Skip to main content
Erschienen in: European Journal of Wood and Wood Products 5/2014

01.09.2014 | Original

Hygrothermal aging properties, molding and abrasion resistance of bamboo keyboard

verfasst von: Deng Jianchao, Chen Fuming, Wang Ge, Qin Daochun, Zhang Xiaoke, Feng Xuquan

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 5/2014

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Bamboo keyboards made from bamboo panels are exposed to the influence of mold infection, hygrothermal environment and repeated wear. Mold resistance and hygrothermal aging properties of bamboo keyboard under different treatments were investigated. The abrasion resistance was experimentally studied and compared between bamboo keyboard and plastic keyboard. The results indicated that the bamboo keyboard treated with H2O2 exhibited the best mold resistance, followed by that treated with varnish, and then came the ones with mildew preventive treatment and the control specimens. Although hardly visible to the naked eye after 4 weeks of mold infection test, mold was observed on most plastic keyboards through microscopic examination. For aging test, the shrinkage ratio of bamboo keystroke was 0.34, 0.46 and 0.62 % after high and low temperature (HLT) treatment, while the swelling ratio was 0.01, 1.14 and 1.93 % after constant temperature and humidity (CTH) treatment, respectively. Similar trend in the ratio of dimensional change was observed in terms of both drying shrinkage and hydroscopic swelling: thickness direction > perpendicular-to-grain direction > grain direction. By manual observation, the bamboo keyboard had an advantage over plastic keyboards in terms of the adaptability to an environment of changing temperature. For abrasion test, the wear point of bamboo keyboard was 650 r and that of plastic 150 r indicating that bamboo keyboards performed better in terms of abrasion resistance than plastic ones.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
Zurück zum Zitat Bjurman J (1992) The protective effect of 23 paint systems on wood against attack by decay fungi. Holz Roh Werkst 50(5):201–206CrossRef Bjurman J (1992) The protective effect of 23 paint systems on wood against attack by decay fungi. Holz Roh Werkst 50(5):201–206CrossRef
Zurück zum Zitat Chand N, Dwivedi UK (2007) High stress abrasive wear study on bamboo. J Mater Process Technol 183(2):155–159CrossRef Chand N, Dwivedi UK (2007) High stress abrasive wear study on bamboo. J Mater Process Technol 183(2):155–159CrossRef
Zurück zum Zitat Chand N, Dwivedi UK, Acharya SK (2007) Anisotropic abrasive wear behaviour of bamboo (Dentrocalamus strictus). Wear 262(9):1031–1037CrossRef Chand N, Dwivedi UK, Acharya SK (2007) Anisotropic abrasive wear behaviour of bamboo (Dentrocalamus strictus). Wear 262(9):1031–1037CrossRef
Zurück zum Zitat Chen GH (1985) Bamboo plywood. A new product of structural material with high strength properties. In: proceedings of the 2nd international bamboo workshop, Hangzhou, China Chen GH (1985) Bamboo plywood. A new product of structural material with high strength properties. In: proceedings of the 2nd international bamboo workshop, Hangzhou, China
Zurück zum Zitat Chen H, Miao M, Ding X (2009) Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites. Compos A 40(12):2013–2019CrossRef Chen H, Miao M, Ding X (2009) Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites. Compos A 40(12):2013–2019CrossRef
Zurück zum Zitat Cheng D, Jiang S, Zhang Q (2013) Mould resistance of Moso bamboo treated by two step heat treatment with different aqueous solutions. Eur J Wood Prod 71(1):143–145CrossRef Cheng D, Jiang S, Zhang Q (2013) Mould resistance of Moso bamboo treated by two step heat treatment with different aqueous solutions. Eur J Wood Prod 71(1):143–145CrossRef
Zurück zum Zitat Chinese standard GB/T 18102-2007, laminate flooring Chinese standard GB/T 18102-2007, laminate flooring
