Skip to main content
Erschienen in: Metallurgical and Materials Transactions B 1/2020

01.11.2019

Impact of the Electromagnetic Brake Position on the Flow Structure in a Slab Continuous Casting Mold: An Experimental Parameter Study

verfasst von: Dennis Schurmann, Ivan Glavinić, Bernd Willers, Klaus Timmel, Sven Eckert

Erschienen in: Metallurgical and Materials Transactions B | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Flow measurements are performed in a slab model for continuous casting of steel under the influence of a ruler type Electromagnetic Brake (EMBr). The Mini-LIMMCAST facility utilizes the low melting GaInSn alloy for flow modeling. Two-dimensional velocity distributions in the center plane of the rectangular mold with a cross section of \(300 \times 35\,\hbox {mm}^{2}\) are determined by means of the ultrasound Doppler velocimetry. This study especially focuses on the influence of the vertical position of the EMBr and its magnetic flux density as well as the effect of different immersion depths of the submerged entry nozzle. The horizontal flow velocity just below the free surface can effectively be reduced by choosing an optimal position of the EMBr, while an improper positioning even increases the near-surface velocity compared to the case without activated brake. A general braking effect of the EMBr on the submerged jet is not observed. The decisive mechanism for controlling the near-surface flow results from a modification of the jet geometry and a reorganization of the flow field. In terms of an effective flow control an appropriate positioning of the EMBr has at least the same significance as the regulation of the magnetic field strength.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat L. C. Hibbeler and B. G. Thomas: Iron Steel Technol., 2013, vol. 10 , pp. 121–136. L. C. Hibbeler and B. G. Thomas: Iron Steel Technol., 2013, vol. 10 , pp. 121–136.
2.
3.
4.
Zurück zum Zitat J. Kubota, N. Kubo, T. Ishii, M. Suzuki, N. Aramaki and R. Nishimachi: NKK Technical Review, 2001, vol. 85 p. 9. J. Kubota, N. Kubo, T. Ishii, M. Suzuki, N. Aramaki and R. Nishimachi: NKK Technical Review, 2001, vol. 85 p. 9.
5.
Zurück zum Zitat C. Ji, J. Li, H. Tang and S. Yang: Steel Res. Int., 2013, vol. 84, pp. 259–268.CrossRef C. Ji, J. Li, H. Tang and S. Yang: Steel Res. Int., 2013, vol. 84, pp. 259–268.CrossRef
6.
Zurück zum Zitat S.-M. Cho, S.-H. Kim and B. G. Thomas: ISIJ Int., 2014, vol. 54, pp. 845–854.CrossRef S.-M. Cho, S.-H. Kim and B. G. Thomas: ISIJ Int., 2014, vol. 54, pp. 845–854.CrossRef
7.
Zurück zum Zitat S.-W. Han, H.-J. Cho, S.-Y. Jin, M. Sedén, I.-B. Lee and I. Sohn: Metall. Mater. Trans. B, 2018, vol. 49, pp. 2757–2769.CrossRef S.-W. Han, H.-J. Cho, S.-Y. Jin, M. Sedén, I.-B. Lee and I. Sohn: Metall. Mater. Trans. B, 2018, vol. 49, pp. 2757–2769.CrossRef
8.
Zurück zum Zitat T. Zhang, J. Yang and P. Jiang: Metals, 2019, vol. 9, p. 36.CrossRef T. Zhang, J. Yang and P. Jiang: Metals, 2019, vol. 9, p. 36.CrossRef
9.
Zurück zum Zitat J. Szekely and R. T. Yadoya: Metall. Trans., 1972, vol. 3, pp. 2673–2680.CrossRef J. Szekely and R. T. Yadoya: Metall. Trans., 1972, vol. 3, pp. 2673–2680.CrossRef
10.
