nach oben

Metallurgist

Erschienen in:

01.07.2022

Improvement of the Function of Blast-Furnace Air Tuyeres

verfasst von: K. V. Goloshchapov, O. A. Kobelev, A. E. Titlyanov, P. V. Borisov, P. S. Makarov, O. N. Chicheneva

Erschienen in: Metallurgist | Ausgabe 1-2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This article discusses the main ways of improving the operation of blast-furnace air tuyeres: increasing the service life by applying protective coatings and changing the tuyere design to intensify its cooling with water, reducing heat losses through the surface by thermal insulation, and increasing the completeness of fuel combustion in the air passage.

Vorheriger Artikel Phase Transformation during Metallothermic Reduction of Tantalite

Nächster Artikel Topographic Contour Element Features in Patterned Macrostructures of the 18th Century Persian Bulat Steel

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Hae-Yang Lee, Patent 2543582 RF, IPC S21V7/16. Blast Tuyere for Cast Iron Production, No. 2013134266/02; submitted 08/02/2011; published 03/10/2015, Bull. No. 7.

V. V. Veter, M. I. Samoilov, Yu. A. Karanik et al., Patent 2299243 RF, IPC S21V7/16. Blast Furnace Tuyere, No. 2006100570/02; submitted 01/01/2006; published 05/20/2007, Bull. No. 14.

K. P. Shtriker, I. Witte, and R Altland, Patent 2221975 RF, IPC S21V7/16. Blast Tuyere for Shaft Furnaces, in: Particular for Blast Furnaces and Cupolas with Hot Blast, 2001117505/02; submitted 01/20/2000; published 01/20/2004, Bull. No. 2.

L. A. Zainullin, R. L. Zainullin, A. V. Bychkov et al., Patent 2460806 RF, IPC S21V7/16. Blast Furnace Tuyere, 2011117649/02; submitted 05/03/2011; published 09/10/2012, Bull. No. 25.

A. G. Radyuk and A. E. Titlyanov, “Blast-furnace lances with a gas-thermal aluminum coating,” Steel Transl., 41(10), 819–822 (2011); https://doi.org/10.3103/S0967091211100172.CrossRef

A. V. Golovanov, A. G. Radyuk, V. I. Slavov, V. P. Baranov, A. E. Titlyanov, and Yu. Z. Kul’mamet’eva, “Structure and phase composition of the surface layer on steel after alitization,” Metal Sci. Heat Treat, 50(5–6), 300–302 (2008); https://doi.org/10.1007/s11041-008-9039-y.CrossRef

A. Yu. Zarapin, S. E. Stanishevskij, and A. N. Chichenev, “Continuous line for producing strips with a gas-thermal coating made of nickel alloys,” Tyazh. Mashinostr., No. 6, 21–25 (1999).

Yu. I. Larin, I. S. Yarikov, V. N. Grigoriev et al., Patent 2153001 RF, IPC S21 7/16. Blast-Furnace Tuyere, 99115867/02; submitted 07/21/1999; published 07/20/2000, Bull. No. 20.

A. G. Radyuk, N. V. Androsov, A. F. Kopylov, A. E. Glebovskii, V. M. Mazurov, and S. P. Bokarev, “Recovery of molds by applying gas-thermal coatings,” Stal’, No. 7, 22–26 (1998).

10.

S. M. Gorbatyuk, A. A. Gerasimova, and A. G. Radyuk, “Using the coating for the diffusion layer obtaining on the walls of the mold (CCM),” Metall. Mining Ind., 7(9), 1085–1088 (2015).

11.

A. A. Gerasimova and A. G. Radyuk, “The improvement of the surface quality of workpieces by coating,” CIS Iron Steel Rev., No. 9, 33–35 (2014).

12.

A. A. Gerasimova, A. G. Radyuk, and L. M. Glukhov,” Applying coatings to the narrow walls of continuous caster molds to improve the quality of the surface of slabs,” Metallurgist, 58(5–6), 397–400 (2014); https://doi.org/10.1007/s11015-014-9922-2.CrossRef

13.

S. P. Eron’ko, V. L. Danilov, A. V. Kuklev, M. Y. Tkachev, V. V. Tinyakov, and S. V. Mechik, “Experience of design and industrial application of systems for the driven feed of slag-forming mixtures into the crystallizers of slab CCM,” Metallurgist, 64(3–4), 214–222 (2020); https://doi.org/10.1007/s11015-020-00986-x.CrossRef

14.