Zurück zum Zitat Chinese standard GB/T 18261-2000, testing method for anti-mould chemicals in controlling mould and blue stain fungi on wood Chinese standard GB/T 18261-2000, testing method for anti-mould chemicals in controlling mould and blue stain fungi on wood
Zurück zum Zitat Chung KF, Yu WK (2002) Mechanical properties of structural bamboo for bamboo scaffoldings. Eng Struct 24(4):429–442CrossRef Chung KF, Yu WK (2002) Mechanical properties of structural bamboo for bamboo scaffoldings. Eng Struct 24(4):429–442CrossRef
Zurück zum Zitat Denise AD, Anderson de SS, Pilar R de M (2012) Occurrence of molds on laminated paperboard for aseptic packaging, selection of the most hydrogen peroxide- and heat-resistant isolates and determination of their thermal death kinetics in sterile distilled water. World J Microbiol Biotechnol 28(7):2609–2614CrossRef Denise AD, Anderson de SS, Pilar R de M (2012) Occurrence of molds on laminated paperboard for aseptic packaging, selection of the most hydrogen peroxide- and heat-resistant isolates and determination of their thermal death kinetics in sterile distilled water. World J Microbiol Biotechnol 28(7):2609–2614CrossRef
Zurück zum Zitat Etsion I (2004) Improving tribological performance of mechanical components by laser surface texturing. Tribol Lett 17(4):733–737CrossRef Etsion I (2004) Improving tribological performance of mechanical components by laser surface texturing. Tribol Lett 17(4):733–737CrossRef
Zurück zum Zitat Guan MJ, GAO J, Zhu YX (2009) Dimensional stability between sympodial bamboo and moso bamboo flooring under hygrothermal environment. J Nanjing For Univ (Nat Sci Ed) 33(2):90–94 Guan MJ, GAO J, Zhu YX (2009) Dimensional stability between sympodial bamboo and moso bamboo flooring under hygrothermal environment. J Nanjing For Univ (Nat Sci Ed) 33(2):90–94
Zurück zum Zitat Hirano Y, Shida S, Arima T (2003) Effect of cutting season on biodeterioration in Madake (Phyllostachys bambusoides). J Jpn Wood Res Soc 49(6):437–445 Hirano Y, Shida S, Arima T (2003) Effect of cutting season on biodeterioration in Madake (Phyllostachys bambusoides). J Jpn Wood Res Soc 49(6):437–445
Zurück zum Zitat Lee AWC, Bai X, Bangi AP (1997) Flexural properties of bamboo-reinforced southern pine OSB beams. For Prod J 47(6):74–78 Lee AWC, Bai X, Bangi AP (1997) Flexural properties of bamboo-reinforced southern pine OSB beams. For Prod J 47(6):74–78
Zurück zum Zitat Liese W (1987) Research on bamboo. Wood Sci Technol 21(3):189–209 Liese W (1987) Research on bamboo. Wood Sci Technol 21(3):189–209
Zurück zum Zitat Liese W, Kumar S (2003) Bamboo preservation compendium. Cent Indian Bamboo Resour Technol Liese W, Kumar S (2003) Bamboo preservation compendium. Cent Indian Bamboo Resour Technol
Zurück zum Zitat Mark S (1981) Protecting latex house paints from midew. Modern Paint and Coatings. 32–35 Mark S (1981) Protecting latex house paints from midew. Modern Paint and Coatings. 32–35
Zurück zum Zitat Matsumoto K, Yamauchi H, Yamada M, Taki K, Yoshida H (2001) Manufacture and properties of fiberboard made from moso bamboo. J wood sci 47(2):111–119 Matsumoto K, Yamauchi H, Yamada M, Taki K, Yoshida H (2001) Manufacture and properties of fiberboard made from moso bamboo. J wood sci 47(2):111–119
Zurück zum Zitat Naceur D, Haythem M, Claude L, Bernard D, Marie-T Mohamed EA, Christophe J (2011) Hydrogen peroxide scavenging mechanisms are components of Medicago truncatula partial resistance to Aphanomyces euteiches. Eur J Plant Pathol 131(4):559–571 Naceur D, Haythem M, Claude L, Bernard D, Marie-T Mohamed EA, Christophe J (2011) Hydrogen peroxide scavenging mechanisms are components of Medicago truncatula partial resistance to Aphanomyces euteiches. Eur J Plant Pathol 131(4):559–571
Zurück zum Zitat Nugroho N, Ando N (2000) Development of structural composite products made from bamboo I: fundamental properties of bamboo zephyr board. J wood sci 46(1):68–74CrossRef Nugroho N, Ando N (2000) Development of structural composite products made from bamboo I: fundamental properties of bamboo zephyr board. J wood sci 46(1):68–74CrossRef
