nach oben

Erschienen in:

2018 | Supplement | Buchkapitel

In Situ and Real-Time Monitoring of Powder-Bed AM by Combining Acoustic Emission and Artificial Intelligence

verfasst von : K. Wasmer, C. Kenel, C. Leinenbach, S. A. Shevchik

Erschienen in: Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

At present, the quality control in additive manufacturing is diligently based on temperature of the process zone or high resolution imaging. Hence, various sensors such as pyrometers, photo diodes and matrix CCD detectors are used. The discrepancies in temperature measurements and the real temperature distribution inside the powder medium reduce the reliability of this method. The high resolution imaging monitors the quality post factum, after a part is manufactured. So far, no methods are known to monitor the quality of additive manufacturing in situ and in real-time. To achieve the goal of accurate real-time quality control, we propose an approach that relies on acoustic emission, which is further analyzed within artificial intelligence framework. We show that the additive manufacturing process has a number of unique acoustic signatures that can be detected, extracted and interpreted in terms of quality.

In this contribution, the processing parameters for the selective laser melting of a 316L steel were modified to create a specimen consisting of sections with three quality levels. During the process, the acoustic emission data were acquired and then processed prior validation. The confidence level achieved in the classification is 79–84% that demonstrates the applicability of this approach for in situ and real-time quality monitoring in additive manufacturing. Finally, the proposed method is very flexible in terms of realization and can be integrated in any additive manufacturing machine.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Development and Optimization of an Innovative Double Chamber Nozzle for Highly Efficient DMD

Nächstes Kapitel Quality Related Effects of the Preheating Temperature on Laser Melted High Carbon Content Steels

Guo, N., Leu, M.: Additive manufacturing: technology, applications and research needs. Front. Mech. Eng. 8(3), 215–243 (2013). doi:10.1007/s11465-013-0248-8 CrossRef

Wohlers Report – 3D Printing and Additive Manufacturing State of the Industry. Annual Worldwide Progress Report. Wohlers Associates, 2013–2016

Gu, D.D., Meiners, W., Wissenbach, K., Poprawe, R.: Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int. Mat. Rev. 57, 133–164 (2012). doi:10.1179/1743280411Y.0000000014 CrossRef

Huang, S.H., Liu, P., Mokasdar, A., Hou, L.: Additive manufacturing and its societal impact: a literature review. Int. J. Adv. Manuf. Tech. 7, 1191–1203 (2013)CrossRef

Zhai, Y.W., Lados, D.A., Lagoy, J.L.: Additive manufacturing: making imagination the major limitation. JOM 66, 808–816 (2014)CrossRef

Khairallah, S.A., Anderson, A.T., Rubenchik, A., King, W.E., Livermore, L.: Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Mat. 108, 36–45 (2016). doi:10.1016/j.actamat.2016.02.014 CrossRef

Gibson, I., Rosen, D.W., Stucker, B.: Additive manufacturing technologies, rapid prototyping to direct digital manufacturing. Springer Science + Business Media (2010). 10.1007/978-1-4419-1120-9

Frazier, W.E.: Metal additive manufacturing: a review. J. Mater. Eng. Perform. 23, 1917–1928 (2014). doi:10.1007/s11665-014-0958-z CrossRef

King, W.E., Anderson, A.T., Ferencz, R.M., Hodge, N.E., Kamath, C., Khairallah, S.A., Rubenchik, A.M.: Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Appl. Phys. Rev. 2, 041304 (2016). doi:10.1063/1.4937809 CrossRef

10.

Tammas-Williams, S., Zhao, H., Léonard, F., Derguti, F., Todd, I., Prangnell, P.B.: XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4 V components manufactured by selective electron beam melting. Mater. Charact. 102(4), 47–61 (2015). doi:10.1016/j.matchar.2015.02.008 CrossRef

11.

Shifeng, W., Shuai, L., Qingsong, W., Yan, C., Sheng, Z., Yusheng, S.: Effect of molten pool boundaries on the mechanical properties of selective laser melting parts. J. Mater. Process. Tech. 214(11), 2660–2667 (2014). doi:10.1016/j.jmatprotec.2014.06.002 CrossRef

12.

Everton, S.K., Hirsch, M., Stravroulakis, P., Leach, R.K., Clare, A.T.: Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Mat. Des. 95, 431–445 (2016). doi:10.1016/j.matdes.2016.01.099

13.

Tapia, G., Elwany, A.: A review on process monitoring and control in metal-based additive manufacturing. J. Manuf. Sci. Eng. 136, 10 (2014). doi:10.1115/1.4028540 CrossRef

14.

Herzog, F., Bechmann, F., Berumen, S., Kruth, J.P., Craeghs, T.: Inventors method for producing a three-dimensional component patent WO1996008749 A3, 2013, 23 August 1995

15.

Vaidya, R., Anand, S.: Image processing assisted tools for pre- and post-processing operations in additive manufacturing. Proc. Manuf. 5, 958–973 (2016). http://dx.doi.org/10.1016/j.promfg.2016.08.084

16.

Alhwarin, F., Ferrein, A., Gebhardt, A., Kallweit, S., Scholl, I., Tedjasukmana, O.: Improving additive manufacturing by image processing and robotic milling. In: IEEE Int. Conf. Autom. Sci. Eng. (CASE) 24–28 August, pp. 924–929 (2015). doi:https://dx.doi.org/10.1109/CoASE.2015.7294217

17.

Furumoto, T., Alkahari, M.R., Ueda, T., Aziz, M.S.A., Hosokawa, A.: Monitoring of laser consolidation process of metal powder with high speed video camera. Phy. Proc. 39, 760–766 (2012). doi:10.1016/j.phpro.2012.10.098 CrossRef

18.

Furumoto, T., Ueda, T., Alkahari, M.R., Hosokawa, A.: Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera. CIRP Ann. Manuf. Technol. 62, 223–226 (2013). doi:10.1016/j.cirp.2013.03.032 CrossRef

19.

Wu, H., Yu, Z., Wang, Y.: A new approach for online monitoring of additive manufacturing based on acoustic emission. In: ASME 2016 11^th International Manufacturing Science and Engineering, Conference Paper No. MSEC2016–8551, V003T08A013, pp. 1–8 (2016) doi:10.1115/MSEC2016-8551

20.

Kashyap, R.: Fiber Bragg Gratting, 2nd edn. Elsevier, Amsterdam (2010). ISBN 978-0-12-372579-0

21.

Ramakrishnan, M., Rajan, G., Semenova, Y., Farrell, G.: Overview of fiber optic sensor technologies for strain/temperature sensing applications in composite materials. Sensors 16(1), 99 (2016). doi:10.3390/s16010099 CrossRef

22.

Grosse, C.U., Ohtsu, M.: Acoustic emission testing. Springer-Verlag, Berlin, Heidelberg. doi:10.1007/978-3-540-69972-9

23.

Sharratt, B.M.: Non-destructive techniques and technologies for qualification of additive manufactured parts and processes: a literature review, Contract Report DRDC-RDDC-2015-C035 (2015). http://cradpdf.drdc-rddc.gc.ca/PDFS/unc200/p801800_A1b.pdf

24.

Cerniglia, D., Scafidi, M., Pantano, A., