nach oben

Erschienen in:

16.04.2021 | Review Article

Impact of metal additive manufacturing parameters on the powder bed fusion and direct energy deposition processes: a comprehensive review

verfasst von: Nikolaos Kladovasilakis, Paschalis Charalampous, Ioannis Kostavelis, Dimitrios Tzetzis, Dimitrios Tzovaras

Erschienen in: Progress in Additive Manufacturing | Ausgabe 3/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Metal additive manufacturing (AM) has been recently acknowledged as a method to produce metal parts with complex geometries and unique characteristics. In general, metal AM components are used in applications where enhanced mechanical properties are required; thus it is essential to optimize the parameters that affect the metal AM processes. The immense advantages of metal AM technologies in the fields of production and manufacturing placed these technologies in the forefront of scientific sectors relevant to engineering, biomedical science and electronics. In recent years, many studies have been published analyzing the parameters which influence metal AM techniques to achieve advanced overall quality and optimized mechanical behavior of the fabricated products. Existing research has individually studied the influence of various factors on metal AM methods such as feedstock material properties, build orientation, printing conditions, infill patterns and post-processing procedures. The present study aims to review the research carried out until today identifying and classifying all parameters affecting metal AM, based on their impact on the quality of the final product. This survey intents to establish a process map of the categories which influence metal AM components. Additional recommendations, research gaps and directions towards the improvement of metal AM are also provided.

Vorheriger Artikel Editorial PIAM June 2021

Nächster Artikel Effect of Particle size of monomodal 316L powder on powder layer density in powder bed fusion

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Gibson I, Rosen DW, Stucker B (2010) Additive manufacturing technologies, 1st edn. Springer, New York. https://doi.org/10.1007/978-1-4939-2113-3CrossRef

Frazier WE (2010) Digital manufacturing of metallic components: vision and roadmap. In: Solid free form fabrication Proceedings. University of Texas at Austin, Austin TX, 717-732

Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23:1917–1928. https://doi.org/10.1007/s11665-014-0958-zCrossRef

González-Henríquez CM, Sarabia-Vallejos MA, Rodriguez-Hernandez J (2019) Polymers for additive manufacturing and 4D-printing: materials, methodologies, and biomedical applications. Prog Polym Sci 94:57–116. https://doi.org/10.1016/j.progpolymsci.2019.03.001CrossRef

Gausemeier J, Echterhoff N, Kokoschka M, Wall M (2012) Thinking ahead the future of additive manufacturing—analysis of promising industries. University of Paderborn Direct Manufacturing Research Centre, Paderborn, p 103

Kladovasilakis N, Tsongas K, Tzetzis D (2020) Finite element analysis of orthopedic hip implant with functionally graded bioinspired lattice structures. Biomimetics 5(3):44. https://doi.org/10.3390/biomimetics5030044CrossRef

Gebisa AW, Lemu HG (2017) A case study on topology optimized design for additive manufacturing. IOP Conf Ser Mater Sci Eng 276:12–26. https://doi.org/10.1088/1757-899x/276/1/012026CrossRef

Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ, Loh LE, Sing SL (2015) Review of selective laser melting: materials and applications. Appl Phys Rev 2:41–101. https://doi.org/10.1063/1.4935926CrossRef

ASTM F2792-12a (2012) Standard terminology for additive manufacturing technologies (Withdrawn, 2015). ASTM International, West Conshohocken. https://doi.org/10.1520/F2792-12ACrossRef

10.

Flynn JM, Shokrani A, Newman ST, Dhokia V (2016) Hybrid additive and subtractive machine tools—research and industrial developments. Int J Manuf Technol Manag (IJMTM) 101:79–101. https://doi.org/10.1016/j.ijmachtools.2015.11.007CrossRef

11.

ISO/ASTM52900-15 (2015) Standard terminology for additive manufacturing—general principles—terminology. ASTM International, West Conshohocken. https://doi.org/10.1520/ISOASTM52900-15CrossRef

12.

