nach oben

International Journal of Automotive Technology

22.12.2024 | Engine and Emissions, Fuels and Lubricants

Impact of Aluminum Nitrate and Graphene Oxide Nanoplate on Performance and Emission Characteristics of a CRDI Diesel Engine Powered by Industrial Leather Waste Fat Biodiesel

verfasst von: N. Mohanrajhu, S. Sekar, Ravikumar Jayabal, R. Sureshkumar

Erschienen in: International Journal of Automotive Technology

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This study investigates the effect of nano-additives, such as aluminum nitrate (Al(NO₃)₃) and graphene oxide nanoplate (GONP), on the performance and emissions of a common rail direct injection (CRDI) diesel engine at maximum load. It also compares injection timings (IT) at 21, 23, and 25° crank angle (CA) before top dead center (bTDC) with exhaust gas recirculation (EGR) rates of 10, 15, and 20%. The engine uses blends, such as B50 (50% diesel and 50% leather industrial waste fat biodiesel (LIWFB)), B50 + Al(NO₃)₃, and B50 + GONP. The results revealed that adding Al(NO₃)₃ and GONP increases cylinder pressure and heat release rate (HRR). The B50 + GONP blend increases brake thermal efficiency (BTE) by 2.75% over the LIWFB mixture at 10% EGR and 1.42% over B50 + Al(NO₃)₃. It also lowers brake-specific energy consumption (BSEC) by 1.06% and 0.583%, compared to LIWFB and B50 + Al(NO₃)₃. Adding GONP to the B50 blend reduces explicitly emissions, such as smoke by 9.09%, 10.17%, and 3.53%, HC by 45.45%, 11.11%, and 7.69%, and CO by 28.99%, 10.44%, and 5.51% compared to diesel, LIWFB, and B50 + Al(NO₃)₃ at 25° CA and 10% EGR. The LIWFB produced 61.72% lower NOx emissions than diesel at 23° CA and EGR at 20%.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

ATZelectronics worldwide

ATZlectronics worldwide is up-to-speed on new trends and developments in automotive electronics on a scientific level with a high depth of information.

Order your 30-days-trial for free and without any commitment.

Jetzt informieren

ATZelektronik

Die Fachzeitschrift ATZelektronik bietet für Entwickler und Entscheider in der Automobil- und Zulieferindustrie qualitativ hochwertige und fundierte Informationen aus dem gesamten Spektrum der Pkw- und Nutzfahrzeug-Elektronik.

Lassen Sie sich jetzt unverbindlich 2 kostenlose Ausgabe zusenden.

Jetzt informieren

Agarwal, A. K., & Gupta, K. (2021). Enhancing combustion performance of biodiesel using graphene oxide nanoplatelets: a comprehensive review. Renewable and Sustainable Energy Reviews, 137, 110589. https://doi.org/10.1016/j.rser.2020.110589CrossRef

Al-Shahrany, A. S., & Hassan, A. S. A. (2022). Influence of combustion chamber design parameters and intake environments on spark ignition engine performance and exhaust gas emission. Open Journal of Applied Sciences, 12(06), 930–943. https://doi.org/10.4236/ojapps.2022.126064CrossRef

Altarazi, Y. S. M., Abu Talib, A. R., Yu, J., Gires, E., Abdul Ghafir, M. F., Lucas, J., & Yusaf, T. (2022). Effects of biofuel on engines performance and emission characteristics: a review. Energy, 238, 121910. https://doi.org/10.1016/j.energy.2021.121910CrossRef

Anbarsooz, M. (2023). Combustion characteristics of nanofuels: A comprehensive review on diesel/biodiesel-based nanofuels. Fuel, 337, 126834. https://doi.org/10.1016/j.fuel.2022.126834CrossRef

Annamalai, B., & Murugesan, P. (2024). The combined effect of hydrogen enrichment and exhaust gas recirculation on the combustion stability, performance and emissions of CI engine energised by algae biodiesel. International Journal of Hydrogen Energy, 50, 524–546. https://doi.org/10.1016/j.ijhydene.2023.09.278CrossRef

Ansari, A. M., Memon, L. A., Ghannam, M. T., & Selim, M. Y. E. (2023). Impact of biodiesel blended fuel with nanoparticles on performance and noise emission in compression ignition engine. International Journal of Thermofluids, 19, 100390. https://doi.org/10.1016/j.ijft.2023.100390CrossRef

Appala, V. N. S. G., Pandhare, N. N., & Bajpai, S. (2022). Biorefining of leather solid waste to harness energy and materials—A review. Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-022-02455-8CrossRef

Ashok, B., Kumar, A. N., Jacob, A., & Vignesh, R. (2022). Emission formation in IC engines. NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines. https://doi.org/10.1016/b978-0-12-823955-1.00001-2CrossRef

Babu, D., & Anand, R. (2019). Influence of fuel injection timing and nozzle opening pressure on a CRDI-assisted diesel engine fueled with biodiesel-diesel-alcohol fuel. Advances in Eco-Fuels for a Sustainable Environment. https://doi.org/10.1016/b978-0-08-102728-8.00013-9CrossRef

Babu, R. K., Jayabal, R., & Devarajan, Y. (2023). Mitigating carcinogenic smoke opacity in a light-duty diesel engine by utilising cyclohexanol polyethylene glycol and 2-methoxyethanol. Environmental Science and Pollution Research. https://doi.org/10.1007/s11356-023-26020-6CrossRef

Bhatt, P., & Gohil, J. M. (2023). Influence of graphene oxide nanoplatelets on performance, combustion, and emission characteristics of a biodiesel-fueled diesel engine. Journal of Cleaner Production, 383, 135399. https://doi.org/10.1016/j.jclepro.2022.135399CrossRef

Chacko, S., & Jeyaseelan, T. (2020). Impact of graphene oxide nanoplatelets as nano additives on the performance and emission characteristics of a biodiesel-fueled engine. Fuel, 265, 116921. https://doi.org/10.1016/j.fuel.2019.116921CrossRef

Damian, C. S., Devarajan, Y., & Jayabal, R. (2024). Biodiesel production in India: Prospects challenges and sustainable directions. Biotechnology and Bioengineering. https://doi.org/10.1002/bit.28643CrossRef

Damodharan, D., Sathiyagnanam, A. P., Rana, D., Kumar, B. R., & Saravanan, S. (2018). Combined influence of injection timing and EGR on combustion, performance and emissions of DI diesel engine fueled with neat waste plastic oil. Energy Conversion and Management, 161, 294–305. https://doi.org/10.1016/j.enconman.2018.01.045CrossRef

Devarajan, Y., Nagappan, B., Choubey, G., Vellaiyan, S., & Mehar, K. (2021). Renewable pathway and twin fueling approach on ignition analysis of a dual-fuelled compression ignition engine. Energy & Fuels, 35(12), 9930–9936. https://doi.org/10.1021/acs.energyfuels.0c04237CrossRef

Devarajan, Y., Jayabal, R., Munuswamy, D. B., Ganesan, S., & Varuvel, E. G. (2022a). Biofuel from leather waste fat to lower diesel engine emissions: Valuable solution for lowering fossil fuel usage and perception on waste management. Process Safety and Environmental Protection, 165, 374–379. https://doi.org/10.1016/j.psep.2022.07.001CrossRef

Devarajan, Y., Jayabal, R., Munuswamy, D. B., Ganesan, S., & Varuvel, E. G. (2022). Biofuel from leather waste fat to lower diesel engine emissions: valuable solution for lowering fossil fuel usage and perception on waste management. Process Safety and Environmental Protection, 165, 374–79. https://doi.org/10.1016/j.psep.2022.07.001CrossRef

Duraisamy, P., Subramani, S., & Jayabal, R. (2023). Performance and emissions characteristics of a common rail direct injection diesel engine powered by ignition enhancer-biodiesel blends. International Journal of Environmental Science and Technology. https://doi.org/10.1007/s13762-023-04891-zCrossRef

Elbanna, A. M., Xiaobei, C., Can, Y., Elkelawy, M., & Bastawissi, H.A.-E. (2022). A comparative study of the effect of different premixed charge ratios with conventional diesel engines on the performance, emissions, and vibrations of the engine block. Environmental Science and Pollution Research, 30(49), 106774–106789. https://doi.org/10.1007/s11356-022-23049-xCrossRef

Elumalai, P. V., Parthasarathy, M., Lalvani, J. S., Mehboob, H., Samuel, O. D., Enweremadu, C. C., Saleel, C. A., & Afzal, A. (2021). Effect of injection timing in reducing the harmful pollutants emitted from CI engine using N-butanol antioxidant blended eco-friendly Mahua biodiesel. Energy Reports, 7, 6205–6221. https://doi.org/10.1016/j.egyr.2021.09.028CrossRef

Esakki, T., & Mangudi Rangaswamy, S. (2021). Extraction and utilisation of biodiesel from tannery fleshing waste in a diesel engine equipped with common rail direct injection system for cleaner emission. Energy Sources Part A Recovery Utilisation and Environmental Effects. https://doi.org/10.1080/15567036.2021.1900455CrossRef

Esakki, T., Rangaswamy, S. M., & Jayabal, R. (2022). An experimental study on biodiesel production and impact of EGR in a CRDI diesel engine propelled with leather industry waste fat biodiesel. Fuel, 321, 123995. https://doi.org/10.1016/j.fuel.2022.123995CrossRef

Fayad, M. A., Alani, W. K., Dhahad, H. A., & Zheng, J. (2023). Diminution of air pollution from NOX and smoke/soot emitted from alcohols/diesel blends in diesel engine and influence of the exhaust gas recirculation (EGR). Journal of Environmental Engineering and Landscape Management, 31(1), 103–112. https://doi.org/10.3846/jeelm.2023.17410CrossRef

Gupta, M., Pal, A., & Agarwal, A. K. (2020). Effect of fuel injection timing strategies on combustion, performance, and emissions of a biodiesel-fueled engine. Energy Conversion and Management, 221, 113155. https://doi.org/10.1016/j.enconman.2020.113155CrossRef

Hanumanthu, R., & Nuthalapati, S. (2023). Trade-off study and the influence of different fuel injection strategies to enhance the engine characteristics powered with ternary fuel in CRDI diesel engine. Environmental Science and Pollution Research. https://doi.org/10.1007/s11356-023-29131-2CrossRef

Hoang, A. T. (2021). Combustion behavior, performance and emission characteristics of diesel engine fuelled with biodiesel containing cerium oxide nanoparticles: a review. Fuel Processing Technology, 218, 106840. https://doi.org/10.1016/j.fuproc.2021.106840CrossRef

Jayabal, R. (2024a). Effect of hydrogen/sapota seed biodiesel as an alternative fuel in a diesel engine using dual-fuel mode. Process Safety and Environmental Protection, 183, 890–900. https://doi.org/10.1016/j.psep.2024.01.046CrossRef

Jayabal, R. (2024b). Optimization and impact of modified operating parameters of a diesel engine emissions characteristic utilizing waste fat biodiesel/di-tert-butyl peroxide blend. Process Safety and Environmental Protection, 186, 694–705. https://doi.org/10.1016/j.psep.2024.04.019CrossRef

Jayabal, R., Thangavelu, L., & Subramani, S. (2020). Combined effect of oxygenated additives, injection timing and EGR on combustion, performance and emission characteristics of a CRDi diesel engine powered by sapota biodiesel/diesel blends. Fuel, 276, 118020. https://doi.org/10.1016/j.fuel.2020.118020CrossRef

Jayabal, R., Soundararajan, G., Kumar, R. A., Choubey, G., Devarajan, Y., Raja, T., & Kaliappan, N. (2023). Study of the effects of bio-silica nanoparticle additives on the performance, combustion, and emission characteristics of biodiesel produced from waste fat. Scientific Reports. https://doi.org/10.1038/s41598-023-46140-wCrossRef

Jiangjun, W., Zenghui, Y., Chunmei, W., Gang, Lv., Yuan, Z., Xiangrong, Li., & Han, W. (2021). Impact of aluminium oxide nanoparticles as an additive in diesel-methanol blends on a modern DI diesel engine. Applied Thermal Engineering. https://doi.org/10.1016/J.APPLTHERMALENG.2020.116372CrossRef

Jin, C., & Wei, J. (2023). The combined effect of water and nanoparticles on diesel engine powered by biodiesel and its blends with diesel: A review. Fuel, 343, 127940. https://doi.org/10.1016/j.fuel.2023.127940CrossRef

Kannan, R., Ramalingam, S., Sampath, S., Nedunchezhiyan, M., Dillikannan, D., & Jayabal, R. (2024). Optimization and synthesis process of biodiesel production from coconut oil using central composite rotatable design of response surface methodology. Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089241230251CrossRef

Keskin, A., Şen, M., & Emiroğlu, A. O. (2020). Experimental studies on biodiesel production from leather industry waste fat and its effect on diesel engine characteristics. Fuel, 276, 118000. https://doi.org/10.1016/j.fuel.2020.118000CrossRef

Khoa, N. X., Quach Nhu, Y., & Lim, O. (2020). Estimation of parameters affected in internal exhaust residual gases recirculation and the influence of exhaust residual gas on performance and emission of a spark ignition engine. Applied Energy, 278, 115699. https://doi.org/10.1016/j.apenergy.2020.115699CrossRef

Koirala, M., Sah, A. K., Dhakal, R. P., Karn, R. L., Khanal, M., & Adhikari, S. P. (2023). Effect of green synthesised zinc oxide nanoadditives and rice bran oil biodiesel blend on performance and combustion characteristics of a variable compression ratio diesel engine: an experimental study. Biofuels Bioproducts and Biorefining, 17(6), 1595–1610. https://doi.org/10.1002/bbb.2527CrossRef

Küçükosman, R., Yontar, A. A., & Ocakoglu, K. (2022). Nanoparticle additive fuels: Atomisation, combustion and fuel characteristics. Journal of Analytical and Applied Pyrolysis, 165, 105575. https://doi.org/10.1016/j.jaap.2022.105575CrossRef

Kumar, S., Sharma, D., & Yadav, R. K. (2021). Effect of injection timing and pressure on performance, combustion, and emission characteristics of a biodiesel-fueled diesel engine. Energy, 226, 120357. https://doi.org/10.1016/j.energy.2021.120357CrossRef

Kumbhar, V., Pandey, A., Sonawane, C. R., Panchal, H., & Ağbulut, Ü. (2023). Numerical and experimental investigation of the influence of various metal-oxide-based nanoparticles on performance, combustion, and emissions of CI engine fuelled with tamarind seed oil methyl ester. Energy, 265, 126258. https://doi.org/10.1016/j.energy.2022.126258CrossRef

Li, J., & Liu, H. (2020). The role of exhaust gas recirculation in controlling NOx emissions in diesel engines: A review. Renewable and Sustainable Energy Reviews, 131, 110017. https://doi.org/10.1016/j.rser.2020.110017CrossRef

Lionus Leo, G. M., Murugapoopathi, S., Thodda, G., Baligidad, S. M., Jayabal, R., Nedunchezhiyan, M., & Devarajan, Y. (2023). Optimisation and environmental analysis of waste cashew nut shell oil biodiesel/cerium oxide nanoparticles blends and acetylene fumigation in agricultural diesel engine. Sustainable Energy Technologies and Assessments, 58, 103375. https://doi.org/10.1016/j.seta.2023.103375CrossRef

Lionus Leo, G. M., Jayabal, R., Srinivasan, D., Chrispin Das, M., Ganesh, M., & Gavaskar, T. (2024). Predicting the performance and emissions of an HCCI-DI engine powered by waste cooking oil biodiesel with Al2O3 and FeCl3 nano additives and gasoline injection—A random forest machine learning approach. Fuel, 357, 129914. https://doi.org/10.1016/j.fuel.2023.129914CrossRef

Madhu, S., Lionus Leo, G. M., Prathap, P., Devarajan, Y., & Jayabal, R. (2023). Effective utilisation of waste pork fat as a potential alternate fuel in CRDI research diesel engine—waste reduction and consumption technique. Process Safety and Environmental Protection, 172, 815–24. https://doi.org/10.1016/j.psep.2023.02.057CrossRef

Mahgoub, B. K. M. (2023). Effect of nano-biodiesel blends on CI engine performance, emissions and combustion characteristics – Review. Heliyon, 9(11), e21367. https://doi.org/10.1016/j.heliyon.2023.e21367CrossRef

Mofijur, M., Ahmed, S. F., Ahmed, B., Mehnaz, T., Mehejabin, F., Shome, S., Almomani, F., Chowdhury, A. A., Kalam, M. A., Badruddin, I. A., & Kamangar, S. (2024). Impact of nanoparticle-based fuel additives on biodiesel combustion: An analysis of fuel properties, engine performance, emissions, and combustion characteristics. Energy Conversion and Management: X, 21, 100515. https://doi.org/10.1016/j.ecmx.2023.100515CrossRef

Mogal, S. B., Singh, A., Kumar, N., & Gupta, R. (2022). Effect of graphene oxide nanoplatelets on the performance, combustion, and emission characteristics of a biodiesel-fueled compression ignition engine. Energy, 245, 123264. https://doi.org/10.1016/j.energy.2022.123264CrossRef

