Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2020 | OriginalPaper | Buchkapitel

Finish Hard Turning: A Review of Minimum Quantity Lubrication Using Paraffin-Based Nanofluids

verfasst von: Faraj Saeid Adrees Majeed, Nordin Bin Mohd Yusof, Mohd Azlan Suhaimi

Erschienen in: Advances in Lightweight Materials and Structures

Verlag: Springer Singapore

share
TEILEN

Abstract

A wide range of cooling techniques for hard turning machining continues to be proposed and assessed. In this review, the overall characteristics of cutting tools and stainless steel materials were reviewed in terms of vibration, surface roughness, cutting force, and tool life while using minimum quantity lubrication (MQL) with paraffin-based nanofluids. Nanoparticles are particularly appealing in MQL due to its remarkable improvement in the cutting conditions. Under aggressive machining conditions, the lubricant media tends to evaporate or disintegrate when in contact with the cutting tool. With the addition of high thermal conductivity nanoparticle additives as cutting fluid, the performance of the MQL technique has improved remarkably. This review exposed that a few work has used MQL with nanofluid when machining martensitic stainless steel AISI 420 using TiAlN-coated carbide cutting tool. Furthermore, the application of MQL via paraffin oil, γ-Fe2O3, and xGnP nanofluid when machining hardened stainless steel using coated carbide cutting tools has not yet been examined.