Charalampous P, Kostavelis I, Tzovaras D (2020) Non-destructive quality control methods in additive manufacturing: a survey. Rapid Prototyping J 26(4):777–790. https://doi.org/10.1108/RPJ-08-2019-0224CrossRef

13.

Fayazfar H, Salarian M, Rogalsky A, Sarker D, Russo P, Paserin V, Toyserkani E (2018) A critical review of powder-based additive manufacturing of ferrous alloys: process parameters, microstructure and mechanical properties. J Mater Des 144:98–128. https://doi.org/10.1016/j.matdes.2018.02.018CrossRef

14.

Villafuerte J (2015) Modern cold spray: materials, process, and applications. Springer, New York. https://doi.org/10.1007/978-3-319-67183-3CrossRef

15.

Bailey AC, Merriman A, Elliott A, Basti MM (2016) Preliminary testing of nanoparticle effectiveness in Binder Jetting applications. In: Proceedings of the 26th annual international solid freeform fabrication symposium—an additive manufacturing conference, pp 1069–1077

16.

Moylan S, Whitenton E, Lane B, Slotwinski J (2014) Infrared thermography for laser-based powder bed fusion additive manufacturing processes. AIP Conf Proc. https://doi.org/10.1063/1.4864956CrossRef

17.

Vock S, Klöden B, Kirchner A, Weißgärber T, Kieback B (2019) Powders for powder bed fusion: a review. Prog Addit Manuf 4:383–397. https://doi.org/10.1007/s40964-019-00078-6CrossRef

18.

Dass A, Moridi A (2019) State of the art in directed energy deposition: from additive manufacturing to materials design. Coatings 9:418. https://doi.org/10.3390/coatings9070418CrossRef

19.

Woensel RV, Oirschot TV, Burgmans M, Mohammadi M, Hermans K (2018) Printing architecture: an overview of existing and promising additive manufacturing methods and their application in the building industry. Int J Constr Environ 9:57–81. https://doi.org/10.18848/2154-8587/CGP/v09i01/57-81CrossRef

20.

DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, Beese AM, Wilson-Heid A, De A, Zhang W (2018) Additive manufacturing of metallic components—process, structure and properties. Prog Mater Sci 92:112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001CrossRef

21.

Gibson I, Rosen D, Brent S (2015) Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing, 2nd edn. Springer, New York. https://doi.org/10.1007/978-1-4939-2113-3CrossRef

22.

Prescott JK, Barnum RA (2000) On powder flowability. Pharm Technol 24:60–85

23.

ASTM ISO/ASTM52921-13 (2013) Standard terminology for additive manufacturing-coordinate systems and test methodologies. ASTM International, West Conshohocken. https://doi.org/10.1520/ISOASTM52921-13CrossRef

24.

Lewandowski JJ, Seifi M (2016) Metal additive manufacturing: a review of mechanical properties. Annu Rev Mater Res 46:151–186. https://doi.org/10.1146/annurev-matsci-070115-032024CrossRef

25.

Kok Y, Tan XP, Wang P, Nai MLS, Loh NH, Liu E, Tor SB (2018) Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review. J Mater Des 139:565–586. https://doi.org/10.1016/j.matdes.2017.11.021CrossRef

26.

Taufik M, Jain PK (2014) Role of build orientation in layered manufacturing: a review. Int J Manuf Technol Manag 27:47–73. https://doi.org/10.1504/IJMTM.2013.058637CrossRef

27.

Fotovvati B, Etesami SA, Asadi E (2019) Process-property-geometry correlations for additively-manufactured Ti-6Al-4V sheets. Mater Sci Eng A 760:431–447. https://doi.org/10.1016/j.msea.2019.06.020CrossRef

28.

Tang M, Pistorius PC, Beuth JL (2017) Prediction of lack-of-fusion porosity for powder bed fusion. J Addit Manuf 14:39–48. https://doi.org/10.1016/j.addma.2016.12.001CrossRef

29.

Calignano F, Manfredi D, Ambrosio EP, Iuliano L, Fino P (2013) Influence of process parameters on surface roughness of aluminium parts produced by DMLS. Int J Adv Manuf Technol 67:2743–2751. https://doi.org/10.1007/s00170-012-4688-9CrossRef

30.

