nach oben

Erschienen in:

2018 | OriginalPaper | Buchkapitel

1. Green Fluids from Vegetable Oil: Power Plant

verfasst von : Dhorali Gnanasekaran, Venkata Prasad Chavidi

Erschienen in: Vegetable Oil based Bio-lubricants and Transformer Fluids

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Biodegradability has become one of the most important design parameters both in the selection of base oil and in the overall formulation of the finished fluids for insulating liquid and lubricants at electrical power generation in the power plants. There is a continuing trend toward the use of “environmentally friendly” or more readily biodegradable fluids. Readily biodegradable fluids are one that breaks down in the environment at a specified time when evaluated by standard biodegradability tests; the fluids convert to lower molecular weight components that have essentially no environmental impact. Due to the depleting of petroleum resources and environmental concern, the demand for vegetable oil-based natural esters has increased as well. In this regard, the statistical development, degradation capability of vegetable oil (triglycerides) as lubricants and liquid insulators, and the properties of natural ester-based vegetable oil in the power plant have been investigated in this chapter.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Biodegradable, Renewable, and Eco-friendly Vegetable Oil: Lubricants

Rizvi SQ (2009) Lubricant additives. In: A comprehensive review of lubricant chemistry, technology, selection, and design. ASTM International, West ConshohockenCrossRef

Betton CI (2010) Lubricants & their environmental impact. In: Mortier RM, Fox MF, Orszulik ST (eds) Chemistry and technology of lubricants. Springer, Dordrecht, pp 435–457

Pettersson A (2007) High-performance base fluids for environmentally adapted lubricants. Tribol Int 40(4):638–645CrossRef

Abdel-Azim AAA, Nassar AM, Ahmed NS, Kamal RS (2006) Preparation and evaluation of acrylate polymers as pour point depressants for lube oil. Pet Sci Technol 24(8):887–894CrossRef

Ghosh P, Das M, Upadhyay M, Das T, Mandal A (2011) Synthesis and evaluation of acrylate polymers in lubricating oil. J Chem Eng Data 56:3752–3758CrossRef

Wu X, Zhang X, Yang S, Chen H, Wang D (2000) The study of epoxidized rapeseed oil used as a potential biodegradable lubricant. J Am Oil Chem Soc 77:561–563CrossRef

(a). Sharma BK, Adhvaryu A, Erhan SZ (2006) Synthesis of hydroxyl thio-ether derivatives of vegetable oil. J Agric Food Chem 54(26):9866–9872. (b). Mohammed Aji, Shettima Abba Kyari, Gideon Zoaka (2015) Comparative Studies between bio lubricants from Jatropha, neem oil and mineral lubricant (Engen Super 20w/50). Appli Rese J 1(4):252–257

Maleque MA, Masjuki HH, Sapuan SM (2003) Vegetable-based biodegradable lubricating oil additives. Ind Lubr Tribol 55(3):137–143CrossRef

Ertugrul D, Filiz K (2004) Using cotton seed oil as environmentally accepted lubricant additive. Energy Sources 26:611–625CrossRef

10.

Kammann KP Jr, Phillips AI (1985) Sulfurized vegetable oil products as lubricant additives. J Am Oil Chem Soc 62:917–923CrossRef

11.

Fuks IG, Evdokimov AY, Dzhamalov AA, Luksa A (1992) Vegetable oils and animal fats as raw materials for the manufacture of commercial lubricants. Chem Technol Fuels Oils 28(4):230–237CrossRef

12.

Sharma BK, Adhvaryu A, Erhan SZ (2006) Synthesis of hydroxyl thio-ether derivatives of vegetable oil. J Agric Food Chem 54(26):9866–9872CrossRef

13.

Ghosh P, Karmakar G (2013) Green additives for lubricating oils. ACS Sustain Chem Eng 1(11):1364–1370CrossRef

14.

Biresaw G, Asadauskas SJ, McClure TG (2012) Polysulfide and biobased extreme pressure additive performance in vegetable vs paraffinic oils. Ind Eng Chem Res 51:262–273CrossRef

15.

Papay AG (1998) Antiwear and extreme pressure additives in lubricants. Lubr Sci 10(3):209–224CrossRef

16.

Chin-Chung W, Lee-Yan S, Haw-Wen C (2001) Differential effects of garlic oil and its three major organosulfur components on the hepatic detoxification system in rats. J Agric Food Chem 50(2):378–383

17.

