Skip to main content

2020 | OriginalPaper | Buchkapitel

6. Friction Stir Processing Technology: A Case Study

verfasst von : Esther Titilayo Akinlabi, Rasheedat Modupe Mahamood

Erschienen in: Solid-State Welding: Friction and Friction Stir Welding Processes

Verlag: Springer International Publishing

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In this chapter, a case study is presented of friction stir processing (FSP) employed to process pure aluminium—AA1050. The microstructural evolution was investigated using Optical Microscope (OM) as well as Scanning Electron Microscope (SEM). Tensile behaviours of the Friction Stir Processed (FSPed) AA1050 samples were examined and the fractography of the fracture surfaces was also studied. The results show via macrograph that FSPed AA1050 samples were defect free and the most refined zone was the heat-affected zone (HAZ) with an average grain size of 6.77 µm while the grain sizes of stir zone (SZ) and thermo-mechanically HAZ (THAZ) were 8.47 and 7.34 µm respectively.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
2.
Zurück zum Zitat A.A. Cerit, M.B. Karamiş, N. Fehmi, Y. Kemal, Effect of reinforcement particle size and volume fraction on wear behaviour of metal matrix composites. Tribol. Ind. 30, 31–36 (2008) A.A. Cerit, M.B. Karamiş, N. Fehmi, Y. Kemal, Effect of reinforcement particle size and volume fraction on wear behaviour of metal matrix composites. Tribol. Ind. 30, 31–36 (2008)
3.
Zurück zum Zitat N. Sun, D. Apelian, Friction stir processing of aluminum cast alloys for high performance applications. Alum. Form. 44–50 (2011)CrossRef N. Sun, D. Apelian, Friction stir processing of aluminum cast alloys for high performance applications. Alum. Form. 44–50 (2011)CrossRef
6.
Zurück zum Zitat T. Navaneethakrishnan, P. Ganesh, Effect of welding parameters on friction stir welded dissimilar aluminum alloys 7075 and 6082 with various tool pin profiles. J. Chem. Pharm. Sci. 2015, 463–468 (April 2015) T. Navaneethakrishnan, P. Ganesh, Effect of welding parameters on friction stir welded dissimilar aluminum alloys 7075 and 6082 with various tool pin profiles. J. Chem. Pharm. Sci. 2015, 463–468 (April 2015)
7.
Zurück zum Zitat A. Adetunla, E. Akinlabi, Significantly improved mechanical properties of 1100 aluminium alloy via particle reinforcement, in 5th International Conference Innovation Science Technology, Barcelona, Spain, pp. 79–87 (2018) A. Adetunla, E. Akinlabi, Significantly improved mechanical properties of 1100 aluminium alloy via particle reinforcement, in 5th International Conference Innovation Science Technology, Barcelona, Spain, pp. 79–87 (2018)
15.
Zurück zum Zitat O.M. Ikumapayi, E.T. Akinlabi, Efficacy of α-β grade titanium alloy powder (Ti–6Al–2Sn–2Zr–2Mo–2Cr–0.25Si) in surface modification and corrosion mitigation in 3.5% NaCl on friction stir processed armour grade 7075-T651 aluminum alloys—insight in defence applications. Mater. Res. Express. 2019 (2019). https://doi.org/10.1088/2053-1591/ab1566CrossRef O.M. Ikumapayi, E.T. Akinlabi, Efficacy of α-β grade titanium alloy powder (Ti–6Al–2Sn–2Zr–2Mo–2Cr–0.25Si) in surface modification and corrosion mitigation in 3.5% NaCl on friction stir processed armour grade 7075-T651 aluminum alloys—insight in defence applications. Mater. Res. Express. 2019 (2019). https://​doi.​org/​10.​1088/​2053-1591/​ab1566CrossRef
16.
Zurück zum Zitat N. Gangil, S. Maheshwari, A.N. Siddiquee, Surface nanocomposite fabrication on AA6063 aluminium alloy using friction stir processing: an investigation into the effect of the tool-shoulder diameter on the composite microstructure. Mater. Tehnolnol. 52, 77–82 (2018). https://doi.org/10.17222/mit.2017.172CrossRef N. Gangil, S. Maheshwari, A.N. Siddiquee, Surface nanocomposite fabrication on AA6063 aluminium alloy using friction stir processing: an investigation into the effect of the tool-shoulder diameter on the composite microstructure. Mater. Tehnolnol. 52, 77–82 (2018). https://​doi.​org/​10.​17222/​mit.​2017.​172CrossRef