Mohanrajhu, N., Sekar, S., Jayabal, R., & Sureshkumar, R. (2024). Screening nano additives for favorable NOx/smoke emissions trade-off in a CRDI diesel engine fueled by industry leather waste fat biodiesel blend. Process Safety and Environmental Protection, 187, 332–342. https://doi.org/10.1016/j.psep.2024.04.115CrossRef

Molina, S., García, A., Monsalve-Serrano, J., & Villalta, D. (2019). Effects of fuel injection parameters on premixed charge compression ignition combustion and emission characteristics in a medium-duty compression ignition diesel engine. International Journal of Engine Research, 22(2), 443–455. https://doi.org/10.1177/1468087419867014CrossRef

Muralidharan, V., Palanivel, S., & Balaraman, M. (2022). Turning problem into possibility: A comprehensive review on leather solid waste intra-valorization attempts for leather processing. Journal of Cleaner Production, 367, 133021. https://doi.org/10.1016/j.jclepro.2022.133021CrossRef

Nanthagopal, K., Kishna, R. S., Atabani, A. E., Al-Muhtaseb, A. H., Kumar, G., & Ashok, B. (2020). A compressive review on the effects of alcohols and nanoparticles as an oxygenated enhancer in compression ignition engine. Energy Conversion and Management, 203, 112244. https://doi.org/10.1016/j.enconman.2019.112244CrossRef

Prakash, S., Sajin, J. B., & Ravikumar, J. (2019). Emission impact of pentanol on pongamia biodiesel propelled diesel engine. International Journal of Ambient Energy, 43(1), 237–42. https://doi.org/10.1080/01430750.2019.1636883CrossRef

Praveena, V., Akshaykumar, U., & Nishad, T. (2021). Effects of biodiesel-pentanol-diesel blends with varied EGR in a CRDI engine. Journal of Physics: Conference Series, 2054(1), 012050. https://doi.org/10.1088/1742-6596/2054/1/012050CrossRef

Prem Anand, B., Yadav, P. R., & S., Aasthiya, B., Akshaya, G., & Arulmozhi, K. (2018). Effect of fuel injection strategies on the performance of the common rail diesel injection (CRDI) engine powered by biofuel. International Journal of Ambient Energy, 41(14), 1577–1586. https://doi.org/10.1080/01430750.2018.1517690CrossRef

Priya, T. S., Kumar, K. S., & Manigandan, S. (2019). Investigation on the effects of nano additives on performance and emissions of a diesel engine fuelled with biodiesel. Energy Sources, Part a: Recovery, Utilization, and Environmental Effects, 41(11), 1305–1317. https://doi.org/10.1080/15567036.2018.1520340CrossRef

Radheshyam, Santhosh, K., & Kumar, G. N. (2020). Effect of 1-pentanol addition and EGR on the combustion, performance and emission characteristic of a CRDI diesel engine. Renewable Energy, 145, 925–936. https://doi.org/10.1016/j.renene.2019.06.043CrossRef

Ramachander, J., Gugulothu, S. K., Sastry, G. R., & Surya, M. S. (2021). Statistical and experimental investigation of the influence of fuel injection strategies on CRDI engine assisted CNG dual fuel diesel engine. International Journal of Hydrogen Energy, 46(42), 22149–22164. https://doi.org/10.1016/j.ijhydene.2021.04.010CrossRef

Ramalingam, S., Munuswamy, D. B., & Devarajan, Y. (2024). Combustion enhancement and emission reduction in RCCI engine using green synthesized CuO nanoparticles with Cymbopogon martinii methyl ester and phytol blends. Industrial Crops and Products, 218, 118969. https://doi.org/10.1016/j.indcrop.2024.118969CrossRef

Razzaq, L., Mujtaba, M. A., Soudagar, M. E. M., Ahmed, W., Fayaz, H., Bashir, S., Fattah, I. M. R., Ong, H. C., Shahapurkar, K., Afzal, A., Wageh, S., Al-Ghamdi, A., Ali, M. S., & EL-Seesy, A. I. (2021). Engine performance and emission characteristics of palm biodiesel blends with graphene oxide nanoplatelets and dimethyl carbonate additives. Journal of Environmental Management, 282, 111917. https://doi.org/10.1016/j.jenvman.2020.111917CrossRef

Sahu, A. K., & Das, L. M. (2018). Influence of aluminum nitrate as an additive in biodiesel blends on the performance and emission characteristics of a diesel engine. Energy Sources, Part a: Recovery, Utilization, and Environmental Effects, 40(5), 558–569. https://doi.org/10.1080/15567036.2017.1384282CrossRef