Prasad HS, Brueckner F, Kaplan AFH (2020) Powder incorporation and spatter formation in high deposition rate blown powder directed energy deposition. Addit Manuf 35:101413. https://doi.org/10.1016/j.addma.2020.101413CrossRef

31.

Taminger KMB et al (2006) Electron beam freeform fabrication for cost effective near-net shape manufacturing. NATO AVT 139:16–21

32.

Ding D, Pan Z, Cuiuri D, Li H (2015) Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol 81:465–481. https://doi.org/10.1007/s00170-015-7077-3CrossRef

33.

Heralic A (2012) Monitoring and control of robotized laser metal wire deposition. Doctoral thesis, Chalmers University of Technology

34.

Gibson LJ, Ashby MF (1997) Cellular solids: structure and properties, 2nd edn. Cambridge University Press, CambridgeCrossRef

35.

Zhu F, Lu G, Ruan D, Wang Z (2010) Plastic deformation, failure and energy absorption of sandwich structures with metallic cellular cores. Int J Prot Struct 1:507–541. https://doi.org/10.1260/2041-4196.1.4.507CrossRef

36.

Al-Ketan O, Rowshan R, Al-Ruba RKA (2018) Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials. J Addit Manuf 19:167–183. https://doi.org/10.1016/j.addma.2017.12.006CrossRef

37.

Delcuse L, Bahi S, Gunputh U, Rusinek A, Wood P, Miguelez MH (2020) Effect of powder bed fusion laser melting process parameters, build orientation and strut thickness on porosity, accuracy and tensile properties of an auxetic structure in IN718 alloy. Addit Manuf 36:101339. https://doi.org/10.1016/j.addma.2020.101339CrossRef

38.

Sanz C, Navas VG (2013) Structural integrity of direct metal laser sintered parts subjected to thermal and finishing treatments. J Mater Process Technol 213:2126–2136. https://doi.org/10.1016/j.jmatprotec.2013.06.013CrossRef

39.

Qiu C, Adkins NJE, Attallah MM (2013) Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V. J Mater Sci Eng A 578:230–239. https://doi.org/10.1016/j.msea.2013.04.099CrossRef

40.

Mower TM, Long MJ (2015) Mechanical behaviour of additive manufactured, powder-bed laser-fused materials. J Mater Sci Eng A 651:198–213. https://doi.org/10.1016/j.msea.2015.10.068CrossRef

41.

Spierings AB, Voegtlin M, Bauer T, Wegener K (2016) Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing. Prog Addit Manuf 1:9–20. https://doi.org/10.1007/s40964-015-0001-4CrossRef

42.

Spierings AB, Herres N, Levy G (2011) Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts. Rapid Prototyping J 17:195–202. https://doi.org/10.1108/13552541111124770CrossRef

43.

Beitz S, Uerlich R, Bokelmann T, Diener A, Vietor T, Kwade A (2019) Influence of powder deposition on powder bed and specimen properties. Materials 12:127–146. https://doi.org/10.3390/ma12020297CrossRef

44.

Ziegelmeier S, Christou P, Wöllecke F, Tuck C, Goodridge R, Hague R, Krampe E, Wintermantel E (2015) An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties. J Mater Process Technol 215:239–250. https://doi.org/10.1016/j.jmatprotec.2014.07.029CrossRef

45.

Breinan EM, Kear BH (1983) Laser materials processing. North-Holland, Publishing Co., Amsterdam, p 235CrossRef

46.

Brandl E, Schoberth A, Leyens C (2011) Morphology, microstructure, and hardness of titanium (Ti6Al4V) blocks deposited by wire-feed additive layer manufacturing (ALM). Mater Sci Eng A Struct Mater Prop Microstruct Process 532:295–307. https://doi.org/10.1016/j.msea.2011.10.095CrossRef

47.