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
1.
Zurück zum Zitat Liew PJ et al (2017) An overview of current status of cutting fluids and cooling techniques of turning hard steel. Int J Heat Mass Trans 114:380–394 Liew PJ et al (2017) An overview of current status of cutting fluids and cooling techniques of turning hard steel. Int J Heat Mass Trans 114:380–394
2.
Zurück zum Zitat Hegab H et al (2019) A model for machining with nano-additives based minimum quantity lubrication. Int J Adv Manuf Technol 1–16 Hegab H et al (2019) A model for machining with nano-additives based minimum quantity lubrication. Int J Adv Manuf Technol 1–16
3.
Zurück zum Zitat Hanif M et al (2019) Optimization of process parameters using graphene-based dielectric in electric discharge machining of AISI D2 steel. Int J Adv Manuf Technol 1–15 Hanif M et al (2019) Optimization of process parameters using graphene-based dielectric in electric discharge machining of AISI D2 steel. Int J Adv Manuf Technol 1–15
4.
Zurück zum Zitat Da Silva RB et al (2017) Surface integrity and tool life when turning of Ti-6Al-4V with coolant applied by different methods. Int J Adv Manuf Techno 93(5):1893–1902 Da Silva RB et al (2017) Surface integrity and tool life when turning of Ti-6Al-4V with coolant applied by different methods. Int J Adv Manuf Techno 93(5):1893–1902
5.
Zurück zum Zitat Hafiz MSA et al (2017) A review on feasibility study of ultrasonic assisted machining on aircraft component manufacturing. IOP Conf Series Mater Sci Eng 270:012034 Hafiz MSA et al (2017) A review on feasibility study of ultrasonic assisted machining on aircraft component manufacturing. IOP Conf Series Mater Sci Eng 270:012034
6.
Zurück zum Zitat Ghosh S, Rao P (2019) Comparison between sustainable cryogenic techniques and nano-MQL cooling mode in turning of nickel-based alloy. J Cleaner Prod 231:1036–1049 Ghosh S, Rao P (2019) Comparison between sustainable cryogenic techniques and nano-MQL cooling mode in turning of nickel-based alloy. J Cleaner Prod 231:1036–1049
7.
Zurück zum Zitat Marini D, Cunningham D, Corney JR (2017) Near net shape manufacturing of metal: A review of approaches and their evolutions. Proc Instit Mech Eng Part B J Eng Manuf 232(4):650–669 Marini D, Cunningham D, Corney JR (2017) Near net shape manufacturing of metal: A review of approaches and their evolutions. Proc Instit Mech Eng Part B J Eng Manuf 232(4):650–669
8.
Zurück zum Zitat Alkali AU et al (2013) Influence of cutting conditions on chip formation when turning ASSAB DF-3 Hardened tool steel. Int J Mater Mech Manuf 1:76–79 Alkali AU et al (2013) Influence of cutting conditions on chip formation when turning ASSAB DF-3 Hardened tool steel. Int J Mater Mech Manuf 1:76–79
9.
Zurück zum Zitat Sharma V, Pandey PM (2016) Recent advances in turning with textured cutting tools: a review. J Cleaner Prod 137:701–715 Sharma V, Pandey PM (2016) Recent advances in turning with textured cutting tools: a review. J Cleaner Prod 137:701–715
10.
Zurück zum Zitat Rifat M, Rahman MH, Das D (2017) A review on application of nanofluid MQL in machining. In: AIP Conference Proceedings. AIP Publishing Rifat M, Rahman MH, Das D (2017) A review on application of nanofluid MQL in machining. In: AIP Conference Proceedings. AIP Publishing
11.
Zurück zum Zitat Harshit Bhalachandra K et al (2017) A review on nanofluids for machining. Curr Nanosci 13(6):634–653 Harshit Bhalachandra K et al (2017) A review on nanofluids for machining. Curr Nanosci 13(6):634–653
12.
Zurück zum Zitat Sharif S et al (2017) A review of minimum quantity lubrication technique with nanofluids application in metal cutting operations. Int J Adv Sci Eng Info Technol 7(2):587–593 Sharif S et al (2017) A review of minimum quantity lubrication technique with nanofluids application in metal cutting operations. Int J Adv Sci Eng Info Technol 7(2):587–593
13.
Zurück zum Zitat Kumar A, Pradhan SK (2018) Investigations into hard turning process using wiper tool inserts. Mater Today Proc 5(5, Part 2):12579–12587 Kumar A, Pradhan SK (2018) Investigations into hard turning process using wiper tool inserts. Mater Today Proc 5(5, Part 2):12579–12587
14.
Zurück zum Zitat Kumar Singh R et al (2018) Influence of graphene-based nanofluid with minimum quantity lubrication on surface roughness and cutting temperature in turning operation. Mater Today Proc 5(11)24578–24586 Kumar Singh R et al (2018) Influence of graphene-based nanofluid with minimum quantity lubrication on surface roughness and cutting temperature in turning operation. Mater Today Proc 5(11)24578–24586