Weinberg DS, Manier ML, Richardson MD, Haibach FG (1993) Identification and quantification of organosulfur compliance markers in a garlic extract. J Agric Food Chem 41(1):37–41CrossRef

18.

Braun E, Buyanovskii I, Pravotorova E (2007) Reduction of amount of tribotests of lubricants with four-ball machine. J Frict Wear 28(3):300–305CrossRef

19.

a. Thomas R, Achim F (2009) Sulfur carriers. In: Rudnick LR (ed) Lubricant additives: chemistry and applications. CRC Press, Boca Raton. b. Imran A, Masjuki HH, Kalam MA, Varman M, Hasmelidin M, Al Mahmud KAH, Shahir SA, Habibullah M (2013) Study of friction and wear characteristic of Jatropha oil blended lube oil. Procedia Eng 68:178–185

20.

Li W, Jiang C, Chao M, Wang X (2014) Natural garlic oil as a high performance, environmentally friendly, extreme pressure additive in lubricating oils. ACS Sustain Chem Eng 2:798–803CrossRef

21.

Studt P (1989) Boundary lubrication: adsorption of oil additives on steel and ceramic surfaces and its influence on friction and wear. Tribol Int 22:111–119CrossRef

22.

Daniel SG (1951) The adsorption on metal surfaces of long-chain polar compounds from hydrocarbon solutions. Trans Faraday Soc 47:1345–1359CrossRef

23.

(a). Kipling JJ (1965) Adsorption from solutions of non-electrolytes. Academic Press, London, p 55. (b). Bowman WF, Stachowiak GW (1999) Application of sealed capsule differential scanning calorimetry - part II: assessing the performance of antioxidants and base oils. Lubr Eng 55(5):22–9

24.

Hironaka S, Yahagi Y, Sakurai T (1975) Heats of adsorption and anti-wear properties of some surface active substance. Bull Jpn Petrol Inst 17(2):201–205CrossRef

25.

Jahanmir S, Beltzer M (1986) An adsorption model for friction in boundary lubrication. ASLE Trans 29(3):423–430CrossRef

26.

Nakayama K, Studt P (1991) Additive interaction and lubrication performance in polar additive binary system. Tribol Int 25:2

27.

Arnsek A, Vizintin J (1999) Scuffing and load capacity of rapeseed-based oils. Lubr Eng 55:11–18

28.

Gunsel S, Lockwood FE (1995) The influence of copper-containing additives on oil oxidation and corrosion. Tribol Trans 38:485–496CrossRef

29.

Bob F, Dwight S (2010) The benefits of bio-based lubricants. Available in pdf from Gear Solutions: http://www.gearsolutions.com/article/detail/5990/the-benefits-of-bio-based-lubricants

30.

Bakunin VN, Yu Suslov A, Kuzmina GN, Parenago OP, Topchiev AV (2004) Synthesis and application of inorganic nanoparticles as lubricant components – a review, Institute of Petrochemical Synthesis RAS, Moscow, Russia. J Nanopart Res 6:273–284CrossRef

31.

Choi SUS (1995) Enhancing thermal conductivity of fluids with nanoparticles. In: Siginer DA, Wang HP (eds) Developments and applications of non-Newtonian flows. ASME, New York, pp 99–105

32.

(a). Ji X, Chen Y, Zhao G, Wang X, Liu W (2011) Tribological properties of CaCO nanoparticles as an additive in lithium grease. Tribol. Lett 41:113–119. (b). Friedman H, Eidelman O, Feldman Y, Moshkovich A, Perfiliev V, Rapoport L, Cohen H, Yoffe A, Tenne R (2007) Fabrication of self-lubricating cobalt coatings on metal surfaces. Nanotechnol 18 doi:10.1088/0957-4484/18/11/115703

33.

Chaudhury MK (2003) Complex fluids: spread word about nanofluids. Nature 423:131–132CrossRef

34.

Kleinstreuer C, Li J, Koo J (2008) Microfluidics of nano-drug delivery. Int J Heat Mass Transf 51:5590–5597CrossRefMATH

35.

