nach oben

Erschienen in:

2025 | OriginalPaper | Buchkapitel

5. Fertigungsplanung für die additive Fertigung von metallischen Teilen

verfasst von : Rezo Aliyev

Erschienen in: Planung von additiven Fertigungsprozessen

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Zusammenfassung

Ein Schwerpunkt des Buches liegt auf der additiven Fertigung metallischer Bauteile. In diesem Kapitel werden zunächst die verfahrensspezifischen Grundlagen der einzelnen Prozessschritte entlang der Prozesskette dargestellt. Diese bilden die Basis für eine wirtschaftliche Fertigung. Die Auswahl einer wirtschaftlichen Prozesskette erfolgt anhand von Kostenvergleichen zwischen alternativen Prozessvarianten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel CAD- Datengenerierung für die additive Fertigung

Nächstes Kapitel Fertigungsplanung für die additive Fertigung von nichtmetallischen Teilen

[ANST20]

Anstätt C (2020) Multimaterialverarbeitung mittels Laserstrahlschmelzen am Beispiel von metallischen Verbindungen mit der Kupferlegierung CW106C. Dissertation TU München

[ABOU14]

Aboulkhair NT, Everitt NM, Ashcroft I, Tuck C (2014) Reducing porosity in AlSi10Mg parts processed by selective laser melting. Addit Manuf 1–4:77–86. https://doi.org/10.1016/j.addma.2014.08.001

[ADAM15]

Adam, Guido AO (2015) Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling. Dissertation, Universitet Paderborn. Shaker, Aachen

[BAJA20]

Bajaj P, Hariharan A, Kini A, Kürnsteiner P, Raabe D, Jägle EA (2020) Steels in additive manufacturing: A review of their microstructure and properties. Journal Materials Science and Engineering: A 772:138633. https://doi.org/10.1016/j.msea.2019.138633

[BARE22]

Bareth T, Binder M, Kindermann P, Stapff V, Rieser A, Seidel C (2022) Implementation of a multi-material mechanism in a laser-based powder bed fusion (PBF-LB) machine. Procedia CIRP 107:558–563. https://doi.org/10.1016/j.procir.2022.05.025

[BARG18]

Bargel HJ, Schulze G (2018) Werkstoffkunde: Mit 85 Tabellen, 12. Aufl. Springer, Berlin. https://doi.org/10.1007/978-3-662-48629-0

[BAYA19]

Bayat M, Thanki A, Mohanty S, Witvrouw A, Yang S, Thorborg J, Tiedje NS, Hattel JH (2019) Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation. Addit Manuf 30:100835. https://doi.org/10.1016/j.addma.2019.100835

[BEND21]

Bender B, Gericke K (2021) Konstruktionslehre. Methoden und Anwendung erfolgreicher Produktentwicklung. Springer Nature. https://doi.org/10.1007/978-3-662-57303-7

[BUCH19]

Buchanan C, Gardner L (2019) Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges. Eng Struct 180:332–348. https://doi.org/10.1016/j.engstruct.2018.11.045

[CALI14]

Calignano F (2014) Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting. Mater Des 64:203–213. https://doi.org/10.1016/j.matdes.2014.07.043

[CARL16]

Carlton HD, Haboub A, Gallegos GF, Parkinson DY (2016) Damage evolution and failure mechanisms in additively manufactured stainless steel. Mater Sci Eng, A 651:406–414. https://doi.org/10.1016/j.msea.2015.10.073

[CHAT21]

Chaturvedi M, Scutelnicu E, Rusu CC, Mistodie LR, Mihailescu D, Subbiah AV (2021) Wire Arc Additive Manufacturing: Review on Recent Findings and Challenges in Industrial Applications and Materials Characterization. Metals 11:939. https://doi.org/10.3390/met11060939

[CHEN16]

Chen H, Zhao YF (2016) Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process. Rapid Prototyping Journal 22(3):527–538. https://doi.org/10.1108/RPJ-11-2014-0149

[CHEN21]

Chen X, Kong F, Fu Y et al (2021) A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model. Int J Adv Manuf Technol 117:707–727. https://doi.org/10.1007/s00170-021-07807-8

[CASA16]

Casati R, Lemke JN, Tuissi A, Vedani M (2016) Aging Behaviour and Mechanical Performance of 18-Ni 300 Steel Processed by Selective Laser Melting. Metals 6(9):218. https://doi.org/10.3390/met6090218