A. A. Gerasimova, A. G. Radyuk, and A. Yu. Zarapin, “The calculation of the thickness of thermal spray coating for protection of low alloyed steel when heated under rolling,” Mater. Sci. Forum, 2018.945MSF, 729–734; DOI https://doi.org/10.4028/www.scientific.net/MSF.945.729.

15.

A. G. Radyuk and A. A. Gerasimova, “Development of a method for calculating the thickness of thermal-spray aluminum coating used to protect low-alloy steel during heating for rolling,” Metallurgist, 62(1–2), 176–180 (2018); https://doi.org/10.1007/s11015-018-0641-y.CrossRef

16.

A. N. Koryshev, I. G. Gnezdilov, A. E. Kuznetsov et al., Patent 2147614 RF, IPC S21V7/16. Method of Preparing a Blast Furnace Tuyere for Operation, No. 98122185/02; submitted 11/30/1998; published 04/20/2000, Bull. No. 11.

17.

A. G. Radyuk et al., Improving the Efficiency of Air Tuyeres of Blast Furnaces: a monograph, Infra-Inzheneriya, Moscow, Vologda (2021).

18.

N. A. Chichenev, S. M. Gorbatyuk, M. G. Naumova, and I. G. Morozova, “Using the similarity theory for description of laser hardening processes,” CIS Iron and Steel Review, 19, 44–47 (2020); https://doi.org/10.17580/cisisr.2020.01.09.CrossRef

19.

S. Gorbatyuk, A. Pashkov, and N. Chichenev, “Improved copper-molybdenum composite material production technology,” Materials Today: Proc, 11, 31–35 (2019); https://doi.org/10.1016/j.matpr.2018.12.102.CrossRef

20.

G. M. Rusev, N. F. Galyuk, V. V. Ovsyannikov et al., Patent 2280697 RF, IPC S21V7/16. Blast-Furnace Tuyere with Protective Coating, No. 2004135517/02; submitted 12/07/2004; published 07/27/2006, Bull. No. 21.

21.

A. G. Manshilin, E. N. Skladanovsky, V. I. Netsvetov et al., Patent 2235789 RF, IPC S21V7/16. Blast-Furnace Tuyere and Method of Applying a Protective Coating to Blast-Furnace Tuyere, No. 2002129285/02; submitted 11/04/2002; published 05/27/2004, Bull. No. 15.

22.

S. M. Gorbatyuk, A. N. Pashkov, I. G. Morozova, and O. N. Chicheneva, “Technologies for applying Ni–Au coatings to heat sinks of SiC-Al metal matrix composite material,” Mater. Today: Proc., 38, 1889–1893 (2021); https://doi.org/10.1016/j.matpr.2020.08.581.CrossRef

23.

V. L. Lukanin and E. V. Udalova, Patent 2453568 RF, IPC C09D5/18. Method of Protecting Surfaces from Abrasive Wear, No. 2011103734/05; submitted 02/02/2011; published 06/20/2012, Bull. No. 17.

24.

M. M. Skripalenko, O. A. Kobelev, and S. D. Sayfullayev, “Burnout assessment of air tuyere in blast furnace,” IOP Conf. Ser.: Mater. Sci. Eng., 971(3), Art. 032033 (2020); https://doi.org/10.1088/1757-899X/971/3/032033.

25.

Yu. S. Tarasov, A. G. Radyuk, and S. M. Gorbatyuk, “Simulation of heat losses and temperature of blast furnaces tuyeres,” MATEC Web of Conf. 2017, 129, article No. 06031; https://doi.org/10.1051/matecconf/201712906031.

26.

Yu. S. Tarasov, A. G. Radyuk, and S. M. Gorbatyuk, “Effect of the thermal insulation of the inner wall on the thermal condition of the air tuyeres of blast furnaces,” Metallurgist, 61(9–10), 745–750 (2018); https://doi.org/10.1007/s11015-018-0558-5.CrossRef

27.

E. N. Vinogradov, A. G. Radyuk, E. A. Volkov, A. L. Terebov, and T. Yu. Sidorova, “Reducing heat losses through blast furnace tuyeres,” Steel Transl., 49 (11), 778–782 (2019); https://doi.org/10.3103/S0967091219110160.CrossRef

28.

V. K. Kondratiev, A. P. Kvartalnov, V. I. Danilov et al., “Investigation of an improved design of a blast-furnace tuyere at the Cherepovets Metallurgical Plant,” Stal’, No. 5, 334–336 (1979).