Syed WUH, Pinkerton AJ, Li L (2005) A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping. J Appl Surf Sci 247:268–276. https://doi.org/10.1016/j.apsusc.2005.01.138CrossRef

48.

Schaub DA, Chu KR, Montgomery DC (1997) Optimizing stereolithography throughput. J Manuf Syst 16(4):290–303. https://doi.org/10.1016/S0278-6125(97)89099-1CrossRef

49.

Kattethota G, Henderson M (1998) A visual tool to improve layered manufacturing part quality. In: Proceedings of the solid freeform fabrication symposium, Austin, Texas. https://doi.org/10.26153/tsw/616

50.

Vasudevarao B, Natarajan DP, Handerson M (2000) Sensitivity of RP surface finish to process parameters variation. In: Solid freeform fabrication Proceedings.

51.

Delgado J, Ciurana J, Rodríguez CA (2012) Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials. Int J Adv Manuf Technol 60:601–610. https://doi.org/10.1007/s00170-011-3643-5CrossRef

52.

Mertens A, Reginster S, Contrepois Q, Dormal T, Lemaire O, Lecomte-Beckers J (2014) Microstructures and mechanical properties of stainless steel AISI 316L processed by selective laser melting. Mater Sci Forum 783–786:898–903CrossRef

53.

Simonelli M, Tse YY, Tuck C (2014) Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6A1-4V. J Mater Sci Eng A 616:1–11. https://doi.org/10.1016/j.msea.2014.07.086CrossRef

54.

Abd-Elghany K, Bourell DL (2012) Property evaluation of 304L stainless steel fabricated by selective laser melting. Rapid Prototyping J 18:420–428. https://doi.org/10.1108/13552541211250418CrossRef

55.

Ghayoor M, Lee K, He Y, Chang C, Paul BK, Pasebani S (2019) Selective laser melting of 304L stainless steel: role of volumetric energy density on the microstructure. Texture and mechanical properties. J Addit Manuf 32:101–111. https://doi.org/10.1016/j.addma.2019.101011CrossRef

56.

Mohammadi M, Asgari H (2017) Achieving low surface roughness AlSi10Mg-200C parts using direct metal laser sintering. J Addit Manuf 20:23–32. https://doi.org/10.1016/j.addma.2017.12.012CrossRef

57.

Zhang LC, Klemm D, Eckert J, Hao YL, Sercombe TB (2011) Manufacture by selective laser melting and mechanical behaviour of a biomedical Ti-24Nb-4Zr-8Sn alloy. Scr Mater 65:21–24. https://doi.org/10.1016/j.scriptamat.2011.03.024CrossRef

58.

Arasu IV, Chockalingam K, Kailasanathan C, Sivabharathy M (2014) Optimization of surface roughness in selective laser sintered stainless steel parts. Int J ChemTech Res 6:2993–2999

59.

Pal S, Tiyyagur HR, Drstvenšek I, Kumar CS (2016) The effect of post-processing and machining process parameters on properties of stainless steel PH1 product produced by direct metal laser sintering. Procedia Eng 149:359–365. https://doi.org/10.1016/j.proeng.2016.06.679CrossRef

60.

Fotovvati B, Balasubramanian M, Asadi E (2020) Modeling and optimization approaches of laser-based powder-bed fusion process for Ti-6Al-4V alloy. Coatings 10:1104. https://doi.org/10.3390/coatings10111104CrossRef

61.

Attarzadeh F, Fotovvati B, Fitzmire M, Asadi E (2020) Surface roughness and densification correlation for direct metal laser sintering. Int J Adv Manuf Technol 107:2833–2842. https://doi.org/10.1007/s00170-020-05194-0CrossRef

62.

Gong H, Rafi K, Gu H, Starr T, Stucker B (2014) Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes. J Addit Manuf 1–4:87–98. https://doi.org/10.1016/j.addma.2014.08.002CrossRef

63.

Lee HJ, Kim HK, Hong HU, Lee BS (2019) Influence of the focus offset on the defects, microstructure, and mechanical properties of an Inconel 718 superalloy fabricated by electron beam additive manufacturing. J Alloy Compd 781:842–856. https://doi.org/10.1016/j.jallcom.2018.12.070CrossRef

64.