Zurück zum Zitat Nugroho N, Ando N (2001) Development of structural composite products made from bamboo II: fundamental properties of laminated bamboo lumber. J wood sci 47(3):237–242CrossRef Nugroho N, Ando N (2001) Development of structural composite products made from bamboo II: fundamental properties of laminated bamboo lumber. J wood sci 47(3):237–242CrossRef
Zurück zum Zitat Shao ZP, Zhou L, Liu YM, Wu ZM, Arnaud C (2010) Differences in structure and strength between internode and node sections of moso bamboo. J tropical for sci 22(2):133–138 Shao ZP, Zhou L, Liu YM, Wu ZM, Arnaud C (2010) Differences in structure and strength between internode and node sections of moso bamboo. J tropical for sci 22(2):133–138
Zurück zum Zitat Shen J, Qi Z, Shu J (2002) On Structure, production, and market of bamboo-based panels in China. J Fo Res 13(2):151–156 Shen J, Qi Z, Shu J (2002) On Structure, production, and market of bamboo-based panels in China. J Fo Res 13(2):151–156
Zurück zum Zitat Siddique R, Kapoor K, Kadri EH, Bennacer R (2012) Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete. Constr Build Mater 29:270–278CrossRef Siddique R, Kapoor K, Kadri EH, Bennacer R (2012) Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete. Constr Build Mater 29:270–278CrossRef
Zurück zum Zitat Sumardi I, Suzuki S, Ono K (2006) Some important properties of strandboard manufactured from bamboo. Forest Prod J 56(6):59–63 Sumardi I, Suzuki S, Ono K (2006) Some important properties of strandboard manufactured from bamboo. Forest Prod J 56(6):59–63
Zurück zum Zitat Sun FL, Mao SF, Wen GF, Duan XF, Chen QL (2006) Anti-mold effects of bamboo timber treated with different solutions. J Zhejiang For Coll 23:135–139 Sun FL, Mao SF, Wen GF, Duan XF, Chen QL (2006) Anti-mold effects of bamboo timber treated with different solutions. J Zhejiang For Coll 23:135–139
Zurück zum Zitat Sun F, Bao B, Ma L, Chen A, Duan X (2012) Mould-resistance of bamboo treated with the compound of chitosan-copper complex and organic fungicides. J Wood Sci 58(1):51–56CrossRef Sun F, Bao B, Ma L, Chen A, Duan X (2012) Mould-resistance of bamboo treated with the compound of chitosan-copper complex and organic fungicides. J Wood Sci 58(1):51–56CrossRef
Zurück zum Zitat Thwe MM, Liao K (2003) Environmental effects on bamboo-glass/polypropylene hybrid composites. J mater sci 38(2):363–376CrossRef Thwe MM, Liao K (2003) Environmental effects on bamboo-glass/polypropylene hybrid composites. J mater sci 38(2):363–376CrossRef
Zurück zum Zitat Tomak ED, Topaloglu E, Ay N, Yildiz UC (2012) Effect of accelerated aging on some physical and mechanical properties of bamboo. Wood Sci Technol 46(5):905–918CrossRef Tomak ED, Topaloglu E, Ay N, Yildiz UC (2012) Effect of accelerated aging on some physical and mechanical properties of bamboo. Wood Sci Technol 46(5):905–918CrossRef
Zurück zum Zitat Tomak ED, Topaloglu E, Gumuskaya E, Yildiz UC, Ay N (2013) An FT-IR study of the changes in chemical composition of bamboo degraded by brown-rot fungi. Int Biodeterior Biodegrad 85:131–138CrossRef Tomak ED, Topaloglu E, Gumuskaya E, Yildiz UC, Ay N (2013) An FT-IR study of the changes in chemical composition of bamboo degraded by brown-rot fungi. Int Biodeterior Biodegrad 85:131–138CrossRef
Zurück zum Zitat Tong J, Ma Y, Chen D, Sun J, Ren L (2005) Effects of vascular fiber content on abrasive wear of bamboo. Wear 259(1):78–83CrossRef Tong J, Ma Y, Chen D, Sun J, Ren L (2005) Effects of vascular fiber content on abrasive wear of bamboo. Wear 259(1):78–83CrossRef
Zurück zum Zitat Virginia FP, Andrea P, Graciela P (2012) Plant extracts as natural antifungals: alternative strategies for mold control in foods. Nov Technol Food Sci 7:205–218 Virginia FP, Andrea P, Graciela P (2012) Plant extracts as natural antifungals: alternative strategies for mold control in foods. Nov Technol Food Sci 7:205–218