[COSM20]

Cosma C, Kessler J, Gebhardt A, Campbell I (2020) Balc N (2020) Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed. Materials 13:905. https://doi.org/10.3390/ma13040905

[COST17]

Costabile G, Fera M, Fruggiero F, Lambiase A, Pham D (2017) Cost models of additive manufacturing: A literature review. Int J Ind Eng Comput 8:263–283. https://doi.org/10.5267/j.ijiec.2016.9.001

[CUNN17]

Cunningham CR, Wikshåland S, Xu F, Kemakolam N, Shokrani A, Dhokia V, Newman ST (2017) Cost modelling and sensitivity analysis of wire and arc additive manufacturing. Procedia Manufacturing 11:650–657. https://doi.org/10.1016/j.promfg.2017.07.163

[CUNN19]

Cunningham R, Zhao C, Parab N, Kantzos C, Pauza J, Fezzaa K, Sun T, Rollett AD (2019) Keyhole threshold and morphology in laser melting revealed ultrahigh-speed x-ray imaging. Science (New York, N.Y.) 363 (6429): 849–852. https://https://doi.org/10.1126/science.aav4687

[DADK21]

Dadkhah M, Mosallanejad MH, Iuliano L et al (2021) A Comprehensive Overview on the Latest Progress in the Additive Manufacturing of Metal Matrix Composites: Potential, Challenges, and Feasible Solutions. Acta Metall Sin 34:1173–1200. https://doi.org/10.1007/s40195-021-01249-7

[DANC02]

Dance BG (2002) Electron beam texturing. Cambridge, United Kingdom: The Welding Institute. Progress Report 751

[DESK22]

DeskopMetall System S. 50. Online: https://www.desktopmetal.com/resources/introduction-to-p-50-2. Zugegriffen: 14. Juli 2024

[DICK92]

Dickens PM, Pridham, MS, Cobb RS., Gibson I, Dixon G (1992) Rapid Pro-totyping Using 3-D Welding. In: International Solid Freeform Fabrication Symposium, Proceedings of the 3rd Symposium on Solid Freeform Fabrication, S. 280–290

[DIEG19]

Diegel O, Nordin A, Motte D (2019) A Practical Guide to Design for Additive Manufacturing. Springer Nature, Singapore. https://doi.org/10.1007/978-981-13-8281-9

[DIMO23]

Dimopoulos A, Salimi M, Gan T-H (2023) Chatzakos P (2023) Support Structures Optimisation for High-Quality Metal Additive Manufacturing with Laser Powder Bed Fusion: A Numerical Simulation Study. Materials 16(22):7164. https://doi.org/10.3390/ma16227164

[DING15]

Ding D, Pan Z, Cuiuri D, Li H (2015) Wire-feed additive manufacturing of metal components: technologies, developments and future interests. The International Journal of Advanced Manufacturing Technology 81(1–4):465–481. https://doi.org/10.1007/s00170-015-7077-3

[DONG17]

Dong B, Pan Z, Shen C et al (2017) Fabrication of Copper-Rich Cu-Al Alloy Using the Wire-Arc Additive Manufacturing Process. Metal Mater Trans B 48:3143–3151. https://doi.org/10.1007/s11663-017-1071-0

[DUPR20]

Du Plessisab A, Macdonaldc E (2020) Hot isostatic pressing in metal additive manufacturing: X-ray tomography reveals details of pore closure. Addit Manuf 34:101191. https://doi.org/10.1016/j.addma.2020.101191

[EOS22]

Titan: 3D-Druck mit EOS Titanium Ti64, Ti64ELI und TiCP. Online: https://www.eos.info/de-de/metall-loesungen/metall-materialien/titan. Zugegriffen: 17. Juli 2024

[FAHR14]

Fahrenwaldt HJ, Schuler V, Twrdek J (2014) Praxiswissen Schweißtechnik Werkstoffe, Prozesse, Fertigung. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-03141-1

[FENG18]

Feng Z, Yanga Y, Xua Z, Shia Q (2018) Effect of Martensitic Transformation on Elastic Modulus Anisotropy of Ti-6Al-4V Alloy. Mater Res 21(4):e20180197. https://doi.org/10.1590/1980-5373-MR-2018-0197

[FINF18]