(a). Rapoport L, Fleischer N, Tenne R (2003) Fullerene-like WS nanoparticles: superior lubricants for harsh conditions. Adv Mater 15:651–655. (b). Cumings J, Zettl A (2000) Low-friction nanoscale linear bearing realized from multiwall carbon nanotubes. Sci 289:602–604. (c). Falvo MR, Taylor RM, Helser A, Chi V, Brooks FP Jr, Washburn S, Superfine R (1999) Nanometre-scale rolling and sliding of carbon nanotubes. Nature 397:236–238. (d) Akbulut M, Belman N, Golan Y, Israelachvili J (2006) Frictional properties of confined nanorods. Adv Mater 18:2589–2592

36.

Salimon J, Salih N, Yousif E (2010) Biolubricants: raw materials, chemical modifications, and environmental benefits. Eur J Lipid Sci Technol 112(5):519–530

37.

Hahn S, Dott W, Eisentraeger A (2006) Characterization of aging behavior of environmentally acceptable lubricants based on trimethylolpropane esters. J Synth Lubr 23(4):223–236CrossRef

38.

Pettersson A (2003) Tribological characterization of environmentally adapted ester based fluids. Tribol Int 36(11):815–820CrossRef

39.

Hashem AI, Abou Elmagd WSI, Salem AE, El-Kasaby M, El-Nahas AM (2013) Conversion of some vegetable oils into synthetic lubricants. Energy Sources, Part A 35(5):397–400CrossRef

40.

(a). Fox NJ, Stachowiak GW (2007) Vegetable oil-based lubricants, a review of oxidation. Tribol Int 40(7):1035–1046. (b). Steve B (2002) Green lubricants. Environ Benefits Impacts Lubr Green Chem 4:293–307

41.

Erhan SZ, Sharma BK, Liu Z, Adhvaryu A (2008) Lubricant base stock potential of chemically modified vegetable oils. J Agric Food Chem 56(19):8919–8925CrossRef

42.

(a). Erhan SZ, Asadauskas S (2000) Lubricant base stocks from vegetable oils. Ind Crops Prod 11(2–3):277–282. (b). Syaima MTS, Zamratul MIM, Noor IM, Rifdi WMWT (2014) Development of bio-lubricant from Jatropha curcas oils. IJRCMCE 1:10–12

43.

Shashidhara YM, Jayaram SR (2010) Vegetable oils as a potential cutting fluid-an evolution. Tribol Int 43(5–6):1073–1081CrossRef

44.

Sharma BK, Liu Z, Adhvaryu A, Erhan SZ (2008) One-pot synthesis of chemically modified vegetable oils. J Agric Food Chem 56(9):3049–3056CrossRef

45.

Campanella A, Rustoy E, Baldessari A, Baltanás MA (2010) Lubricants from chemically modified vegetable oils. Bioresour Technol 101(1):245–254CrossRef

46.

Ozcelik B, Kuram E, Cetin MH, Demirbas E (2011) Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L. Tribol Int 44(12):1864–1871CrossRef

47.

Li W, Wu Y, Wang X, Liu W (2012) Tribological study of boron containing soybean lecithin as an environmentally friendly lubricant additive in synthetic base fluids. Tribol Lett 47(3):381–388CrossRef

48.

(a). Mohanti S (2001) Envirotech New Delhi www.envirotechindia.in/ (b). Amit Suhane, Sarviya RM, Rehman A, Khaira HK (2014) Prospects of vegetable oils for lubricant formulations in Indian perspectives. IJETR 2(12):2321–0869

49.

Gawrilow I (2004) Vegetable oil usage in lubricants. Oleochem Inform 15:702–705

50.

Sharma BK, Adhvaryua A, Liu Z, Erhan SZ (2006) Chemical modification of vegetable oils for lubricant applications. J Am Oil Chem Soc 83:129–136CrossRef

51.

Soni S, Agarwal M (2014) Lubricants from renewable energy sources – a review. Green Chem Lett Rev 7:359–382CrossRef

52.

Nagendramma P, Kaul S (2012) Development of ecofriendly/biodegradable lubricants: an overview. Renew Sustain Energy Rev 16:764–774CrossRef

53.

Padmaja KV, Rao BVSK, Reddy RK, Bhaskar PS, Singh AK, Prasad RBN (2012) Undecenoic acid-based polyol esters as potential lubricant base stocks. Ind Crop Prod 35:237–240CrossRef

54.

Arumugam S, Sriram G, Subhadra L (2012) Synthesis, chemical modification and tribological evaluation of plant oil as bio-degradable low temperature lubricant. Procedia Eng 38:1508–1517CrossRef

55.

