nach oben

Erschienen in:

29.09.2022

Granulometric Analysis of Powder Materials Used for Producing Samples by Method of Selective Laser Melting

verfasst von: A. L. Galinovsky, I. N. Kravchenko, D. A. Martysyuk, E. V. Seliverstova, S. N. Sinavchian, V. V. Pirogov, A. D. Bykova

Erschienen in: Metallurgist | Ausgabe 5-6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper discusses the aspects of granulometric and morphological analysis of powders used in the technology of selective laser melting. Studies have been carried out to obtain statistical data concerning the particle size distribution, as well as their integral and differential distribution. The aspects of independent significance in this work had to do with identifying the morphological features of the particles. Experimental studies were carried out using certified and validated equipment. Conclusions were drawn about the specific features of the analyzed powders, and directions for further research were proposed, including the formation of databases of powder materials, which can be of value to process engineers who use additive technologies in practice.

Vorheriger Artikel Technology for Producing Aluminum-Matrix Composite Material Reinforced with Multi-Wall Carbon Nanotubes

Nächster Artikel Use of Solid Slag Mixtures in a Ladle Furnace Unit

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. I. Khaimovich, V. G. Smelov, V. V. Kokareva, and A. V. Sotov, “Quality management system for the technologies of selective laser fusion of domestic powder compositions,” Izv. Samarsk. Nauch. Tsentra RAN, 20, No. 6 (86), 33–40 (2018).

A. I. Khaimovich, I. S. Stepanenko, and V. G. Smelov, “Optimization of selective laser melting by evaluation method of multiple quality characteristics,” IOP Conf. Series: Mater. Sci. and Eng. “2017 Inter. Conf. on Aerospace Technology, Communications and Energy Systems, ATCES 2017,” 012067 (2018); DOI: 10.1088/1757-899X/302/1/012067.

T. V. Tarasova, P. A. Podrabinnik, and A. A. Filatova, Particle Size Analysis of Powder Materials for Additive Production [in Russian], Izd. MGTU (STANKIN) (2017).

I. N. Kravchenko, D. T. Abdumuminova, and T. A. Chekha, “Research and development of the process for producing powders of a given particle size for plasma coatings,” in: New Materials, Approaches and Technologies for the Design, Production and Operation of Rocket Space Equipment [in Russian], Izd. MGTU im. Baumana, Moscow (2020), pp. 184–187.

Y. Zhang, J. C. Outeiro, and T. Mabrouki, “On the selection of Johnson-Cook constitutive model parameters for Ti–6Al–4V using three types of numerical models of orthogonal cutting,” Procedia CIRP, 31, 112–117 (2015); DOI: https://doi.org/10.1016/j.procir.2015.03.052.CrossRef

V. S. Glazunov and M. V. Cherepanova, “The use of additive technologies in the manufacturing of ceramic products,” Vesti Perm. Nats. Issled. Politekh. Univ., No. 4, 174–187 (2018); DOI: https://doi.org/10.15593/2224-9400/2018.4.14.

K. Liu, H. Sun, Y. Tan, Y. Shi, J. Liu, S. Zhang, and S. Huang, “Additive manufacturing of traditional ceramic powder via selective laser sintering with cold isostatic pressing,” Inter. J. Adv. Manuf. Technol., No. 3, 945–952 (2017); DOI: https://doi.org/10.1007/s00170-016-9441-3.

S. N. Perevislov, “Structure, properties, and applications of graphite-like hexagonal boron nitride,” Refractories and Industrial Ceramics, 60, 3, 291–295 (2019); DOI: https://doi.org/10.1007/s11148-019-00355-5.CrossRef

D. D. Nesmelov, O. A. Kozhevnikov, S. S. Ordan’yan, et al., “Precipitation of the eutectic Al₂O₃–ZrO₂(Y₂O₃) on the surface of SiC particles,” Glass and Ceramics, 74, No. 1, 43–47 (2017); DOI: https://doi.org/10.1007/s10717-017-9925-0.

10.

M. A. Markov, A. V. Krasikov, A. D. Bykova, et al., “Preparation of MoSi₂–SiC–ZrB₂ structural ceramics by free sintering,” Refractories and Industrial Ceramics, 60, No. 4, 385–388 (2019); DOI: https://doi.org/10.1007/s11148-019-00372-4.CrossRef

11.

I. A. Zhukov, P. Y. Nikitin, A. B. Vorozhtsov, et al., “The use of intermetallic Al_xMg_y powder to obtain AlMgB14-based materials,” Materials Today Communications, 22, 100848 (2020); DOI: https://doi.org/10.1016/j.mtcomm.2019.100848.CrossRef

12.