Rossi S, Deflorian F, Venturini F (2004) Improvement of surface finishing and corrosion resistance of prototypes produced by direct metal laser sintering. J Mater Process Technol 148(3):301–309. https://doi.org/10.1016/j.jmatprotec.2003.02.001CrossRef

65.

Brinksmeier E, Levy G, Meyer D, Spierings AB (2010) Surface integrity of selective-laser-melted components. CIRP Ann 59(1):601–606. https://doi.org/10.1016/j.cirp.2010.03.131CrossRef

66.

Badrossamay M, Yasa E, Vaerenbergh JV, Kruth J (2009) Improving productivity rate in SLM of commercial steel powders. Technical paper—Society of Manufacturing Engineers TP09PUB17

67.

Milewski JO, Lewis GK, Thoma DJ, Keel GI, Nemec RB, Reinert RA (1998) Directed light fabrication of a solid metal hemisphere using 5-axis powder deposition. J Mater Process Technol 75(1–3):165–172. https://doi.org/10.1016/S0924-0136(97)00321-XCrossRef

68.

Xue L, Islam MU (2006) Laser consolidation—a one-step manufacturing process for making net-shaped functional aerospace components. SAE Tech Pap. https://doi.org/10.4271/2006-01-3163CrossRef

69.

Mumtaz K, Hopkinson N (2009) Top surface and side roughness of Inconel 625 parts processed using selective laser melting. Rapid Prototyping J 15:96–103. https://doi.org/10.1108/13552540910943397CrossRef

70.

Mumtaz K, Hopkinson N (2010) Selective laser melting of thin wall parts using pulse shaping. J Mater Process Technol 210(2):279–287. https://doi.org/10.1016/j.jmatprotec.2009.09.011CrossRef

71.

Xu F, Madhaven N, Dhokia V, McAndrew AR, Colegrove PA, Williams S, Henstridge A, Newman ST (2016) Multi-sensor system for wire-fed additive manufacture of titanium alloys. In: 26th international conference on flexible automation and intelligent manufacturing

72.

Senthilkumaran K, Pandey PM, Rao PVM (2009) Influence of building strategies on the accuracy of parts in selective laser sintering. J Mater Des 30(8):2946–2954. https://doi.org/10.1016/j.matdes.2009.01.009CrossRef

73.

Ratnadeep P, Anand S (2011) Optimal part orientation in rapid manufacturing process for achieving geometric tolerances. J Manuf Syst 30(4):214–222. https://doi.org/10.1016/j.jmsy.2011.07.010CrossRef

74.

Tang Y, Loha HT, Wong YS, Fuh JYH, Lu L, Wang X (2003) Direct laser sintering of a copper-based alloy for creating three-dimensional metal parts. J Mater Process Technol 140(1–3):368–372. https://doi.org/10.1016/S0924-0136(03)00766-0CrossRef

75.

Fotovvati B, Asadi E (2019) Size effects on geometrical accuracy for additive manufacturing of Ti-6Al-4V ELI parts. Int J Adv Manuf Technol 104:2951–2959. https://doi.org/10.1007/s00170-019-04184-1CrossRef

76.

Charles A, Elkaseer A, Mueller T, Thijs L, Hagenmeyer V, Scholz S (2018) Effect of process parameters on dimensional accuracy of down-facing surfaces in selective laser melting of Ti6Al4V. In: ASPE and euspen summer topical meeting—advancing precision in additive manufacturing.

77.

Zhang L, Zhang S, Zhu H, Hu Z, Wang G, Zeng X (2018) Horizontal dimensional accuracy prediction of selective laser melting. J Mater Des 160:9–20. https://doi.org/10.1016/j.matdes.2018.08.059CrossRef

78.

Liu B, Wildman R, Tuck C, Ashcroft I, Hague R (2011) Investigation the effect of particle size distribution on processing parameters optimisation in selective laser melting process. In: 22nd annual international solid freeform fabrication symposium—an additive manufacturing conference, SFF

79.