21.
Zurück zum Zitat A. Bawdekar, S. Singh, Surface hardening and microstructural evolution of high carbon steel by friction stir processing. Int. J. Mech. Prod. Eng. Res. Dev. 7, 343–354 (2017) A. Bawdekar, S. Singh, Surface hardening and microstructural evolution of high carbon steel by friction stir processing. Int. J. Mech. Prod. Eng. Res. Dev. 7, 343–354 (2017)
24.
Zurück zum Zitat K. Kumar, P. Gulati, A. Gupta, D.K. Shukla, A review of friction stir processing of aluminium alloys using different types of reinforcements. Int. J. Mech. Eng. Technol. 8, 1638–1651 (2017) K. Kumar, P. Gulati, A. Gupta, D.K. Shukla, A review of friction stir processing of aluminium alloys using different types of reinforcements. Int. J. Mech. Eng. Technol. 8, 1638–1651 (2017)
28.
Zurück zum Zitat O.M. Ikumapayi, E.T. Akinlabi, J.D. Majumdar, Review on thermal, thermo-mechanical and thermal stress distribution during friction stir welding. Int. J. Mech. Eng. Technol. 9, 534–548 (2018) O.M. Ikumapayi, E.T. Akinlabi, J.D. Majumdar, Review on thermal, thermo-mechanical and thermal stress distribution during friction stir welding. Int. J. Mech. Eng. Technol. 9, 534–548 (2018)
29.
Zurück zum Zitat O.M. Ikumapayi, E.T. Akinlabi, A comparative assessment of tensile strength and corrosion protection in friction stir processed AA7075-T651 matrix composites using fly ashes nanoparticles as reinforcement inhibitors in 3.5% NaCl. Int. J. Mech. Prod. Eng. Res. Dev. 9, 839–854 (2019). https://doi.org/10.24247/ijmperdjun201992 O.M. Ikumapayi, E.T. Akinlabi, A comparative assessment of tensile strength and corrosion protection in friction stir processed AA7075-T651 matrix composites using fly ashes nanoparticles as reinforcement inhibitors in 3.5% NaCl. Int. J. Mech. Prod. Eng. Res. Dev. 9, 839–854 (2019). https://​doi.​org/​10.​24247/​ijmperdjun201992​
30.
Zurück zum Zitat A.S. Kumar, V. Praveen, A review on aluminium based metal matrix composites by friction stir processing. Int. J. Eng. Manuf. Sci. 7, 203–224 (2017) A.S. Kumar, V. Praveen, A review on aluminium based metal matrix composites by friction stir processing. Int. J. Eng. Manuf. Sci. 7, 203–224 (2017)
43.
Zurück zum Zitat X.W. Yang, T. Fu, W.Y. Li, Friction stir spot welding: a review on joint macro-and microstructure, property, and process modelling. Adv. Mater. Sci. Eng. 2014, 1–11 (2014) X.W. Yang, T. Fu, W.Y. Li, Friction stir spot welding: a review on joint macro-and microstructure, property, and process modelling. Adv. Mater. Sci. Eng. 2014, 1–11 (2014)
45.
Zurück zum Zitat O.O. Abegunde, E.T. Akinlabi, D.M. Madyira, Force feedback analysis: friction stir welding of aluminium metal matrix composite. Lect. Notes Eng. Comput. Sci. 2224, 1–6 (2016) O.O. Abegunde, E.T. Akinlabi, D.M. Madyira, Force feedback analysis: friction stir welding of aluminium metal matrix composite. Lect. Notes Eng. Comput. Sci. 2224, 1–6 (2016)
49.
Zurück zum Zitat T.K. Bhattacharya, H. Das, T.K. Pal, Influence of welding parameters on material flow, mechanical property and intermetallic characterization of friction stir welded AA6063 to HCP copper dissimilar butt joint without offset. Trans. Nonfer. Met. Soc. China (English Ed) 25, 2833–2846 (2015). https://doi.org/10.1016/s1003-6326(15)63909-7CrossRef T.K. Bhattacharya, H. Das, T.K. Pal, Influence of welding parameters on material flow, mechanical property and intermetallic characterization of friction stir welded AA6063 to HCP copper dissimilar butt joint without offset. Trans. Nonfer. Met. Soc. China (English Ed) 25, 2833–2846 (2015). https://​doi.​org/​10.​1016/​s1003-6326(15)63909-7CrossRef
Metadaten
Titel
Friction Stir Processing Technology: A Case Study
verfasst von
Esther Titilayo Akinlabi
Rasheedat Modupe Mahamood
Copyright-Jahr
2020
DOI
https://doi.org/10.1007/978-3-030-37015-2_6

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.