Zurück zum Zitat Xie Y, Hill CAS, Jalaludin Z, Curling SF, Anandjiwala RD, Norton AJ, Newman G (2011) The dynamic water vapour sorption behaviour of natural fibres and kinetic analysis using the parallel exponential kinetics model. J mater sci 46(2):479–489CrossRef Xie Y, Hill CAS, Jalaludin Z, Curling SF, Anandjiwala RD, Norton AJ, Newman G (2011) The dynamic water vapour sorption behaviour of natural fibres and kinetic analysis using the parallel exponential kinetics model. J mater sci 46(2):479–489CrossRef
Zurück zum Zitat Xu Y, Zhang Y, Wang W (2001) Study on manufacturing technology of MDF from bamboo. In: proceedings of the utilization of agricultural and forestry residues, Nanjing, China, pp 117–123 Xu Y, Zhang Y, Wang W (2001) Study on manufacturing technology of MDF from bamboo. In: proceedings of the utilization of agricultural and forestry residues, Nanjing, China, pp 117–123
Zurück zum Zitat Yoko O, Tsuyoshi Y, Yuji I (2006) Seasonal and height-dependent fluctuation of starch and free glucose contents in moso bamboo (Phyllostachys pubescens) and its relation to attack by termites and decay fungi. J Wood Sci 52(5):445–451CrossRef Yoko O, Tsuyoshi Y, Yuji I (2006) Seasonal and height-dependent fluctuation of starch and free glucose contents in moso bamboo (Phyllostachys pubescens) and its relation to attack by termites and decay fungi. J Wood Sci 52(5):445–451CrossRef
Zurück zum Zitat Yu Y, Jiang Z, Wang G, Tian G, Wang H, Song Y (2012) Surface functionalization of bamboo with nanostructured ZnO. Wood Sci Technol 46(4):781–790CrossRef Yu Y, Jiang Z, Wang G, Tian G, Wang H, Song Y (2012) Surface functionalization of bamboo with nanostructured ZnO. Wood Sci Technol 46(4):781–790CrossRef
Zurück zum Zitat Zhang HJ (2001) A new structural panel composite: bamboo-based waferboard. In: proceedings of the utilization of agricultural and forestry residues, Nanjing, China, pp 204-209 Zhang HJ (2001) A new structural panel composite: bamboo-based waferboard. In: proceedings of the utilization of agricultural and forestry residues, Nanjing, China, pp 204-209
Zurück zum Zitat Zhang M, Kawai S, Yusuf S, Imamura Y, Sasaki H (1997) Manufacture of wood composites using lignocellulosic materials and their properties III. Properties of bamboo particleboards and dimensional stability improvement by using a steam-injection press. J Jpn Wood Res Soc 43(4):318–326 Zhang M, Kawai S, Yusuf S, Imamura Y, Sasaki H (1997) Manufacture of wood composites using lignocellulosic materials and their properties III. Properties of bamboo particleboards and dimensional stability improvement by using a steam-injection press. J Jpn Wood Res Soc 43(4):318–326
Zurück zum Zitat Zhang X, Wang G, Feng X, Cheng H, Liu X, Chen F (2012) The exploitation of bamboo keyboard and mouse and their application market analysis. China For Prod Ind 39(6):31–34 Zhang X, Wang G, Feng X, Cheng H, Liu X, Chen F (2012) The exploitation of bamboo keyboard and mouse and their application market analysis. China For Prod Ind 39(6):31–34
Zurück zum Zitat Zhang YM, Yu YL, Yu WJ (2013) Effect of thermal treatment on the physical and mechanical properties of phyllostachys pubescen bamboo. Eur J Wood Wood Prod 71(1):61–67CrossRef Zhang YM, Yu YL, Yu WJ (2013) Effect of thermal treatment on the physical and mechanical properties of phyllostachys pubescen bamboo. Eur J Wood Wood Prod 71(1):61–67CrossRef
Metadaten
Titel
Hygrothermal aging properties, molding and abrasion resistance of bamboo keyboard
verfasst von
Deng Jianchao
Chen Fuming
Wang Ge
Qin Daochun
Zhang Xiaoke
Feng Xuquan
Publikationsdatum
01.09.2014
Verlag
Springer Berlin Heidelberg
Erschienen in
European Journal of Wood and Wood Products / Ausgabe 5/2014
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI
https://doi.org/10.1007/s00107-014-0828-2

Weitere Artikel der Ausgabe 5/2014

European Journal of Wood and Wood Products 5/2014 Zur Ausgabe