Finfrock CB, Exil A, Carroll JD, Deibler L (2018) Effect of Hot Isostatic Pressing and Powder Feedstock on Porosity, Microstructure, and Mechanical Properties of Selective Laser Melted AlSi10Mg. Metallography, Microstructure, and Analysis 7(4):443–456. https://doi.org/10.1007/s13632-018-0456-z

[FRYK16]

Frykholm R, Takeda Y, Andersson BG, Carlström R (2016) Solid state sintered 3-D printing component by using inkjet (binder) method. Journal of the Japan Society of Powder and Powder Metallurgy 63(7):421–426. https://doi.org/10.2497/jjspm.63.421

[GAN16]

Gan X, Wong CH (2016) Practical support structures for selective laser melting. J Mater Process Technol 238:474–484. https://doi.org/10.1016/j.jmatprotec.2016.08.006

[GE24]

X Line 200R Maschine. Online: https://www.colibriumadditive.com/printers/l-pbf-printers/x-line-2000r. Zugegriffen: 14. Juli 2024

[GEBH16]

Gebhardt A (2016) Additive Fertigungsverfahren Additive Manufacturing und 3D-Drucken für Prototyping – Tooling – Produktion Auflage: 5, neu bearbeitete und, erweiterte. Hanser, München

[GOEL21]

Goel S, Zaninelli E, Gårdstam J et al (2021) Microstructure evolution-based design of thermal post-treatments for EBM-built Alloy 718. J Mater Sci 56:5250–5268. https://doi.org/10.1007/s10853-020-05595-2

[GRUB20]

Gruber S, Ch, Grunert, Riede M, López E, Marquardt A, Brueckner F, Ch, Leyens (2020) Comparison of dimensional accuracy and tolerances of powder bed based and nozzle based additive manufacturing processes. J Laser Appl 32:032016. https://doi.org/10.2351/7.0000115

[GRUN15]

Grund M (2015) Implementierung von schichtadditiven Fertigungsverfahren. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-44266-1

[GU15]

Gu D (2015) Laser Additive Manufacturing of High-Performance Materials. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-46089-4

[GUST18]

Gustmann T, Schwab H, Kühn U, Pauly S (2018) Selective Laser Remelting of an Additively Manufactured Cu-Al-Ni-Mn Shape Memory Alloy. Mater Des 153:129–138. https://doi.org/10.1016/j.matdes.2018.05.010

[HAAS17]

Haase C, Bültmann J, Hof J, Ziegler S, Bremen S, Hinke C, Schwedt A, Prahl U, Bleck W (2017) Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel. Materials 1(10):56. https://doi.org/10.3390/ma10010056

[HAFE19]

Hafenstein S (2019) Heißisostatisches Pressen von Aluminiumgusslegierungen mit integrierter Wärmebehandlung. Springer, Berlin. https://doi.org/10.1007/978-3-658-25600-5

[HARR15]

Harrison NJ, Todd I, Mumtaz K (2015) Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach. Acta Mater 94:59–68. https://doi.org/10.1016/j.actamat.2015.04.035

[HORN17]

Hornbogen E, Eggeler G, Werner E (2017) Werkstoffe. Aufbau und Eigenschaften von Keramik-, Metall-, Polymer- und Verbundwerkstoffen. Springer Verlag, 2017. https://doi.org/10.1007/978-3-642-53867-4

[HUEG09]

Hügel H, Graf T (2009) Laser in der Fertigung: Strahlquellen, Systeme, Fertigungsverfahren, 2. Aufl.Vieweg + Teubner, Wiesbaden. https://doi.org/10.1007/978-3-8348-9570-7

[IBHA23]

Ibhadode O, Zhang Z, Sixt J, Nsiempba KM, Orakwe J, Martinez-Marchese A, Ero O, Imani Shahabad S, Bonakdar A, Toyserkani E (2023) Topology optimization for metal additive manufacturing: current trends, challenges, and future outlook. Virtual and Physical Prototyping 18:1. https://doi.org/10.1080/17452759.2023.2181192

[JACO02]

Jacobs HJ, Dürr H (2002) Entwicklung und Gestaltung von Fertigungsprozessen. Fachbuchverlag Leipzig

[JIAN18]

Jiang J , Xu X, Stringer J (2018) Support Structures for Additive Manufacturing: A Review. JMMP 2(64). https://doi.org/10.3390/jmmp2040064

[JIA21]

