Weitere Artikel dieser Ausgabe durch Wischen aufrufen
Adiabatic shear band (ASB) was narrow region where softening occurred and concentrated plastic deformation took place. In present study, the effects of height reduction and deformation temperature on ASB were investigated by means of optical microscopy (OM) and scanning electron microscopy (SEM). And the deformation mechanisms within the shear band were discussed thoroughly with the help of transmission electron microscopy (TEM). There is a critical strain for the formation of ASB during warm compression of Ti–6Al–4V alloy. The width of ASB increases with height reduction increasing. Elongated alpha grains within shear band grow up with deformation temperature increasing. Some ultrafine grains that confirm the occurrence of dynamic recrystallization are observed within shear band during warm compression of Ti–6Al–4V alloy.
There is a critical strain for the formation of adiabatic shear band during warm compression of Ti–6Al–4V alloy. Some ultrafine grains within shear band are observed during warm compression of Ti–6Al–4V alloy; it confirms the occurrence of dynamic recrystallization of α phase.
Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten
Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:
Meyers MA, Chawla KK. Mechanical Behavior of Materials. 2nd ed. New York: Cambridge University Press; 2009. 14.
Shahan AR, Taheri AK. Adiabatic shear bands in titanium and titanium alloys: a critical review. Mater Des. 1993;14(4):243. CrossRef
Binkowski I, Shrivastav GP, Horbach J, Divinski SV, Wilde G. Shear band relaxation in a deformed bulk metallic glass. Acta Mater. 2016;109:330. CrossRef
Yang Y, Liang LH. Self-organization of adiabatic shear bands in ZK60 magnesium alloy. Mater Sci Eng A. 2016;655:321. CrossRef
Liu L, Song H, Zhao XJ, Zhang T. Extended shear bands in interior of Pd-based bulk metallic glasses. Rare Met. 2015;. doi: 10.1007/s12598-015-0563-9.
Luo YM, Liu JX, Cheng XW, Li SK, Wang FC, Guo WW. Adiabatic shear banding of hot-rolling Ti–6Al–4V alloy subjected to dynamic shearing and uniaxial dynamic compression. Rare Met. 2015;34(9):632. CrossRef
Wang YN, Xin YC, Yu HH, Lv LC, Liu Q. Formation and microstructure of shear bands during hot rolling of a Mg-6Zn-0.5Zr alloy plate with a basal texture. J Alloys Compd. 2015;644:147. CrossRef
Polyzois I, Bassim N. An examination of the formation of adiabatic shear bands in AISI 4340 steel through analysis of grains and grain deformation. Mater Sci Eng A. 2015;631:18. CrossRef
Polyzois I, Bassim N. Microstructural simulation of adiabatic shear band formation in AISI 4340 steel using Voronoi Tessellation. Comput Mater Sci. 2015;109:157. CrossRef
Yuan FP, Bian XD, Jiang P, Yang MX, Wu XL. Dynamic shear response and evolution mechanisms of adiabatic shear band in an ultrafine-grained austenite-ferrite duplex steel. Mech Mater. 2015;89:47. CrossRef
Batra RC, Xiao J. Analysis of adiabatic shear bands in thermo-elasto-viscoplastic materials by using piece-wise discontinuous basis functions. Appl Math Model. 2014;38(23):5367. CrossRef
Kudryashov NA, Ryabov PN, Zakharchenko AS. Self-organization of adiabatic shear bands in OFHC copper and HY-100 steel. J Mech Phys Solids. 2015;76:180. CrossRef
Sen I, Tamirisakandala S, Miracle DB, Ramamurty U. Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloys. Acta Mater. 2007;55(15):4983. CrossRef
Wang BF, Wang XY, Li ZZ, Ma R, Zhao ST, Xie FY, Zhang XY. Shear localization and microstructure in coarse grained beta titanium alloy. Mater Sci Eng A. 2016;652:287. CrossRef
Manda P, Chakkingal U, Singh AK. Hardness characteristic and shear band formation in metastable β-titanium alloys. Mater Charact. 2014;96:151. CrossRef
Mendoza I, Villalobos D, Alexandrov BT. Crack propagation of Ti alloy via adiabatic shear bands. Mater Sci Eng A. 2015;645:306. CrossRef
Joshi S, Pawar P, Tewari A, Joshi SS. Influence of β phase fraction on deformation of grains in and around shear bands in machining of titanium alloys. Mater Sci Eng A. 2014;618:71. CrossRef
Zhan HY, Kent D, Wang G, Dargusch MS. The dynamic response of a β titanium alloy to high strain rates and elevated temperatures. Mater Sci Eng A. 2014;607:417. CrossRef
Zhan HY, Zeng WD, Wang G, Kent D, Dargusch MS. Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures. Mater Charact. 2015;102:103. CrossRef
Sun JL, Trimby PW, Yan FK, Liao XZ, Tao NR, Wang JT. Shear banding in commercial pure titanium deformed by dynamic compression. Acta Mater. 2014;79:47. CrossRef
Wang BF, Sun JY, Wang XY, Fu A. Adiabatic shear localization in a near beta Ti-5Al-5Mo-5V-1Cr-1Fe alloy. Mater Sci Eng A. 2015;639:526. CrossRef
Jiang YH, Chen ZY, Zhan CK, Chen T, Wang RK, Liu CM. Adiabatic shear localization in pure titanium deformed by dynamic loading: Microstructure and microtexture characteristic. Mater Sci Eng A. 2015;640:436. CrossRef
Liu JT, Fan QB, Cai HN, Wang FC. Underlying mechanism of periodical adiabatic shear bands generated in Ti–6Al–4V target by projectile impact. Mater Des. 2015;87:231.
Ge CJ, Li MQ. Adiabatic shear band of TC4 alloy during warm compression. Rare Metal Mater Eng. 2014;43(9):2069. CrossRef
Zheng C, Wang FC, Cheng XW, Liu JX, Liu TT, Zhu ZX, Yang KW, Peng MQ, Jin D. Capturing of the propagating processes of adiabatic shear band in Ti–6Al–4V alloys under dynamic compression. Mater Sci Eng A. 2016;658:60. CrossRef
Mungi MP, Rasane SD, Dixit PM. Residual stresses in cold axisymmetric forging. J Mater Process Technol. 2003;142(1):256. CrossRef
Venugopal S, Venugopal P, Mannan SL. Optimisation of cold and warm workability of commercially pure titanium using dynamic materials model (DMM) instability maps. J Mater Process Technol. 2008;202(1–3):201. CrossRef
Zhang ZG, Wu GQ, Song H, Cui D, Huang Z. Relationships between microstructure and mechanical properties of Ti-3Al-5Mo-5V alloy. Mater Sci Eng, A. 2008;487(1–2):488. CrossRef
Luo J, Gao J, Li L, Li MQ. The flow behavior and the deformation mechanisms of Ti-6Al-2Zr-2Sn-1.5Cr-2Nb alloy during isothermal compression. J Alloys Compd. 2016;667:44. CrossRef
Nesterenko VF, Meyers MA, LaSalvia JC, Bondar MP, Chen YJ, Lukyanov YL. Shear localization and recrystallization in high-strain, high-strain-rate deformation of tantalum. Mater Sci Eng A. 1997;229(1–2):23. CrossRef
- Formation of adiabatic shear band and deformation mechanisms during warm compression of Ti–6Al–4V alloy
- Nonferrous Metals Society of China
in-adhesives, MKVS, Neuer Inhalt/© Zühlke, Hellmich GmbH/© Hellmich GmbH, Neuer Inhalt/© momius | stock.adobe.com