Zurück zum Zitat H.-J. Odenthal, H. Pfeifer, I. Lemanowicz and R. Gorissen: Metall. Mater. Trans. B, 2002, vol. 33, pp. 163–172.CrossRef H.-J. Odenthal, H. Pfeifer, I. Lemanowicz and R. Gorissen: Metall. Mater. Trans. B, 2002, vol. 33, pp. 163–172.CrossRef
11.
Zurück zum Zitat Y. Miki and S. Takeuchi: ISIJ Int., 2003, vol. 43, pp. 1548–1555.CrossRef Y. Miki and S. Takeuchi: ISIJ Int., 2003, vol. 43, pp. 1548–1555.CrossRef
12.
Zurück zum Zitat Y. J. Jeon, H. J. Sung and S. Lee: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 121–130.CrossRef Y. J. Jeon, H. J. Sung and S. Lee: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 121–130.CrossRef
13.
Zurück zum Zitat A. Idogawa, M. Sugizawa, S. Takeuchi, K. Sorimachi and T. Fujii: Materials Science and Engineering: A, 1993, vol. 173, pp. 293–297.CrossRef A. Idogawa, M. Sugizawa, S. Takeuchi, K. Sorimachi and T. Fujii: Materials Science and Engineering: A, 1993, vol. 173, pp. 293–297.CrossRef
14.
Zurück zum Zitat K. Okazawa, I. Sawada, H. Harada, T. Toh and E. Takeuchi: Tetsu-to-Hagane, 1998, vol. 84, pp. 490–495.CrossRef K. Okazawa, I. Sawada, H. Harada, T. Toh and E. Takeuchi: Tetsu-to-Hagane, 1998, vol. 84, pp. 490–495.CrossRef
15.
Zurück zum Zitat H. Harada, T. Toh, T. Ishii, K. Kaneko and E. Takeuchi: ISIJ Int., 2001, vol. 41, pp. 1236–1244.CrossRef H. Harada, T. Toh, T. Ishii, K. Kaneko and E. Takeuchi: ISIJ Int., 2001, vol. 41, pp. 1236–1244.CrossRef
16.
Zurück zum Zitat K. Timmel, S. Eckert and G. Gerbeth: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 68–80.CrossRef K. Timmel, S. Eckert and G. Gerbeth: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 68–80.CrossRef
17.
Zurück zum Zitat Z.-Q. Zhang, J.-B. Yu, Z.-M. Ren and K. Deng: Adv. Manuf., 2015, vol. 3, pp. 212–220.CrossRef Z.-Q. Zhang, J.-B. Yu, Z.-M. Ren and K. Deng: Adv. Manuf., 2015, vol. 3, pp. 212–220.CrossRef
18.
Zurück zum Zitat Z. Yu, Z.-Q. Zhang and Z.-M. Ren: Adv. Manuf., 2017, vol. 5, pp. 271–278.CrossRef Z. Yu, Z.-Q. Zhang and Z.-M. Ren: Adv. Manuf., 2017, vol. 5, pp. 271–278.CrossRef
19.
Zurück zum Zitat K. H. Moon, H. K. Shin, B. J. Kim, J. Y. Chung, Y. S. Hwang and J. K. Yoon: ISIJ Int., 1996, vol. 36, pp. S201–S203.CrossRef K. H. Moon, H. K. Shin, B. J. Kim, J. Y. Chung, Y. S. Hwang and J. K. Yoon: ISIJ Int., 1996, vol. 36, pp. S201–S203.CrossRef
20.
Zurück zum Zitat Y.-S. Hwang, P.-R. Cha, H.-S. Nam, K.-H. Moon and J.-K. Yoon: ISIJ Int., 1997, vol. 37, pp. 659–667.CrossRef Y.-S. Hwang, P.-R. Cha, H.-S. Nam, K.-H. Moon and J.-K. Yoon: ISIJ Int., 1997, vol. 37, pp. 659–667.CrossRef
21.
Zurück zum Zitat Y. Haiqi, W. Baofeng, L. Huiqin and L. Jianchao: Journal of Materials Processing Technology, 2008, vol. 202, pp. 179–187.CrossRef Y. Haiqi, W. Baofeng, L. Huiqin and L. Jianchao: Journal of Materials Processing Technology, 2008, vol. 202, pp. 179–187.CrossRef
22.