15.
Zurück zum Zitat Nguyen D et al (2019) Wear performance evaluation of minimum quantity lubrication with exfoliated graphite nanoplatelets in turning titanium alloy. J Manuf Sci Eng 141(8) Nguyen D et al (2019) Wear performance evaluation of minimum quantity lubrication with exfoliated graphite nanoplatelets in turning titanium alloy. J Manuf Sci Eng 141(8)
16.
Zurück zum Zitat Maruda RW et al (2019) The influence of the application of EP additive in the minimum quantity cooling lubrication method on the tool wear and surface roughness in the process of turning 316L steel. In: Advances in manufacturing engineering and materials. Springer International Publishing, Cham Maruda RW et al (2019) The influence of the application of EP additive in the minimum quantity cooling lubrication method on the tool wear and surface roughness in the process of turning 316L steel. In: Advances in manufacturing engineering and materials. Springer International Publishing, Cham
17.
Zurück zum Zitat Masoudi S et al (2018) Experimental investigation into the effects of nozzle position, workpiece hardness, and tool type in MQL turning of AISI 1045 steel. Mater Manuf Process 33(9):1011–1019 Masoudi S et al (2018) Experimental investigation into the effects of nozzle position, workpiece hardness, and tool type in MQL turning of AISI 1045 steel. Mater Manuf Process 33(9):1011–1019
18.
Zurück zum Zitat Singh RK et al (2017) Emerging application of nanoparticle-enriched cutting fluid in metal removal processes: a review. J Brazilian Soc Mech Sci Eng 39(11):4677–4717 Singh RK et al (2017) Emerging application of nanoparticle-enriched cutting fluid in metal removal processes: a review. J Brazilian Soc Mech Sci Eng 39(11):4677–4717
19.
Zurück zum Zitat Joshi KK, Behera RK, Anurag (2018) Effect of minimum quantity lubrication with Al 2O 3 Nanofluid on Surface Roughness and its prediction using hybrid fuzzy controller in turning operation of Inconel 600. Mater Today Proc 5(9, Part 3):20660–20668 Joshi KK, Behera RK, Anurag (2018) Effect of minimum quantity lubrication with Al 2O 3 Nanofluid on Surface Roughness and its prediction using hybrid fuzzy controller in turning operation of Inconel 600. Mater Today Proc 5(9, Part 3):20660–20668
20.
Zurück zum Zitat Divijak JM (1970) Production of technical white mineral oil. Google Patents Divijak JM (1970) Production of technical white mineral oil. Google Patents
21.
Zurück zum Zitat Rawlings A, Lombard K (2012) A review on the extensive skin benefits of mineral oil. Int J Cosmet Sci 34(6):511–518 Rawlings A, Lombard K (2012) A review on the extensive skin benefits of mineral oil. Int J Cosmet Sci 34(6):511–518
22.
Zurück zum Zitat Darma I (2008) Dielectric properties of mixtures between mineral oil and natural ester from palm oil. World Scientific and Engineering Academy and Society (WSEAS). Trans Power Syst 3(2):37–46 Darma I (2008) Dielectric properties of mixtures between mineral oil and natural ester from palm oil. World Scientific and Engineering Academy and Society (WSEAS). Trans Power Syst 3(2):37–46
23.
Zurück zum Zitat Kumar D, Mishra DK (2018) Surfactant controlled lubricity of paraffin oil-based nano-emulsion. Tribol-Mater Surf Interf 12(3):130–136 Kumar D, Mishra DK (2018) Surfactant controlled lubricity of paraffin oil-based nano-emulsion. Tribol-Mater Surf Interf 12(3):130–136
24.
Zurück zum Zitat Asadauskas SJ, Biresaw G, McClure TG (2010) Effects of chlorinated paraffin and ZDDP concentrations on boundary lubrication properties of mineral and soybean oils. Tribol Lett 37(2):111–121 Asadauskas SJ, Biresaw G, McClure TG (2010) Effects of chlorinated paraffin and ZDDP concentrations on boundary lubrication properties of mineral and soybean oils. Tribol Lett 37(2):111–121
25.
Zurück zum Zitat Noordin M, Kurniawan D, Sharif S (2007) Hard turning of stainless steel using wiper coated carbide tool. Int J Precision Technol 1(1):75–84 Noordin M, Kurniawan D, Sharif S (2007) Hard turning of stainless steel using wiper coated carbide tool. Int J Precision Technol 1(1):75–84
26.
Zurück zum Zitat Rosa GC, Souza AJ, Lorini FJ (2014) Comparative analysis on wiper and standard tools in dry finish turning of martensitic stainless steel AISI 420. In: Advanced Materials Research. Trans Tech Publications Rosa GC, Souza AJ, Lorini FJ (2014) Comparative analysis on wiper and standard tools in dry finish turning of martensitic stainless steel AISI 420. In: Advanced Materials Research. Trans Tech Publications