Jia H, Sun H, Wang H (2021) Scanning strategy in selective laser melting (SLM): a review. Int J Adv Manuf Technol 113:2413–2435. https://doi.org/10.1007/s00170-021-06810-3

[KADI20]

Kadir AZA, Yusof Y, Wahab MS (2020) Additive manufacturing cost estimation models – a classification review. Int J Adv Manuf Technol 107:4033–4053. https://doi.org/10.1007/s00170-020-05262-5

[KAHN14]

Kahnert M (2014) Scanstrategien zur verbesserten Prozessführung beim Elektronenstrahlschmelzen (EBM). Dissertation, TU München

[KING14]

King WE, Barth HD, Castillo VM, Gallegos GF, Gibbs JW, Hahn DE, Kamath C, Rubenchik AM (2014) Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. J Mater Process Technol 214(12):2915–2925. https://doi.org/10.1016/j.jmatprotec.2014.06.005

[KLAH15]

Ch, Klahn (2015) Laseradditiv gefertigte, luftdurchlässige Mesostrukturen. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-47761-8

[KLAH21]

Klahn Ch, Meboldt M (2021) Entwicklung und Konstruktion für die Additive Fertigung. 2. Aufl. Vogel Fachbuchverlag

[KLES18]

Kleszczynski S (2018) Potenziale der bildgestützten Prozessüberwachung zur Steigerung des technologischen Reifegrades von Laser-Strahlschmelzverfahren. Dissertation, Universität Duisburg-Essen

[KLING19]

Klingbeil N (2019) Untersuchung des Drahtsystems zur Prozessstabilisierung für das drahtbasierte Laserauftragschweißen in der additiven Fertigung. Dissertation RWTH Aachen, Apprimus Verlag

[KLOC15]

Klocke F (2015) Fertigungsverfahren 5. Springer, Berlin Heidelberg. https://doi.org/10.1007/978-3-540-69512-7

[KLOC17]

Klocke F (2017) Fertigungsverfahren 2. Zerspanung mit geometrisch unbestimmter Schneide, 6. Aufl. Springer Verlag, Berlin. https://doi.org/10.1007/978-3-662-58092-9

[KOU03]

Kou S (2003) Solidification and liquation cracking issues in welding. JOM 55(6):37–42. https://doi.org/10.1007/s11837-003-0137-4

[KRAN19]

Kranz J (2017) Methodik und Richtlinien für die Konstruktion von laseradditiv gefertigten Leichtbaustrukturen. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-55339-8

[KRUT04]

Kruth JP, Froyen L, Van Vaerenbergh J, Mercelis P, Rombouts M, Lauwers B (2004) Selective laser melting of iron-based powder. J Mater Process Technol 149(1–3):616–622. https://doi.org/10.1016/j.jmatprotec.2003.11.051

[KOOP20]

Koopmann J (2020) Multimaterialdruck von integrierten elektrischen Strukturen mittels selektivem Laserschmelzen. Dissertation, Kassel University Press GmbH

[LACH20]

Lachmayer R, Rettschlag K, Kaierle S (2019) Konstruktion für die Additive Fertigung. Springer, Berlin. https://doi.org/10.1007/978-3-662-61149-4

[LANG13]

Langbein S, Czechowicz A (2021) Konstruktionspraxis Formgedächtnistechnik. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-8348-2343-4

[LANG21]

Langelandsvik G, Akselsen OM, Furu T, Roven HJ (2021) Review of Aluminum Alloy Development for Wire Arc Additive Manufacturing. Materials 14(18):5370. https://doi.org/10.3390/ma14185370

[LEBR15]

LeBrun T, Nakamoto T, Horikawa K, Kobayashi H (2015) Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17-4 PH stainless steel. Materials & Design 81:44–53. https://doi.org/10.1016/j.matdes.2015.05.026

[LIND12]

Lindemann C, Jahnke U, Moi M, Koch R (2012) Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additive Manufacturing. In 23rd Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, Austin/TX/USA, 6th–8th August. Austin, TX

[LIND18]

Lindecke PNJ, Blunk H, Wenzl J-P, Möller M, Emmelmann C (2018) Optimization of support structures for the laser additive manufacturing of TiAl6V4 parts. Procedia CIRP 74:53–58. https://doi.org/10.1016/j.procir.2018.08.029

[LIPP18]

