Weitere Artikel dieser Ausgabe durch Wischen aufrufen
In this study, influence of different stone powders (SP), including limestone powders (LP), quartzite powders (QP), and granitic powders (GP), on the hydration behaviors of portland cement, for example, setting time, hydration heat, and hydration products, were discussed. The initial and the final setting time both shorten when the content of LP is 5 %, however, they are slightly delayed by the other two SPs. The LP has no obvious influence on the arrival time of the first peak in the exothermal curves, and it makes the peak value decrease; the other two SPs postpone the appearance of the first peak, and they also make the peak value decrease. For the second peak, LP shifts the peak position to the left, QP has no effect on this peak position, and GP makes the appearance of this peak delayed by 143 min. Similarly, three kinds of SPs have different influence on the hydration products of portland cement. The LP precipitates the formation of hydrated calcium carbo aluminate, the QP the formation of hydrated garnet, and the GP makes the amount of Tobermorite increase.
Bonavetti, V., Donza, H., Menéndez, G., Cabrera, O., & Irassar, E. F. (2003). Limestone filler cement in low w/c concrete: A rational use of energy. Cement and Concrete Research, 33(6), 865–871.
Bonavetti, V. L., & Irassar, E. F. (1994). The effect of stone dust content in sand. Cement and Concrete Research, 24(3), 580–590. CrossRef
Bonavetti, V. L., Rahhal, V. F., & Irassar, E. F. (2001). Studies on the carboaluminate formation in limestone filler-blended cements. Cement and Concrete Research, 31, 853–859. CrossRef
Gutteridge, W. A., & Dalziel, J. A. (1990). Filler cement: The effect of the secondary component on the hydration of Portland cement: Part I. A fine non-hydraulic filler. Cement and Concrete Research, 20(5), 778–782.
Kakali, G., Tsivilis, S., Aggeli, E., & Bati, M. (2000). Hydration products of C 3A, C 3S and portland cement in the presence of CaCO 3. Cement and Concrete Research, 30, 1073–1077. CrossRef
Kumar, A., Oey, T., Kim, S., Thomas, D., Badran, S., Li, J., et al. (2013a). Simple methods to estimate the influence of limestone fillers on reaction and property evolution in cementitious materials. Cement & Concrete Composites, 42, 20–29.
Kumar, A., Oey, T., Falla, G. P., Henkensiefken, R., Neithalath, N., & Sant, G. (2013b). A comparison of intergrinding and blending limestone on reaction and strength evolution in cementitious materials. Construction and Building Materials, 43, 428–435.
Li, B. X., Zhou, M.-K., Tian, J.-P., & Hu, X.-M. (2006). Effect of stone dust and fly ash on properties of C60 high performance concrete containing manufactured sand. Journal of Building Materials, 9(4), 381–387 (in Chinese).
Oey, T., Kumar, A., Bullard, J. W., & Neithalath, N. (2013). The filler effect: The influence of filler content and surface area on cementitious reaction rates. Journal of the American Ceramic Society, 96(6), 1987–1990.
Poppe, A.-M., & Schutter, G. D. (2005). Cement hydration in the presence of high filler contents. Cement and Concrete Research, 35(12), 2290–2299.
Runzhang, Y. (1996). Bonding materials science (in China). Wuhan, China: Wuhan University of Technology Press.
Soroka, I., & Stern, N. (1976). Calcareous fillers and the compressive strength of portland cement. Cement and Concrete Research, 6(3), 367–376. CrossRef
Zhou, M., Peng, S., Xu, J., & Zhu, C. (1996). Effect of stone powder on stone chippings concrete. Journal of Wuhan University of Technology (Materials Sciences Edition), 11(4), 29–34 (in Chinese).
- Hydration Behaviors of Portland Cement with Different Lithologic Stone Powders
- Korea Concrete Institute
International Journal of Concrete Structures and Materials
Print ISSN: 1976-0485
Elektronische ISSN: 2234-1315