Santhosh, K., Kumar, G. N., & Radheshyam, & Sanjay, P. V. (2020). Experimental analysis of performance and emission characteristics of CRDI diesel engine fueled with 1-pentanol/diesel blends with EGR technique. Fuel, 267, 117187. https://doi.org/10.1016/j.fuel.2020.117187CrossRef

Shanmuga Priya, T., Kumar, K. S., & Manigandan, S. (2019a). Investigation on the effects of nano additives on performance and emissions of a diesel engine fuelled with biodiesel. Energy Sources, Part a: Recovery, Utilization, and Environmental Effects, 41(11), 1305–1317. https://doi.org/10.1080/15567036.2018.1520340CrossRef

Shanmuga Priya, T., Kumar, K. S., & Manigandan, S. (2019b). Influence of injection timing on the performance and emissions of a diesel engine fueled with biodiesel. Energy Sources, Part a: Recovery, Utilization, and Environmental Effects, 41(14), 1712–1724. https://doi.org/10.1080/15567036.2018.1490603CrossRef

Subramanian, K., Paramasivam, S. A., Dillikannan, D., & Jayabal, R. (2023). Effect of pilot fuel injection strategies and EGR on a CRDI diesel engine powered by simmondsia chinensis seed biodiesel-methyl acetate blend. Sustainable Energy Technologies and Assessments, 58, 103345. https://doi.org/10.1016/j.seta.2023.103345CrossRef

Susanth Kishna, R., Nanthagopal, K., Ashok, B., Srinath, R., Pranava Kumar, M., & Bhowmick, P. (2019). Investigation on pilot injection with low temperature combustion of Calophylluminophyllum biodiesel fuel in common rail direct injection diesel engine. Fuel, 258, 116144. https://doi.org/10.1016/j.fuel.2019.116144CrossRef

Vellaiyan, S. (2020). Combustion, performance and emission evaluation of a diesel engine fueled with soybean biodiesel and its water blends. Energy, 201, 117633. https://doi.org/10.1016/j.energy.2020.117633CrossRef

Yin, X., Li, W., Zhang, W., Lv, X., Yang, B., Wang, Y., & Zeng, K. (2022). Experimental analysis of the EGR rate and temperature impact on combustion and emissions characteristics in a heavy-duty NG engine. Fuel, 310, 122394. https://doi.org/10.1016/j.fuel.2021.122394CrossRef

Yousefi, A., Guo, H., Dev, S., Liko, B., & Lafrance, S. (2022). Effects of ammonia energy fraction and diesel injection timing on combustion and emissions of an ammonia/diesel dual-fuel engine. Fuel, 314, 122723. https://doi.org/10.1016/j.fuel.2021.122723CrossRef

Zhang, Q., & Wang, L. (2021). The effect of exhaust gas recirculation on NOx emissions in diesel engines: a review. Energy Reports, 7, 140–155. https://doi.org/10.1016/j.egyr.2020.09.027CrossRef

Zhang, L., Yang, L., Zhou, Q., Zhang, X., Xing, W., Wei, Y., Hu, M., Zhao, L., Toriba, A., Hayakawa, K., & Tang, N. (2020). Size distribution of particulate polycyclic aromatic hydrocarbons in fresh combustion smoke and ambient air: A review. Journal of Environmental Sciences, 88, 370–384. https://doi.org/10.1016/j.jes.2019.09.007CrossRef

Zhao, Z., Huang, Y., Yu, X., Guo, Z., Li, M., & Wang, T. (2022). Effect of brown gas (HHO) addition on combustion and emission in gasoline engine with exhaust gas recirculation (EGR) and gasoline direct injection. Journal of Cleaner Production, 360, 132078. https://doi.org/10.1016/j.jclepro.2022.132078CrossRef

Titel: Impact of Aluminum Nitrate and Graphene Oxide Nanoplate on Performance and Emission Characteristics of a CRDI Diesel Engine Powered by Industrial Leather Waste Fat Biodiesel
verfasst von: N. Mohanrajhu
S. Sekar
Ravikumar Jayabal
R. Sureshkumar
Publikationsdatum: 22.12.2024
Verlag: The Korean Society of Automotive Engineers
Erschienen in: International Journal of Automotive Technology
Print ISSN: 1229-9138
Elektronische ISSN: 1976-3832
DOI: https://doi.org/10.1007/s12239-024-00205-5

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

ATZelectronics worldwide

ATZelektronik