Lippert RB (2018) Restriktionsgerechtes Gestalten gewichtsoptimierter Strukturbauteile für das Selektive Laserstrahlschmelzen, TEWISS – Technik und Wissen GmbH Verlag, Garbsen

[MANF14]

Manfredi D, Calignano F, Krishnan M, Canali R, Ambrosio EP, Ugues BS, D, Pavese M, Fino P, (2014) Additive manufacturing of Al alloys and aluminum matrix composites (AMCs). In Book: Light Metal Alloys ApplicationsEditors: Waldemar A Monteiro. https://doi.org/10.5772/58534

[MARK22]

Markovitc T, Vagra FL (2022) Characterizing the strength of support-model connection in the case of laser powder bed fusion technology by torsion test. Opt Laser Technol 154:108356. https://doi.org/10.1016/j.optlastec.2022.108356

[MART17]

Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM (2017) 3D printing of high-strength aluminium alloys. Nature 549:365–369. https://doi.org/10.1038/nature23894

[MATT16]

Matthews MJ, Guss G, Khairallah SA, Rubenchik AM, Depond PJ, King WE (2016) Denudation of metal powder layers in laser powder bed fusion processes. Acta Mater 114:33–42. https://doi.org/10.1016/j.actamat.2016.05.017

[MILE17]

Milewski OJ (2017) Additive Manufacturing of Metals. Springer International. https://doi.org/10.1007/978-3-319-58205-4_2

[MUNS13]

Munsch M (2013) Reduzierung von Eigenspannungen und Verzug in der laseradditiven Fertigung. Dissertation, Uni Göttingen

[NEGI19]

Negi S, Nambolan AA, Kapil S, Joshi PS, Manivannan R, Karunakaran KP, Bhargava P, Seema N (2020) Review on electron beam based additive manufacturing. Rapiod Prototyping Journal 26(3):485–498. https://doi.org/10.1108/RPJ-07-2019-0182

[NEST06]

Nestler K, Adamitzki W, Unger M, Faust W, Meyer W (2006) Plasma Polishing of Metallic Surfaces – Effects and Models. Int. Symp. on Electrochemical Machining Technology; INSECT 2006, Dresden

[NILS18]

Nils P, Lindecke J, Blunk H, Wenzl JP, Möller M, Emmelmann C (2018) Optimization of support structures for the laser additive manufacturing of TiAl6V4 parts. Procedia CIRP 74:53–58. https://doi.org/10.1016/j.procir.2018.08.029

[OVER03]

Over C (2003) Generative Fertigung von Bauteilen aus Werkzeugstahl X38CrMoV5–1 und Titan TiAl6V4 mit “Selective Laser Melting”. Dissertation, RWTH Aachen

[PRAS14]

Prashanth KG, Scudino S, Klauss HJ, Surreddi KB, Löber L, Wang Z, Chaubey AK, Kühn U, Eckert J (2014) Microstructure and mechanical properties of Al-12Si produced by selective laser melting: effect of heat treatment. Material Science and Engineering A 590:153–160. https://doi.org/10.1016/j.msea.2013.10.023

[PRIA17]

Priarone PC, Robiglio M, Ingarao G, Settineri L (2017) Assessment of cost and energy requirements of Electron beam melting (EBM) and machining processes. Springer International Publishing, Cham

[RIEM14]

Riemer A, Leuders S, Thoene M, Richard HA, Troester T, Niendorf T (2014) On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting. Eng Fract Mech 120:15–25. https://doi.org/10.1016/j.engfracmech.2014.03.008

[QI19]

Qi Z, Qi B, Cong B, Sun H, Zhao G, Ding J (2019) Microstructure and mechanical properties of wire + arc additively manufactured 2024 aluminum alloy components: As-deposited and post heat-treated. J Manuf Process 40:27–36. https://doi.org/10.1016/j.jmapro.2019.03.003

[RICK13]

Rickenbacher L (2013) An integrated cost-model for selective laser melting (SLM). Rapid Prototyp J 19(3):208–214. https://doi.org/10.1108/13552541311312201

[RIEM14]

[RIQU17]

Riquelme A, Escalera-Rodríguez MD, Rodrigo P, Otero E, Rams J (2017) Effect of alloy elements added on microstructure and hardening of Al/SiC laser clad coatings. J Alloy Compd 727:671–682. https://doi.org/10.1016/j.jallcom.2017.08.153

[RIQU20]