Zurück zum Zitat S. Garcia-Hernandez, R. D. Morales and E. Torres-Alonso: Ironmaking Steelmaking, 2010, vol. 37, pp. 360–368.CrossRef S. Garcia-Hernandez, R. D. Morales and E. Torres-Alonso: Ironmaking Steelmaking, 2010, vol. 37, pp. 360–368.CrossRef
23.
Zurück zum Zitat X. Miao, K. Timmel, D. Lucas, Z. Ren, S. Eckert and G. Gerbeth: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 954–972.CrossRef X. Miao, K. Timmel, D. Lucas, Z. Ren, S. Eckert and G. Gerbeth: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 954–972.CrossRef
24.
Zurück zum Zitat R. Chaudhary, B. G. Thomas and S. P. Vanka: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 532–553.CrossRef R. Chaudhary, B. G. Thomas and S. P. Vanka: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 532–553.CrossRef
25.
Zurück zum Zitat R. Singh, B. G. Thomas and S. P. Vanka: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 1201–1221.CrossRef R. Singh, B. G. Thomas and S. P. Vanka: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 1201–1221.CrossRef
26.
Zurück zum Zitat B. G. Thomas, R. Singh, S. P. Vanka, K. Timmel, S. Eckert and G. Gerbeth: J. Manuf. Sci. Prod., 2015, vol. 15, pp. 93–104. B. G. Thomas, R. Singh, S. P. Vanka, K. Timmel, S. Eckert and G. Gerbeth: J. Manuf. Sci. Prod., 2015, vol. 15, pp. 93–104.
27.
Zurück zum Zitat Z. Liu, A. Vakhrushev, M. Wu, E. Karimi-Sibaki, A. Kharicha, A. Ludwig and B. Li: Metals, 2018, vol. 8, p. 609.CrossRef Z. Liu, A. Vakhrushev, M. Wu, E. Karimi-Sibaki, A. Kharicha, A. Ludwig and B. Li: Metals, 2018, vol. 8, p. 609.CrossRef
28.
Zurück zum Zitat C.Y. Ho and T.K. Chu: Electrical Resistivity and Thermal Conductivity of Nine Selected AISI Stainless Steels. Technical Report 45, Cindas, Purdue University, West Lafayette, 1977. C.Y. Ho and T.K. Chu: Electrical Resistivity and Thermal Conductivity of Nine Selected AISI Stainless Steels. Technical Report 45, Cindas, Purdue University, West Lafayette, 1977.
29.
Zurück zum Zitat I. Jimbo and A. W. Cramb: Metall. Trans. B, 1993, vol. 24, pp. 5–10.CrossRef I. Jimbo and A. W. Cramb: Metall. Trans. B, 1993, vol. 24, pp. 5–10.CrossRef
30.
Zurück zum Zitat M. Korolczuk-Hejnak, P. Migas and W. Ślęzak: J.Phys.: Conf. Ser., 2015, vol. 602, p. 012 037.CrossRef M. Korolczuk-Hejnak, P. Migas and W. Ślęzak: J.Phys.: Conf. Ser., 2015, vol. 602, p. 012 037.CrossRef
31.
Zurück zum Zitat Z. Li, K. Mukai, M. Zeze and K. C. Mills: J. Mater. Sci., 2005, vol. 40, pp. 2191–2195.CrossRef Z. Li, K. Mukai, M. Zeze and K. C. Mills: J. Mater. Sci., 2005, vol. 40, pp. 2191–2195.CrossRef
32.
Zurück zum Zitat Y. Plevachuk, V. Sklyarchuk, S. Eckert, G. Gerbeth and R. Novakovic: J. Chem. Eng. Data, 2014, vol. 59, pp. 757–763.CrossRef Y. Plevachuk, V. Sklyarchuk, S. Eckert, G. Gerbeth and R. Novakovic: J. Chem. Eng. Data, 2014, vol. 59, pp. 757–763.CrossRef
33.