Quinchia LA, Reddyhoff T, Delgado MA, Gallegos C, Spikes HA (2014) Tribological studies of potential vegetable oil-based lubricants containing environmentally friendly viscosity modifiers. Tribol Int 69:110–117CrossRef

56.

Singh AK (2011) Castor oil-based lubricant reduces smoke emission in two-stroke engines. Ind Crop Prod 33:287–295CrossRef

57.

Quinchia LA, Delgado MA, Valencia C, Franco JM, Gallegos C (2010) Viscosity modification of different vegetable oils with EVA copolymer for lubricant applications. Ind Crop Prod 32:245–254CrossRef

58.

(a). Campanella A, Rustoy E, Baldessari A, Baltanas MA (2010) Lubricants from chemically modified vegetable oils. Ind Crops Prod 101:245–254. (b). Bilal S, Mohammed-Dabo IA, Nuhu M, Kasim SA, Almustapha IH, Yamusa YA (2013) Production of biolubricant from Jatropha curcas seed oil. J Chem Eng Mater Sci 4:72–79

59.

Gunderson RC, Hart AW (eds) (1962) Synthetic lubricants. Reinhold, New York

60.

Randles SJ (1999) Esters. In: Rudnick LR, Shubkin RL (eds) Synthetic lubricants and high-performance functional fluids. Marcel Dekker, New York, pp 63–102CrossRef

61.

Lathi P, Mattiasson M (2007) Green approach for the preparation of biodegradable lubricant base stock from epoxidized vegetable oil. Appl Catal B 9:207–212CrossRef

62.

Jayadas N, Nair K (2006) Coconut oil as a base oil for industrial lubricants-evaluation and modification of thermal, oxidative and low-temperature properties. Tribol Int 39:873–878CrossRef

63.

Lawal SA (2013) A review of application of vegetable oil-based cutting fluids in machining non-ferrous metals. Indian J Sci Technol 6:3951–3956

64.

Rudnick LR (2006) Synthetics, mineral oils, and bio-based lubricants: chemistry and technology. CRC/Taylor & Francis Group, New York

65.

Lazzeri L, Mazzoncini M, Rossi A, Balducci E, Bartolini G, Giovannelli L, Pedriali R, Petroselli R, Patalano G, Agnoletti G, Borgioli A, Croce B, Avino LD (2006) Biolubricants for the textile and tannery industries as an alternative to conventional mineral oils: an application experience in the Tuscany province. Ind Crop Prod 24:280–291CrossRef

66.

Dietrich H (2002) Recent trends in environmentally friendly lubricants. J Synth Lubr 18:328–347

67.

Liew Yun Hsien W (2015) Towards green lubrication in machining, springer briefs in green chemistry for sustainability. Springer, Malaysia

68.

Samarth NB, Mahanwar PA (2015) Modified vegetable oil-based additives as a future polymeric material-review. Open J Organic Polym Mater 5:1–22CrossRef

69.

Bartz WJ (1998) Lubricants and the environment. Tribol Int 31:35–47CrossRef

70.

Bartz WJ (2006) Ecotribology: environmentally acceptable tribological practices. Tribol Int 39:728–733CrossRef

71.

Fox NJ, Stachowiak GW (2007) Vegetable oil-based lubricants - a review of oxidation. Tribol Int 40:1035–1046CrossRef

72.

Joseph PV, Deepak S, Sharma DK (2007) Study of some non-edible vegetable oils of Indian origin for lubricant application. J Synth Lubr 24:181–197CrossRef

73.

Goyan RL, Melley RE, Wissner PA, Ong WC (1998) Biodegradable lubricants. Lubr Eng 54(7):10–17

74.

Chauhan PS, Chhibber VK (2013) Non-edible oil as a source of bio-lubricant for industrial applications: a review. Inter J Eng Sci Innov Technol 2(1):299–306

75.

Lea CW (2002) European development of lubricants from renewable sources. Ind Lubr Tribol 54(6):268–274CrossRef

76.

Asadauskas S, Perez JH, Duda JL (1997) Lubrication properties of castor oil–potential base stock for biodegradable. Lubr Eng 53(12):35–40

77.

Masjuki HH, Maleque MA, Kubo A, Nonaka T (1990) Palm oil and mineral oil based lubricants-their tribological and emission performance. Tribol Int 32:305–314CrossRef

78.

