Skip to main content
Erschienen in: Metallurgist 9-10/2020

21.01.2020

Features of the Effect of Microstructure Characteristics on Corrosion Resistance of Cold-Rolled High-Strength Low-Alloy Steels (HSLA) Grade 260–300 for Automobile Building

Erschienen in: Metallurgist | Ausgabe 9-10/2020

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

An experimental study is conducted on the effect of production parameters on the corrosion resistance of cold-rolled high-strength low-alloy steels (HSLA) grade 260–300, treated in continuous annealing lines (CAL). It is been shown that corrosion resistance is mainly determined by development of ageing in overageing sections and during subsequent cooling. A reduction in strip movement and an increase of overageing temperature leads to more complete development of this process. A tendency towards ageing is also affected by hot rolling parameters, i.e., the end of rolling temperature in the roughing group of stands T6, correlating with an increase reheating temperature, and finishing rolling temperature Ter . The favorable effect of the T6 increase is probably connected with more complete dissolution of manganese sulfide during heating and formation of a larger number of submicron precipitates of manganese sulfide during rolling, which are a substrate for precipitation of aluminum nitride and cementite on their surface. With a reduction in finishing rolling temperature Ter , the end of aluminum nitride precipitation is more complete. These factors cause a reduction in nitrogen and carbon concentration ferrite and, consequently the tendency towards aging.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat I. G. Rodionova, É. T. Shapovalov, M. E. Kovalevskaya, O. M. Baklanova, et al., “Increase in atmospheric corrosion resistance of automobile sheet steels by optimizing chemical composition and manufacturing parameters,” Metallurg., No. 8, 46–52 (2005). I. G. Rodionova, É. T. Shapovalov, M. E. Kovalevskaya, O. M. Baklanova, et al., “Increase in atmospheric corrosion resistance of automobile sheet steels by optimizing chemical composition and manufacturing parameters,” Metallurg., No. 8, 46–52 (2005).
2.
Zurück zum Zitat Standard ASTM G 44-80. Alternate Immersion Stress Corrosion Testing in 3.5% Sodium Chloride Solution. Standard ASTM G 44-80. Alternate Immersion Stress Corrosion Testing in 3.5% Sodium Chloride Solution.
3.
Zurück zum Zitat É. T. Shapovalov, I. G. Rodionova, A. I. Zaitsev, M. E. Kovalevskaya, O. N. Baklanova, et al., “Factors governing corrosion resistance and other user properties of cold-rolled product,” Probl. Chern. Met. Mater., No. 3, 68–76 (2009). É. T. Shapovalov, I. G. Rodionova, A. I. Zaitsev, M. E. Kovalevskaya, O. N. Baklanova, et al., “Factors governing corrosion resistance and other user properties of cold-rolled product,” Probl. Chern. Met. Mater., No. 3, 68–76 (2009).
4.
Zurück zum Zitat I. G. Rodionova, O. N. Baklanova, A. I. Zaitsev, M. E. Marzoeva, et al., “Stucy of factors controlling corrosion resistance of microalloyed automobile sheet steels,” Probl. Chern. Met. Mater., No. 2, 45–55 (2010). I. G. Rodionova, O. N. Baklanova, A. I. Zaitsev, M. E. Marzoeva, et al., “Stucy of factors controlling corrosion resistance of microalloyed automobile sheet steels,” Probl. Chern. Met. Mater., No. 2, 45–55 (2010).
5.
Zurück zum Zitat A. V. Amezhnov, I. G. Rodionova, A. I. Zaitsev, E. I. Zarkova, and M. E. Marzoeva, “Features of the effect of nonmetallic inclusions, phase precipitates on corrosion resistance of low-carbon and ultralow-carbon steels,” Probl. Chern. Met. Mater., No. 1, 58–69 (2019). A. V. Amezhnov, I. G. Rodionova, A. I. Zaitsev, E. I. Zarkova, and M. E. Marzoeva, “Features of the effect of nonmetallic inclusions, phase precipitates on corrosion resistance of low-carbon and ultralow-carbon steels,” Probl. Chern. Met. Mater., No. 1, 58–69 (2019).
6.
Zurück zum Zitat I. G. Rodionova, N. A. Karamysheva, A. A. Pavlov, A. S. Mel’nichenko, V. E. Telegin, et al., “Study of the effect of chemical composition and production parameters on the properties of cold-rolled product of low-alloy steel (type HSLA) after continuous annealing using statistical analysis methods,” Probl. Chern. Met. Mater., No. 1, 79–91 (2019). I. G. Rodionova, N. A. Karamysheva, A. A. Pavlov, A. S. Mel’nichenko, V. E. Telegin, et al., “Study of the effect of chemical composition and production parameters on the properties of cold-rolled product of low-alloy steel (type HSLA) after continuous annealing using statistical analysis methods,” Probl. Chern. Met. Mater., No. 1, 79–91 (2019).
7.
Zurück zum Zitat N. P. Zhuk, Course in Corrosion and Metal Protection [in Russian], Metallurgiya, Moscow 91968). N. P. Zhuk, Course in Corrosion and Metal Protection [in Russian], Metallurgiya, Moscow 91968).
8.