Zurück zum Zitat VDI, editor: VDI-Wärmeatlas, 11th edn., Springer, Berlin, 2013. VDI, editor: VDI-Wärmeatlas, 11th edn., Springer, Berlin, 2013.
34.
Zurück zum Zitat K. Timmel, S. Eckert, G. Gerbeth, F. Stefani and T. Wondrak: ISIJ Int., 2010, vol. 50, pp. 1134–1141.CrossRef K. Timmel, S. Eckert, G. Gerbeth, F. Stefani and T. Wondrak: ISIJ Int., 2010, vol. 50, pp. 1134–1141.CrossRef
35.
Zurück zum Zitat K. Timmel, C. Kratzsch, A. Asad, D. Schurmann, R. Schwarze and S. Eckert: IOP Conf. Ser.: Mater. Sci. Eng., 2017, vol. 228 p. 012 019.CrossRef K. Timmel, C. Kratzsch, A. Asad, D. Schurmann, R. Schwarze and S. Eckert: IOP Conf. Ser.: Mater. Sci. Eng., 2017, vol. 228 p. 012 019.CrossRef
36.
Zurück zum Zitat Y. Takeda: Nuclear Engineering and Design, 1991, vol. 126, pp. 277–284.CrossRef Y. Takeda: Nuclear Engineering and Design, 1991, vol. 126, pp. 277–284.CrossRef
37.
Zurück zum Zitat S. Eckert, A. Cramer and G. Gerbeth: in R. Moreau, editor, Magnetohydrodynamics, vol. 80, Springer Netherlands, Dordrecht, 2007, , pp. 275–294.CrossRef S. Eckert, A. Cramer and G. Gerbeth: in R. Moreau, editor, Magnetohydrodynamics, vol. 80, Springer Netherlands, Dordrecht, 2007, , pp. 275–294.CrossRef
38.
Zurück zum Zitat Evonik Industries AG: Technical Information PLEXIGLAS®, Evonik Industries AG, Essen, 2013. Evonik Industries AG: Technical Information PLEXIGLAS®, Evonik Industries AG, Essen, 2013.
39.
Zurück zum Zitat N. B. Morley, J. Burris, L. C. Cadwallader and M. D. Nornberg: Rev. Sci. Instrum., 2008, vol. 79, p. 056 107. N. B. Morley, J. Burris, L. C. Cadwallader and M. D. Nornberg: Rev. Sci. Instrum., 2008, vol. 79, p. 056 107.
40.
Zurück zum Zitat J. Krautkrämer and H. Krautkrämer: Werkstoffprüfung mit Ultraschall, 5th ed., Springer, Berlin, Heidelberg, 1986.CrossRef J. Krautkrämer and H. Krautkrämer: Werkstoffprüfung mit Ultraschall, 5th ed., Springer, Berlin, Heidelberg, 1986.CrossRef
41.
Zurück zum Zitat Signal Processing S.A.: DOP3000-3010 Series User’s Manual, Switzerland, 2017. Signal Processing S.A.: DOP3000-3010 Series User’s Manual, Switzerland, 2017.
42.
Zurück zum Zitat B. Li and F. Tsukihashi: ISIJ Int., 2006, vol. 46, pp. 1833–1838.CrossRef B. Li and F. Tsukihashi: ISIJ Int., 2006, vol. 46, pp. 1833–1838.CrossRef
Metadaten
Titel
Impact of the Electromagnetic Brake Position on the Flow Structure in a Slab Continuous Casting Mold: An Experimental Parameter Study
verfasst von
Dennis Schurmann
Ivan Glavinić
Bernd Willers
Klaus Timmel
Sven Eckert
Publikationsdatum
01.11.2019
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions B / Ausgabe 1/2020
Print ISSN: 1073-5615
Elektronische ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-019-01721-x

Weitere Artikel der Ausgabe 1/2020

Metallurgical and Materials Transactions B 1/2020 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.