Strondl A, Lyckfeldt O, Brodin H, Ackelid U (2015) Characterization and control of powder properties for additive manufacturing. JΟΜ 67:549–554. https://doi.org/10.1007/s11837-015-1304-0CrossRef

80.

Alcisto J, Enriquez A, Garcia H, Hinkson S, Steelman T, Silverman E, Valdovino P, Gigerenzer H, Foyos J, Ogren J, Dorey J, Karg K, McDonald T, Es-Said OS (2011) Tensile properties and microstructures of laser-formed Ti-6Al-4V. J Mater Eng Perform 20:203–212. https://doi.org/10.1007/s11665-010-9670-9CrossRef

81.

Wang P, Nai MLS, Tan XP, Sin WJ, Tor SB, Wei J (2016) Anisotropic mechanical properties in a big-sized Ti-6Al-4V plate fabricated by electron beam melting. In: The minerals, Metals and Materials Society (eds) TMS 145th annual meeting and exhibition, Springer, Cham. https://doi.org/10.1007/978-3-319-48254-5_1

82.

Vilaro T, Colin C, Bartout JD (2011) As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. J Metall Mater Trans A 42:3190–3199. https://doi.org/10.1007/s11661-011-0731-yCrossRef

83.

Carroll BE, Palmer TA, Beese AM (2015) Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing. Acta Mater 87:309–320. https://doi.org/10.1016/j.actamat.2014.12.054CrossRef

84.

Svensson M, Ackelid U, Ab A (2009) Titanium alloys manufactured with electron beam melting mechanical and chemical properties. Proc MPMD 2009:189–194

85.

Seifi M, Dahar M, Aman R, Harrysson O, Beuth J, Lewandowski JJ (2015) Evaluation of orientation dependence of fracture toughness and fatigue crack propagation behaviour of as-deposited ARCAM EBM Ti-6Al-4V. JOM 67:597–607. https://doi.org/10.1007/s11837-015-1298-7CrossRef

86.

Jain PK, Pandey PM, Rao PVM (2009) Effect of delay time on part strength in selective laser sintering. Int J Adv Manuf Technol 43:117. https://doi.org/10.1007/s00170-008-1682-3CrossRef

87.

Köhler M, Fiebig S, Hensel J, Dilger K (2019) Wire and arc additive manufacturing of aluminium components. Metals 9:608. https://doi.org/10.3390/met9050608CrossRef

88.

Kasperovich G, Haubrich J, Gussone J, Requena G (2016) Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting. J Mater Des 105:160–170. https://doi.org/10.1016/j.matdes.2016.05.070CrossRef

89.

Mukherjee T, Zuback J, De A, DebRoy T (2016) Printability of alloys for additive manufacturing. Sci Rep 6:19717. https://doi.org/10.1038/srep19717CrossRef

90.

Mukherjee T, DebRoy T (2018) Mitigation of lack of fusion defects in powder bed fusion additive manufacturing. J Manuf Process 36:442–449. https://doi.org/10.1016/j.jmapro.2018.10.028CrossRef

91.

Liverani E, Toschi S, Ceschini L, Fortunato A (2017) Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel. J Mater Process Technol 249:255–263. https://doi.org/10.1016/j.jmatprotec.2017.05.042CrossRef

92.

Georgilas K, Khan RHU, Kartal ME (2020) The influence of pulsed laser powder bed fusion process parameters on Inconel 718 material properties. Mater Sci Eng A 769:138527. https://doi.org/10.1016/j.msea.2019.138527CrossRef

93.

Wang L, Pratt P, Felicelli S, Kadiri H, Berry J, Wang P, Horstemeyer M (2009) Pore formation in laser-assisted powder deposition process. J Manuf Sci Eng 131:51–60. https://doi.org/10.1115/1.3184087CrossRef

94.

Wang Z, Palmer TA, Beese AM (2016) Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing. Acta Mater 110:226–235. https://doi.org/10.1016/j.actamat.2016.03.019CrossRef

95.