Riquelme A, Rodrigo P, Escalera-Rodríguez MD, Rams J (2020) Additively Manufactured Al/SiC Cylindrical Structures by Laser Metal Deposition. Materials 13(15):3331. https://doi.org/10.3390/ma13153331

[RITT20]

Rittinghaus, S.-K (2020) Laserauftragschweißen von γ-Titanaluminiden als Verfahren der additiven Fertigung. Dissertation, RWTH Aachen

[RODR19]

Rodrigues TA, Duarte V, Miranda RM, Santos TG, Oliveira JP (2019) Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM). Materials 12:1121. https://doi.org/10.3390/ma12071121

[RYAN18]

Ryan EM, Sabin TJ, Watts JF, Whiting MJ (2018) The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminiumalloy 2319. J Mater Process Tech 262:577–584. https://doi.org/10.1016/j.jmatprotec.2018.07.030

[SAED15]

Saeidi K, Gao X, Zhong Y, Shen ZJ (215) Hardened austenite steel with columnar sub-grain structure formed by laser melting. Materials Science and Engineering: A 625: 221–229. https://doi.org/10.1016/j.msea.2014.12.018

[SAND17]

Sander J, Hufenbach J, Bleckmann M et al (2017) Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and properties. J Mater Sci 52:4944–4956. https://doi.org/10.1007/s10853-016-0731-9

[SAND18]

Sander J (2018) Selektives Laserschmelzen hochfester Werkzeugstähle. Dissertation, TU Dresden

[SHAH24]

Shah A, Aliyev R, Zeidler H, Krinke S (2024) Investigation for Multi-Layer CuAl8 and Multi-Material (CuAl8-Mild Steel) Deposition via WAAM Process. Advances in Science and Technology 148:(47–56). https://doi.org/10.4028/p-nIE7O5

[SCHU22]

Schulze HP, Zeidler H, Kröning O et al (2022) Process analysis of plasma-electrolytic polishing (PeP) of forming tools. Int J Mater Form 15(6). https://doi.org/10.1007/s12289-022-01659-7

[SCIA22]

Benefits of Wire vs. Powder Metal 3D Printing. Online: https://www.sciaky.com/additive-manufacturing/wire-vs-powder. Zugegriffen: 14. Juli 2024

[SEYD18]

Seyda V (2018) Werkstoff- und Prozessverhalten von Metallpulvern in der laseradditiven Fertigung. Springer, Berlin. https://doi.org/10.1007/978-3-662-58233-6

[SHI16]

Shi X, Ma S, Liu C, Chen C, Wu Q, Chen X, Lu J (2016) Performance of High Layer Thickness in Selective Laser Melting of Ti6Al4V. J.f. Materials 9(12):975. https://doi.org/10.3390/ma9120975

[SING17]

Singer F, Deisenroth DC, Hymas DM, Ohadi MM (2016) Additively manufactured copper components and composite structures for thermal management applications. 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), S. 174–183, https://doi.org/10.1109/ITHERM.2017.7992469

[SKRI02]

Skrinsky Y (2002) Einfluß von heiß- und kaltisostatischem Pressen auf die „statischen“ mechanischen Werkstoffkennwerte von Gußteilen aus Aluminiumlegierungen. Dissertation, Otto-von-Guericke-Universität

[SLM22]

Nikon SLM Solutions Technology: https://www.slm-solutions.com/products-and-solutions/machines/. Zugegriffen: 06. Okt 2022

[SMIT16]

Smith CJ, Derguti F, Hernandez Nava E, Thomas M, Tammas-Williams S, Gulizia S, Fraser D, Todd I(2016) Dimensional accuracy of Electron Beam Melting (EBM) additive manufacture with regard to weight optimized truss structures. J Mater Process Technol 229:128–138. https://doi.org/10.1016

[SOMM21]

Sommer D, Götzendorfer B, Esen C, Hellmann R (2021) Design Rules for Hybrid Additive Manufacturing Combining Selective Laser Melting and Micromilling. Material 14:5753. https://doi.org/10.3390/ma14195753

[STEP21]

Stepputat V, Zeidler H, Safranchik D, Strokin E (2021) Böttger-Hiller F (2022) Investigation of Post-Processing of Additively Manufactured Nitinol Smart Springs with Plasma-Electrolytic Polishing. Materials 14(15):4093. https://doi.org/10.3390/ma14154093

[TAN21]