X. Li, Modeling and Simulation of Grinding Processes Based on a Virtual Wheel Model and Microscopic Interaction Analysis, Worcester, U. S. (2010).

13.

A. V. Sergeevichev and A. A. Fedyaev, “Statistical multifaceted model of abrasive grain,” Sistemy. Metody. Tekhnologii, No. 3 (31), 99–106 (2016).

14.

A. Domiaty and A. Abdel-Rahman, “Fracture mechanics-based model of abrasive waterjet cutting for brittle materials,” Inter. J. of Advanced Manufacturing Technol., 13, Issue 3, 172–181 (1997).CrossRef

15.

P. Klapetek, I. Ohlídal, D. Franta, et al., “Atomic force microscopy characterization of ZnTe epitaxial films,” Japanese J. of Applied Physics, 42, No. 7B, 4706–4709 (2003); DOI: https://doi.org/10.1143/JJAP.42.4706.CrossRef

16.

O. V. Yegorova, Technical Microscopy. Practice of Using Microscopes for Technical Purposes. Being “on First-name Terms” with a Microscope [in Russian], Tekhnosfera, Moscow (2007).

17.

N. N. Gavrilova, V. V. Nazarov, and O. V. Yarovaya, Microscopic Methods for Determining the Size of Dispersed Material Particles [in Russian], Izd. RKhTU im. D. I. Mendeleeva (2012).

18.

H. K. Tönshoff, M. Jung, S. Männel, and W. Rietz, “Using acoustic emission signals for monitoring of production process,” Ultrasonics, 37, 681–686 (2000).CrossRef

19.

V. A. Naumov, “Dependence of the force of hydrodynamic resistance of solid particles on their aspheric parameter,” Vestnik Nauki i Obrazovaniya Severo-Zapada Rossii, 1, No. 1, 95–104 (2015).

20.

G. Guerrini, A. Fortunato, A. A. Bruzzone, and D. M. Daddona, “Abrasive grains micro geometry: A comparison between two acquisition methods,” Procedia CIRP, No. 67, 302–306 (2018); DOI: https://doi.org/10.1016/j.procir.2017.12.217.CrossRef

21.

W. Kapłonek and K. Nadolny, “Review of the advanced microscopy techniques used for diagnostics of grinding wheels with ceramic bond,” J. of Machine Eng., 12, No. 4, 81–98 (2012).

22.

S. A. Voronov and W. Ma, “The effect of the abrasive grain geometry on cutting forces during polishing,” Vestnik MGTU im. N. E. Baumana, Ser. Mashinostroyeniye, No. 5, 52–63 (2017).

23.

S. Malkin and C. Guo, Grinding Technology: Theory and Applications of Machining with Abrasives, Industrial Press Publ., New York (2008).

24.

A. A. Barzov and A. L. Galinovsky, Material Ultra Blasting Treatment and Diagnostic Technologies [in Russian], Izd. MGTU im. N. E. Baumana, Moscow (2009).

25.

E. J. Lee, H. J. Hwang, W. G. Lee, K. H. Cho, and H. Jang, “Morphology and toughness of abrasive particles and their effects on the friction and wear of friction materials: A case study with zircon and quartz,” Tribology Letters, 37, No. 3, 637–644 (2010); DOI: https://doi.org/10.1007/s11249-009-9561-0.CrossRef

Titel: Granulometric Analysis of Powder Materials Used for Producing Samples by Method of Selective Laser Melting
verfasst von: A. L. Galinovsky
I. N. Kravchenko
D. A. Martysyuk
E. V. Seliverstova
S. N. Sinavchian
V. V. Pirogov
A. D. Bykova
Publikationsdatum: 29.09.2022
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 5-6/2022
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-022-01377-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5-6/2022

Investigating the Effectiveness of Roll Lubricants in Cold Rolling of Copper Bands in Industrial Two-High Rolling Mill 175 × 300

Simulation of the Heat-Transfer Conditions in a CCM Mold

Tekhnogen-Invest Software Program for Assessing the Effectiveness of Recycling Techogenic Formations of the Ferroalloy Production. Part 2

Influence of Tool Steel Chemical Composition on Structure and Phase Composition of a Diffusion Layer after Microarc Boriding

Improvements to Electromagnetic Stirring Systems for Billet and Bloom Continuous Casting Machines. Part 1

Increasing Die Life During Die Forging by Means of QForm Modeling

Premium Partner

Marktübersichten