Zhang K, Wang S, Liu W, Shang X (2014) Characterization of stainless steel parts by laser metal deposition shaping. J Mater Des 55:104–119. https://doi.org/10.1016/j.matdes.2013.09.006CrossRef

96.

Hall EO (1951) The deformation and ageing of mild steel: III discussion of results. Proc Phys Soc Lond Sect B 64:747–753. https://doi.org/10.1088/0370-1301/64/9/303CrossRef

97.

Petch NJ (1953) The cleavage strength of polycrystals. J Iron Steel Inst 174:25–28

98.

Bauer J, Meza LR, Schaedler TA, Schwaiger R, Zheng X, Valdevit L (2017) Nanolattices: an emerging class of mechanical metamaterials. J Adv Mater. https://doi.org/10.1002/adma.201701850CrossRef

99.

Al-Ketan O, Rezgui R, Rowshan R, Du H, Fang NX, Al-Rub RKA (2018) Microarchitected stretching-dominated mechanical metamaterials with minimal surface topologies. J Adv Eng Mater 20:1800029. https://doi.org/10.1002/adem.201800029CrossRef

100.

Liu S, Shin YC (2019) Additive manufacturing of Ti6Al4V alloy: a review. Mater Des 164:107552. https://doi.org/10.1016/j.matdes.2018.107552CrossRef

101.

Popovich AA, Sufiiarov VS, Polozov IA, Borisov EV (2015) Microstructure and mechanical properties of Inconel 718 produced by SLM and subsequent heat treatment. Key Eng Mater 651–653:665–670CrossRef

102.

Ma P, Prashanth KG, Scudino S, Jia Y, Wang H, Zou C, Wei Z, Eckert J (2014) Influence of annealing on mechanical properties of Al-20Si processed by selective laser melting. Metals 4:28–36. https://doi.org/10.3390/met4010028CrossRef

103.

Molaei R, Fatemi A, Phan N (2020) Multiaxial fatigue of LB-PBF additive manufactured 17-4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy. Int J Fatigue 137:105646. https://doi.org/10.1016/j.ijfatigue.2020.105646CrossRef

104.

Sanaei N, Fatemi A (2020) Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals. Theor Appl Fract Mech 108:102638. https://doi.org/10.1016/j.tafmec.2020.102638CrossRef

105.

Lorenz KA, Jones JB, Wimpenny DI, Jackson MR (2015) A review of hybrid manufacturing. In: 26th solid freeform fabrication symposium conference Proceedings

106.

Chen Z, Xie YM, Wu X, Wang Z, Li Q, Zhou S (2019) On hybrid cellular materials based on triply periodic minimal surfaces with extreme mechanical properties. J Mater Des 183:108109. https://doi.org/10.1016/j.matdes.2019.108109CrossRef

Titel: Impact of metal additive manufacturing parameters on the powder bed fusion and direct energy deposition processes: a comprehensive review
verfasst von: Nikolaos Kladovasilakis
Paschalis Charalampous
Ioannis Kostavelis
Dimitrios Tzetzis
Dimitrios Tzovaras
Publikationsdatum: 16.04.2021
Verlag: Springer International Publishing
Erschienen in: Progress in Additive Manufacturing / Ausgabe 3/2021
Print ISSN: 2363-9512
Elektronische ISSN: 2363-9520
DOI: https://doi.org/10.1007/s40964-021-00180-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2021

Design and manufacture of a custom ankle–foot orthoses using traditional manufacturing and fused deposition modeling

Effect of residual stress on fatigue strength of 316L stainless steel produced by laser powder bed fusion process

Effect of bimodal powder blends on part density and melt pool fluctuation in laser powder bed fusion

Current progress of 4D-printing technology

AA5083 (Al–Mg) plates produced by wire-and-arc additive manufacturing: effect of specimen orientation on microstructure and tensile properties

Effects on the distortion of Inconel 718 components along a hybrid laser-based additive manufacturing process chain using laser powder bed fusion and laser metal deposition

Premium Partner

Marktübersichten