Tan Z, Gao S, Lan L et al (2021) Effect of Rescanning Strategy on Residual Stress and Distortion of Two Alloys Manufactured by Selective Laser Melting. J Mater Eng Perform 30:6493–6501. https://doi.org/10.1007/s11665-021-05872-4

[TAMM15]

Tammas-Williams S, Zhao H, Leonard F, Derguti F, Todd I, Prangnell PB (2015) XCT analyses of the influence of melt strategies on defect population in Ti-6Al-4V components manufactured by selective electron beam melting. Mater Charact 102:47–61. https://doi.org/10.1016/j.matchar.2015.02.008

[THAN19]

Thanki A, Goossens L, Mertens R, Probst G, Dewulf W, Witvrouw A, Yang S (2019) Study of keyhole-porosities in selective laser melting using X-ray computed tomography. Conference: 9th Conference on Industrial Computed Tomography (iCT) 2019At: Padova, Italy

[THIJ13]

Thijs L, Montero Sistiaga ML, Wauthle R, Xie Q, Kruth JP, van Humbeeck J (2013) Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum. Acta Mater 61(12):4657–4668. https://doi.org/10.1016/j.actamat.2013.04.036

[THIL92]

Thilow AP, Prüller H (1992) Grundlagen der Gleitschleiftechnik. Entgrat-Technik: Entwicklungsstand und Problemlösungen. Kontakt & Studium 392:43–73

[THOM09]

Thomas D (2009) The development of design rules for selective laser melting. Doctoral dissertation, University of Wales

[THOM14]

Thomas D, Gilbert S (2014) Costs and Cost Effectiveness of Additive Manufacturing. Special Publication (NIST SP), National Institute of Standards and Technology, Gaithersburg, MD. https://doi.org/10.6028/NIST.SP.1176

[TOYS21]

Toyserkani E, Sarker D, Obehi Ibhadode O, Liravi F, Russo P, Taherkhani K (2021) Metal Additive Manufacturing. Wiley, S 624

[TRUM24]

Additive Fertigungssysteme. Online: https://www.trumpf.com/de_DE/produkte/maschinen-systeme/additive-fertigungssysteme/pulver-und-parameter/. Zugegriffen: 18. Juli 2024

[TWIS22]

Produktkatalog der Fa. BMF Vertriebs GmbH, 2022

[UEN20]

Ünsal I, Hirtler M, Sviridov A, Bambach M (2020) Material Properties of Features Produced from EN AW6016 by Wire-Arc Additive Manufacturing. Procedia Manuf 47:1129–1133. https://doi.org/10.1016/j.promfg.2020.04.131

[VERN22]

Verna E, Genta G, Galetto M, Franceschini F (2022) Economic impact of quality inspection in manufacturing: A proposal for a novel cost modeling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 236(11):1508–1517. https://doi.org/10.1177/09544054221078090

[VILA11]

Vilaro T, Colin C, Bartout JD (2011) As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Metall and Mater Trans A 42:3190–3199. https://doi.org/10.1007/s11661-011-0731-y

[WANG12]

Wang D, Yang Y, Yi Z, Su X (2012) Research on the fabricating quality optimization of the overhanging surface in SLM process. Int J Adv Manuf Tech 65:1471–1484. https://doi.org/10.1007/s00170-012-4271-4

[WANG20]

Wang S, Gu H, Wang W, Li C, Ren L, Wang Z, Zhai Y, Ma P (2020) The Influence of Heat Input on the Microstructure and Properties of Wire-Arc-Additive-Manufactured Al-Cu-Sn Alloy Deposits. Metals 10(1):79. https://doi.org/10.3390/met10010079

[WAYN14]

Wayne EK, Holly DB, Victor MC, Gilbert F, Gallegos JW, Gibbs DE, Hahn CK, Alexander MR (2014) Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. J Mater Process Technol 214(12):2915–2925. https://doi.org/10.1016/j.jmatprotec.2014.06.005

[WEIN15]

Weingarten C, Buchbinder D, Pirch N, Meiners W, Wissenbach K, Poprawe R (2015) Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg. J Mater Process Technol 221:112–120. https://doi.org/10.1016/j.jmatprotec.2015.02.013

[WERN19]

Werner E, Hornbogen E, Jost N, Eggeler G (2019) Fragen und Antworten zu Werkstoffen. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-58845-1

[WEST10]