Maleque MA, Masjuki HH, Sapuan SM (2003) Vegetable based biodegradable lubricating oil additives. Ind Lubr technol 55(3):137–143CrossRef

79.

Erhan SZ, Asadauskas S (2000) Lubricant base stocks from vegetable oils. Ind Crop Prod 11:277–282CrossRef

80.

Bhatia VK, Chaudhry A, Sivasankaran GK, Bisht RPS, Kashyap M (1990) Modification of jojoba oil for lubricant formulations. JAOCS 67(1):1–7

81.

Belgacem MN, Gandini A (2008) In: Belgacem MN, Gandini A (eds) Monomers, polymers, and composites from renewable resources. Elsevier, Amsterdam, pp 39–66CrossRef

82.

Bertrand Y, Hoang LC (2003) Vegetal oils as a substitute for mineral oils. In: Proceedings of the 7th international conference on properties applications of dielectric materials, Nagoya

83.

Oommen TV, Claiborne CC, Walsh EJ, Baker JP (2000) A new vegetable oil based transformer fluid: development and verification, Electrical Insulation and Dielectric Phenomena, Annual Report Conference on, vol. 1. Victoria, pp 308–312

84.

Oommen TV, Claiborne CC, Walsh EJ, Baker JP (1999) Biodegradable transformer fluid from high oleic vegetable oils, International Conference of Doble Clients, 1999

85.

McShane P, Corkran J, Rapp K, Luksich J (2006) Natural ester dielectric fluid development, IEEE

86.

Bertrand Y, Hoang LC (2004) Vegetable oils as a substitute for mineral insulating oils in medium voltage equipment, CIGRE, paper D1–202

87.

Susilo A, Muslim J, Arief YZ, Muhamad NA, Hikita M, Kozako M, Tsuchie M, Suzuki T, Hatada S, Kanetani A, Kano T, Suwarno, Khayam U (2014) Comparative study of partial discharge characteristics and dissolved gas analysis on palm-based oil as insulating material. Power Engineering and Renewable Energy (ICPERE), International Conference on, Bali, pp 232–236

88.

Gómez NA, Wilhelm HM, Santos CC, Stocco GB (2014) Dissolved gas analysis (DGA) of natural ester insulating fluids with different chemical compositions. IEEE Trans Dielectr Electr Insul 21(3):1071–1078CrossRef

89.

Arief YZ, Ahmad MH, Lau KY, Muhamad NA, Bashir N, Mohd NK, Huey LW, Kiat YS, Azli SA (2014) A comparative study on the effect of electrical aging on electrical properties of palm fatty acid ester (PFAE) and FR3 as dielectric materials. In Conference Proceeding - IEEE International Conference on Power and Energy, PECon 2014. [7062427] Institute of Electrical and Electronics Engineers Inc, pp 128–133

90.

Villarroel R, García D, García B, Burgos J (2015) Moisture diffusion coefficients of transformer pressboard insulation impregnated with natural esters. IEEE Trans Dielectr Electr Insul 22(1):581–589CrossRef

91.

Yao S, Li J, Li L, Liao R, Zhou J (2014) Comparison analysis to thermal aging properties of vegetable and mineral insulating oils, High Voltage Engineering and Application (ICHVE), International Conference on, Poznan, 2014, pp 1–4

92.

Wang Z, Li J, Yang L, Liao R (2014) Characteristics of acid value in vegetable insulating oil during thermal aging, High Voltage Engineering and Application (ICHVE), International Conference on, Poznan, 2014, pp 1–4

93.

IEC 60422 Mineral insulating oils in electrical equipment supervision and maintenance guidance

94.

IEC 61203 synthetic organic esters for electrical purposes- Guide for maintenance of transformer esters in equipment

95.

D6871–03 (2008) Standard Specification for Natural (Vegetable Oil) Ester fluids Used in electrical apparatus

96.

IEC 60944 (Ed. 1) -1988 Guide for Acceptance of Silicone Transformer Fluid and Its Maintenance in Transformers

Titel: Green Fluids from Vegetable Oil: Power Plant
verfasst von: Dhorali Gnanasekaran
Venkata Prasad Chavidi
Verlag: Springer Singapore
Buch: Vegetable Oil based Bio-lubricants and Transformer Fluids
Print ISBN: 978-981-10-4869-2

Electronic ISBN: 978-981-10-4870-8

Copyright-Jahr: 2018
DOI: https://doi.org/10.1007/978-981-10-4870-8_1