29.

V. N. Grigoriev, G. I. Urbanovich, E. G. Urbanovich et al., Patent 2215043 RF, IPC S21V7/16. Method of Preparing a Blast Furnace Tuyere for Operation, No. 2001133759/02; submitted 12/11/2001; published 10/27/2002, Bull. No. 30.

30.

Yu. S. Tarasov, O. A. Kobelev, and S. D. Sayfullayev, “Improving the heat insulation efficiency of the blast furnace tuyere,” IOP Conf. Ser.: Mater. Sci. Eng., 971(3) (2020), Art. 032034; https://doi.org/10.1088/1757-899X/971/3/032034.

31.

A. G. Radyuk, A. E. Titlyanov, and T. Yu. Sidorova, “Effect of slurry coating on the resistance of thermal insulation insert in blast furnace air tuyere,” Metallurgist, 63(11–12), 1153–1159 (2020); https://doi.org/10.1007/s11015-020-00935-8.CrossRef

32.

E. A. Volkov, A. G. Radyuk, A. L. Terebov, and A. E. Titlyanov, “Increasing the operational efficiency of insulation liners in the air passage of blast-furnace tuyeres,” Metallurgist, 65(3–4), 363–367 (2021); https://doi.org/10.1007/s11015-021-01165-2.CrossRef

33.

V. I. Kostikov and A. N. Varenkov, Ultra-High Temperature Composite Materials [in Russian], Intermet Engineering, Moscow (2003).

34.

A. Kikuo, Patent 2779514 JP, B22240207 A, IPC⁶ S21V7/16. Blast Furnace Tuyere, submitted 03/13/1989; published Bull. “Izobr. stran mira”, No. 8/99, Issue 47, 5.

35.

Yu. S. Tarasov, A. G. Radyuk, and S. M. Gorbatyuk, “Research of heat stresses in components of blast furnace tuyere,” MATEC Web of Conf, 224, Art. 02029 (2018); https://doi.org/10.1051/matecconf/201822402029.

36.

Yu. S. Zaitsev, Patent 2064505 RF, IPC S1V7/16. Blast-Furnace Tuyere, No. 99 93033428/02; submitted 06/28/93; published 07/27/96, Bull. No. 28.

37.

M. Yu. Sukhanov, M. M. Karimov, E. N. Vinogradov et al., Patent 2523368 RF, IPC S21V7/16. Blast-Furnace Tuyere, No. 2013103327/01; submitted 01/24/2013; published 07/20/2014, Bull. No. 27.

38.

S. M. Gorbatyuk, Yu. S. Tarasov, I. A. Levitskii, A. G. Radyuk, and A. E. Titlyanov, “Influence of a ceramic insert with a swirl on the gas dynamics and heat exchange in the air tuyere of a blast furnace,” Izv. Vyssh. Ucheb. Zav. Chern. Metal, 62(5), 337–344 (2019); https://doi.org/10.17073/0368-0797-2019-5-337-344.CrossRef

39.

A. V. Mokrinsky, V. A. Shatlov, A. B. Yuryev et al., Patent 2280698 RF, IPC S21V7/16. Blast Furnace Air Tuyere, No. 2005104595/02; submitted 02/21/2005; published 07/27/2006, Bull. No. 21.

Titel: Improvement of the Function of Blast-Furnace Air Tuyeres
verfasst von: K. V. Goloshchapov
O. A. Kobelev
A. E. Titlyanov
P. V. Borisov
P. S. Makarov
O. N. Chicheneva
Publikationsdatum: 01.07.2022
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 1-2/2022
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-022-01317-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2022

Enhancement of Charge Loading Operations in the Sintering Machines of Magnitogorsk Iron & Steel Works. Part 2. Formation of the Rational Charge Layer Profile along the Width of the Sintering Machine

Investigation of the Effect of Various Production Lubricants on Aluminum Alloy Strip Rolling Characteristics

Investigation of Mechanical Properties of High-Density Iron-Based Alloys with Nanosized Additions

Technology of Ash and Slag Waste Processing by Сhloridizing Roasting

Method for Controlling the Parameters and Characteristics of an Electric Arc to Evaluate the Efficiency of Using Briquetted Metallized Scale for Steel Smelting

Effect of Production Technological Parameters on Corrosion Resistance of Ultralow-Carbon Cold-Rolled IF-Steels

Premium Partner

Marktübersichten