Westkämper E, Warnecke HJ (2010) Einführung in die Fertigungstechnik. Vieweg+Teubner Verlag Wiesbaden. https://doi.org/10.1007/978-3-8348-9798-5

[WIED14]

Wiedemann R (2014) Prozessmodell und Systemtechnik für das laserunterstützte Fräsen. Dissertation, TU München

[WILH99]

Wilhelm M (1999) Direktes Selektives Laser Sintern einkomponentiger metallischer Werkstoffe, Dissertation, RWTH Aachen

[WISC21]

Wischeropp TM (2021) Advancement of Selective Laser Melting by Laser Beam Shaping. Springer, Berlin. https://doi.org/10.1007/978-3-662-64585-7

[WOHL23]

Wohlers Report (2023) Wohlers Associates Inc.

[WU16]

Wu J, Wang XQ, Wang W, Attallah MM, Loretto MH (2016) Microstructure and strength of selectively laser melted AlSi10Mg. Acta Mater 117:311–320. https://doi.org/10.1016/j.actamat.2016.07.012

[WU18]

Wu B, Pan Z, Ding D, Cuiuri D, Li H, Xu J, Norrish J (2018) A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. J Manuf Process 35:127–139. https://doi.org/10.1016/j.jmapro.2018.08.001

[WU21]

Wu, L (2021) Topology optimization of support structure for selective laser melting process. PHD Thesis, Nanyang Technological University, Singapore. https://doi.org/10.32657/10356/151396

[XIA17]

Xia M, Liu A, Hou Z, Li N, Chen Z, Ding H (2017) Microstructure growth behavior and its evolution mechanism during laser additive manufacture of in-situ reinforced (TiB+TiC)/Ti composite. J Alloy Compd 728:436–444. https://doi.org/10.1016/j.jallcom.2017.09.033

[YANG17]

Yang L, Hsu K, Baughman B, Godfrey D, Medina F, Menon M, Wiener S (2017) Additive Manufacturing of Metals: The Technology, Materials, Design and Production. Springer Cham. https://doi.org/10.1007/978-3-319-55128-9

[ZEID06]

Zeidler H, Prschuta A, Lingath K, Boehm S, Kluchert C, Ohle V, Meyer W (2006) Anlage und Verfahren zum Reinigen und Polieren der elektrisch leitfähigen Oberfläche eines Werkstückes. Patent: DE102006016368A1

[ZEID21]

Zeidler H, Aliyev R, Gindorf F (20ß21) Efficient Finishing of Laser Beam Melting Additive Manufactured Parts. JMMP 5(4):106. https://doi.org/10.3390/jmmp5040106

[ZHAN13]

Zhang J, Liou FW (2013) Multi-Axis Planning of a Hybrid Material Deposition and Removal Combined Process. J Mach Manuf Autom 2(3):46–57. Online: https://core.ac.uk/download/pdf/229209673.pdf

[ZHAN15]

Zhang DY, Niu W, Cao XY, Liu Z (2015) Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy. Mater Sci Eng A 32:644. https://doi.org/10.1016/j.msea.2015.06.021

[ZHON17]

Zhong Y (2015) Sub-grain structure in additive manufactured stainless steel 316L. Dissertation, Stockholms University

Titel: Fertigungsplanung für die additive Fertigung von metallischen Teilen
verfasst von: Rezo Aliyev
Verlag: Springer Berlin Heidelberg
Buch: Planung von additiven Fertigungsprozessen
Print ISBN: 978-3-662-70198-0

Electronic ISBN: 978-3-662-70199-7

Copyright-Jahr: 2025
DOI: https://doi.org/10.1007/978-3-662-70199-7_5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Bildnachweise

MKVS GbR/© MKVS GbR, Nordson/© Nordson, ViscoTec/© ViscoTec, BCD Chemie GmbH, Merz+Benteli/© Merz+Benteli, Robatech/© Robatech, Hermann Otto GmbH/© Hermann Otto GmbH, Ruderer Klebetechnik GmbH, Fere/© Fere, Xometry Europe GmbH/© Xometry Europe GmbH, Scheugenpflug/© Scheugenpflug, Sika/© Sika, Medmix/© Medmix, Kisling AG/© Kisling AG, Dosmatix GmbH/© Dosmatix GmbH, Innotech GmbH/© Innotech GmbH, Hilger u. Kern GmbH, VDI Logo/© VDI Wissensforum GmbH