27.
Zurück zum Zitat Nune MMR, Chaganti PK (2017) Experimental investigation on turning of turbine blade material AISI 410 under minimum quantity cutting fluid. Mater Today Proc 4(2):1057–1064 Nune MMR, Chaganti PK (2017) Experimental investigation on turning of turbine blade material AISI 410 under minimum quantity cutting fluid. Mater Today Proc 4(2):1057–1064
28.
Zurück zum Zitat Kurniawan D, Yusof NM, Sharif S (2010) Hard machining of stainless steel using wiper coated carbide: tool life and surface integrity. Mater Manuf Process 25(6):370–377 Kurniawan D, Yusof NM, Sharif S (2010) Hard machining of stainless steel using wiper coated carbide: tool life and surface integrity. Mater Manuf Process 25(6):370–377
29.
Zurück zum Zitat Bruni C et al (2006) Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B. Int J Mach Tools Manuf 46(12–13):1547–1554 Bruni C et al (2006) Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B. Int J Mach Tools Manuf 46(12–13):1547–1554
30.
Zurück zum Zitat Elmunafi MHS, Kurniawan D, Noordin M (2015) Use of castor oil as cutting fluid in machining of hardened stainless steel with minimum quantity of lubricant. Procedia CIRP 26:408–411 Elmunafi MHS, Kurniawan D, Noordin M (2015) Use of castor oil as cutting fluid in machining of hardened stainless steel with minimum quantity of lubricant. Procedia CIRP 26:408–411
31.
Zurück zum Zitat Elshwain AE et al (2017) Machinability of stainless tool steel using nitrogen oil-mist coalant. Becтник Bopoнeжcкoгo Гocyдapcтвeннoгo Yнивepcитeтa Инжeнepныx Тexнoлoгий 79(3):143–147 Elshwain AE et al (2017) Machinability of stainless tool steel using nitrogen oil-mist coalant. Becтник Bopoнeжcкoгo Гocyдapcтвeннoгo Yнивepcитeтa Инжeнepныx Тexнoлoгий 79(3):143–147
32.
Zurück zum Zitat Krishnamurthy S et al (2006) Enhanced mass transport in nanofluids. Nano Lett 6(3):419–423 Krishnamurthy S et al (2006) Enhanced mass transport in nanofluids. Nano Lett 6(3):419–423
33.
Zurück zum Zitat Lee S et al (1999) Measuring thermal conductivity of fluids containing oxide nanoparticles. J Heat Transfer 121(2):280–289 Lee S et al (1999) Measuring thermal conductivity of fluids containing oxide nanoparticles. J Heat Transfer 121(2):280–289
34.
Zurück zum Zitat Eastman JA et al (2001) Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles. Appl Phys Lett 78(6):718–720 Eastman JA et al (2001) Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles. Appl Phys Lett 78(6):718–720
35.
Zurück zum Zitat Teng T-P, Yu C-C (2013) Heat dissipation performance of MWCNTs nano-coolant for vehicle. Exp Thermal Fluid Sci 49:22–30 Teng T-P, Yu C-C (2013) Heat dissipation performance of MWCNTs nano-coolant for vehicle. Exp Thermal Fluid Sci 49:22–30
36.
Zurück zum Zitat Hwang Y et al (2006) Thermal conductivity and lubrication characteristics of nanofluids. Curr Appl Phys 6:e67–e71 Hwang Y et al (2006) Thermal conductivity and lubrication characteristics of nanofluids. Curr Appl Phys 6:e67–e71
37.
Zurück zum Zitat Daungthongsuk W, Wongwises S (2007) A critical review of convective heat transfer of nanofluids. Renew Sustain Energy Rev 11(5):797–817 Daungthongsuk W, Wongwises S (2007) A critical review of convective heat transfer of nanofluids. Renew Sustain Energy Rev 11(5):797–817
38.
Zurück zum Zitat Albadr J, Tayal S, Alasadi M (2013) Heat transfer through heat exchanger using Al 2O 3 nanofluid at different concentrations. Case Stud Therm Eng 1(1):38–44 Albadr J, Tayal S, Alasadi M (2013) Heat transfer through heat exchanger using Al 2O 3 nanofluid at different concentrations. Case Stud Therm Eng 1(1):38–44
39.
Zurück zum Zitat Saidur R, Leong K, Mohammad HA (2011) A review on applications and challenges of nanofluids. Renew Sustain Energy Rev 15(3):1646–1668 Saidur R, Leong K, Mohammad HA (2011) A review on applications and challenges of nanofluids. Renew Sustain Energy Rev 15(3):1646–1668
40.
Zurück zum Zitat Sharma AK et al (2017) Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel. J Manuf Process 30:467–482 Sharma AK et al (2017) Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel. J Manuf Process 30:467–482
41.
Zurück zum Zitat Faraj Saeid Adrees Majeed et al (2020) Effect of paraffin oil with XGnP and Fe 2O 3 nanoparticles on tribological properties. Mater Today Proc 27(2):1685–1688 Faraj Saeid Adrees Majeed et al (2020) Effect of paraffin oil with XGnP and Fe 2O 3 nanoparticles on tribological properties. Mater Today Proc 27(2):1685–1688
42.