Zurück zum Zitat I. G. Rodionova, N. G. Shaposhnikov, N. I. Éndel’, B. M. Mogutnov, S. V. Zhilenko, et al., “Conditions for forming nitride and sulfide phases in steels for deep drawing. II. Manganese sulfide,” Probl. Chern. Met. Mater., No. 4, 52–58 (2008). I. G. Rodionova, N. G. Shaposhnikov, N. I. Éndel’, B. M. Mogutnov, S. V. Zhilenko, et al., “Conditions for forming nitride and sulfide phases in steels for deep drawing. II. Manganese sulfide,” Probl. Chern. Met. Mater., No. 4, 52–58 (2008).
9.
Zurück zum Zitat I. G. Rodionova, I. N. Chirkina, T. M. Efimova, N. V. Skomorokhova, et al., “Materials science aspects of improving a set of properties for cold-rolled automobile rolled product in microalloyed steels,” Probl. Chern. Met. Mater., No. 1, 85–92 (2011). I. G. Rodionova, I. N. Chirkina, T. M. Efimova, N. V. Skomorokhova, et al., “Materials science aspects of improving a set of properties for cold-rolled automobile rolled product in microalloyed steels,” Probl. Chern. Met. Mater., No. 1, 85–92 (2011).
10.
Zurück zum Zitat Yu. S. Gladchenkova, D. L. D’yakonov, I. G. Rodionova, N. G. Shaposhnikova, et al., “Conditions of forming combined precipitates and their effect on cold-rolled product properties of low-carbon steels,” Metallurg., No. 9, 43–48 (2016). Yu. S. Gladchenkova, D. L. D’yakonov, I. G. Rodionova, N. G. Shaposhnikova, et al., “Conditions of forming combined precipitates and their effect on cold-rolled product properties of low-carbon steels,” Metallurg., No. 9, 43–48 (2016).
11.
Zurück zum Zitat C. W. Siyasiya and W. E. Stumpf, “The influence of the Sulphur content on the static recrystallization of cold worked low carbon aluminium-killed strip steels,” Mater. Sci. Eng. A,A494, 188–195 (2008).CrossRef C. W. Siyasiya and W. E. Stumpf, “The influence of the Sulphur content on the static recrystallization of cold worked low carbon aluminium-killed strip steels,” Mater. Sci. Eng. A,A494, 188–195 (2008).CrossRef
12.
Zurück zum Zitat H. Katoh, H. Takechi, N. Takahashi, and M. Abe, “Cold-rolled steel sheets produced by continuous annealing,” in: R. Pradhan (editor), Technology of Continuously Annealed Cold-Rolled Sheet Stee, Proceedings of a symposium sponsored by the Heat Treatment and Ferrous Metallurgy Committees of The Metallurgical Society of AIME and held at the TMS-AIME Fall Meeting in Detroit, Michigan, September 17–18 (1984). H. Katoh, H. Takechi, N. Takahashi, and M. Abe, “Cold-rolled steel sheets produced by continuous annealing,” in: R. Pradhan (editor), Technology of Continuously Annealed Cold-Rolled Sheet Stee, Proceedings of a symposium sponsored by the Heat Treatment and Ferrous Metallurgy Committees of The Metallurgical Society of AIME and held at the TMS-AIME Fall Meeting in Detroit, Michigan, September 17–18 (1984).
13.
Zurück zum Zitat N. G. Shaposhnikov, B. M. Mogutnov, S. M. Polonskaya, A. P. Kolesnichenko, and P. B. Belyavskii, “Thermodynamic modeling as a tool for improving technology of ingot heating of steel 12Kh18N10T for rolling,” Materialoved, No. 11, 2–9 (2014). N. G. Shaposhnikov, B. M. Mogutnov, S. M. Polonskaya, A. P. Kolesnichenko, and P. B. Belyavskii, “Thermodynamic modeling as a tool for improving technology of ingot heating of steel 12Kh18N10T for rolling,” Materialoved, No. 11, 2–9 (2014).
14.
Zurück zum Zitat N. G. Shaposhnikov, I. G. Rodionova, and A. A. Pavlov, “Thermodynamic construction of corrosion-resistant steels of the austenite-martensite class intended as a bimetal cladding layer,” Metallurg., No. 12, 45–50 (2015). N. G. Shaposhnikov, I. G. Rodionova, and A. A. Pavlov, “Thermodynamic construction of corrosion-resistant steels of the austenite-martensite class intended as a bimetal cladding layer,” Metallurg., No. 12, 45–50 (2015).
15.
Zurück zum Zitat S. S. Guseva, V. O. Gurenko, and Yu. D. Zvarkovskii, Continuous Heats Treatment of Automobile Sheet Steel [in Russian], Metallurgiya, (1979). S. S. Guseva, V. O. Gurenko, and Yu. D. Zvarkovskii, Continuous Heats Treatment of Automobile Sheet Steel [in Russian], Metallurgiya, (1979).
16.
Zurück zum Zitat H. Hideo Abe and S. Satoh, “Progress of Continuous Annealing Technology for Cold-Rolled Sheet Steels and Associated Product Development,” Kawasaki Steel Technical Report, No. 22, 48–56 (1990). H. Hideo Abe and S. Satoh, “Progress of Continuous Annealing Technology for Cold-Rolled Sheet Steels and Associated Product Development,” Kawasaki Steel Technical Report, No. 22, 48–56 (1990).
17.
Zurück zum Zitat V. K. Babich, Yu. P. Gul’, and I. E. Dolzhenkov, Steel Strain Hardening [in Russian], Metallurgiya, Moscow (1972). V. K. Babich, Yu. P. Gul’, and I. E. Dolzhenkov, Steel Strain Hardening [in Russian], Metallurgiya, Moscow (1972).
Metadaten
Titel
Features of the Effect of Microstructure Characteristics on Corrosion Resistance of Cold-Rolled High-Strength Low-Alloy Steels (HSLA) Grade 260–300 for Automobile Building
Publikationsdatum
21.01.2020
Erschienen in
Metallurgist / Ausgabe 9-10/2020
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-020-00910-3

Weitere Artikel der Ausgabe 9-10/2020

Metallurgist 9-10/2020 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.