnikov, A. V. Luk’Yanov, L. I. Yurchenko, E. A. Prokof’ev, V. G. Pushin, and R. Z. Valiev, “Effect of heat treatment on the structural and phase transformations and mechanical properties of TiNi alloy subjected to severe plastic deformation by torsion,” Phys. Met. Metallogr. 108, 556–568 (2009). https://doi.org/10.1134/S0031918X09120060CrossRef

26.

X. Ren, N. Miura, J. Zhang, K. Otsuka, K. Tanaka, M. Koiwa, T. Suzuki, Yu. I. Chumlyakov, and M. Asai, “A comparative study of elastic constants of Ti–Ni-based alloys prior to martensitic transformation,” Mater. Sci. Eng., A 312, 196–206 (2001). https://doi.org/10.1016/s0921-5093(00)01876-1CrossRef

27.

V. A. Lobodyuk, Yu. N. Koval’, and V. G. Pushin, “Crystal-structural features of pretransition phenomena and thermoelastic martensitic transformations in alloys of nonferrous metals,” Phys. Met. Metallogr. 111, 165–189 (2011). https://doi.org/10.1134/s0031918x11010212CrossRef

28.

S. Sarkar, X. Ren, and K. Otsuka, “Evidence for strain glass in the ferroelastic-martensitic system Ti_50 – xNi_50 + x,” Phys. Rev. Lett. 95, 205702 (2005). https://doi.org/10.1103/physrevlett.95.205702CrossRefPubMed

29.

Yo. M. Jin, Yu. U. Wang, and Ya. Y. Ren, “Theory and experimental evidence of phonon domains and their roles in pre-martensitic phenomena,” npj Comput. Mater. 1, 15002 (2015). https://doi.org/10.1038/npjcompumats.2015.2

30.

Y. Wang and Y. M. Jin, “Martensitic transformation precursors: phonon theory and critical experiments,” in Proc. Int. Conf. Solid-Solid Phase Transformations in Inorganic Materials (2015), pp. 467–474. https://doi.org/10.48550/arXiv.1503.00027

31.

W. Ko, S. B. Maisel, B. Grabowski, J. B. Jeon, and J. Neugebauer, “Atomic scale processes of phase transformations in nanocrystalline NiTi shape-memory alloys,” Acta Mater. 123, 90–101 (2017). https://doi.org/10.1016/j.actamat.2016.10.019CrossRef

32.

Z. Deng, Q. Li, Yu. Onuki, and Q. Sun, “Multifunctional nanostructured NiTi alloy with Invar, Elinvar and Rinvar properties,” J. Alloys Compd. 909, 164682 (2022). https://doi.org/10.1016/j.jallcom.2022.164682CrossRef

33.

K. Xu, J. Luo, C. Li, Yu. Shen, C. Li, X. Ma, and M. Li, “Mechanisms of stress-induced martensitic transformation and transformation-induced plasticity in NiTi shape memory alloy related to superelastic stability,” Scr. Mater. 217, 114775 (2022). https://doi.org/10.1016/j.scriptamat.2022.114775CrossRef

Titel: Features of Decomposition and the Mechanical Properties of an Aging Shape Memory Ti49Ni51 Alloy Subjected to Heat Treatment
verfasst von: N. N. Kuranova
V. V. Makarov
V. G. Pushin
Publikationsdatum: 01.02.2024
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 2/2024
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X23602809

The Features of the Phase Composition and Structure of a Rapidly Quenched Ferromagnetic Mn–Al–Ga Alloy

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Initiation of the Shape Memory Effect by Fast Neutron Irradiation

STRENGTH AND PLASTICITY

Peculiarities of Magnetization Processes of Cobalt-Based Amorphous Alloy Ribbons in the As-Quenched State

ELECTRICAL AND MAGNETIC PROPERTIES

Relaxation of the Excess Free Volume of the Phase Transformation at the Phase Interface between the Crystal and the Melt

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Studying the Effect of Small Additives of Sc and Zr on the Microstructure of Al–Mg–Si Alloy with Excess Silicon during Multi-Step Heat Treatment

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Morphology of Dissipative Structures Formed during the High-Temperature Synthesis of MgB2 Compound

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

The Features of the Phase Composition and Structure of a Rapidly Quenched Ferromagnetic Mn–Al–Ga Alloy

Initiation of the Shape Memory Effect by Fast Neutron Irradiation

Peculiarities of Magnetization Processes of Cobalt-Based Amorphous Alloy Ribbons in the As-Quenched State

Relaxation of the Excess Free Volume of the Phase Transformation at the Phase Interface between the Crystal and the Melt

Studying the Effect of Small Additives of Sc and Zr on the Microstructure of Al–Mg–Si Alloy with Excess Silicon during Multi-Step Heat Treatment

Morphology of Dissipative Structures Formed during the High-Temperature Synthesis of MgB2 Compound