Zurück zum Zitat Padmini R et al (2019) Influence of green nanocutting fluids on machining performance using minimum quantity lubrication technique. Mater Today Proc 18:1435–1449 Padmini R et al (2019) Influence of green nanocutting fluids on machining performance using minimum quantity lubrication technique. Mater Today Proc 18:1435–1449
43.
Zurück zum Zitat Sathishkumar S, Rajmohan T (2018) Multi-response optimization of machining parameters in CNC turning of AISI 316l stainless steel using MQL nano fluids. In: IOP conference series: materials science and engineering.. IOP Publishing Sathishkumar S, Rajmohan T (2018) Multi-response optimization of machining parameters in CNC turning of AISI 316l stainless steel using MQL nano fluids. In: IOP conference series: materials science and engineering.. IOP Publishing
44.
Zurück zum Zitat Krishna PV, Srikant R, Rao DN (2010) Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel. Int J Mach Tools Manuf 50(10):911–916 Krishna PV, Srikant R, Rao DN (2010) Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel. Int J Mach Tools Manuf 50(10):911–916
45.
Zurück zum Zitat Prasad M, Srikant R (2013) Performance evaluation of nano graphite inclusions in cutting fluids with MQL technique in turning of AISI 1040 steel. Int J Res Eng Technol 2(11):381–393 Prasad M, Srikant R (2013) Performance evaluation of nano graphite inclusions in cutting fluids with MQL technique in turning of AISI 1040 steel. Int J Res Eng Technol 2(11):381–393
46.
Zurück zum Zitat Fallah M, Moetakef-Imani B (2019) Adaptive inverse control of chatter vibrations in internal turning operations. Mech Syst Signal Process 129:91–111 Fallah M, Moetakef-Imani B (2019) Adaptive inverse control of chatter vibrations in internal turning operations. Mech Syst Signal Process 129:91–111
47.
Zurück zum Zitat García Plaza E, Núñez López PJ, Beamud González EM (2019) Efficiency of vibration signal feature extraction for surface finish monitoring in CNC machining. J Manuf Process 44:145–157 García Plaza E, Núñez López PJ, Beamud González EM (2019) Efficiency of vibration signal feature extraction for surface finish monitoring in CNC machining. J Manuf Process 44:145–157
48.
Zurück zum Zitat Shrivastava Y, Singh B (2018) Possible way to diminish the effect of chatter in CNC turning based on EMD and ANN approaches. Arabian J Sci Eng 43(9):4571–4591 Shrivastava Y, Singh B (2018) Possible way to diminish the effect of chatter in CNC turning based on EMD and ANN approaches. Arabian J Sci Eng 43(9):4571–4591
49.
Zurück zum Zitat Xu Y et al (2019) Experimental study on chip shape in ultrasonic vibration–assisted turning of 304 austenitic stainless steel. Adv Mech Eng 11(8):1687814019870896 Xu Y et al (2019) Experimental study on chip shape in ultrasonic vibration–assisted turning of 304 austenitic stainless steel. Adv Mech Eng 11(8):1687814019870896
50.
Zurück zum Zitat Yip WS, To S (2019) Reduction of tool tip vibration in single-point diamond turning using an eddy current damping effect. Int J Adv Manuf Technol 103(5):1799–1809 Yip WS, To S (2019) Reduction of tool tip vibration in single-point diamond turning using an eddy current damping effect. Int J Adv Manuf Technol 103(5):1799–1809
51.
Zurück zum Zitat Zeqiri F et al (2018) Experimental research and mathematical modeling of parameters effecting on cutting force and surface roughness in CNC turning process. In IOP conference series: materials science and engineering. IOP Publishing Zeqiri F et al (2018) Experimental research and mathematical modeling of parameters effecting on cutting force and surface roughness in CNC turning process. In IOP conference series: materials science and engineering. IOP Publishing
52.
Zurück zum Zitat Altintas Y (2014) Adaptive control. In: CIRP Encyclopedia of production engineering, pp 17–19. Altintas Y (2014) Adaptive control. In: CIRP Encyclopedia of production engineering, pp 17–19.
53.
Zurück zum Zitat Hassan N (2014) Development of a dynamic model for vibration during turning operation and numerical studies. University of Liverpool Hassan N (2014) Development of a dynamic model for vibration during turning operation and numerical studies. University of Liverpool
Metadaten
Titel
Finish Hard Turning: A Review of Minimum Quantity Lubrication Using Paraffin-Based Nanofluids
verfasst von
Faraj Saeid Adrees Majeed
Nordin Bin Mohd Yusof
Mohd Azlan Suhaimi
Copyright-Jahr
2020
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-7827-4_54

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.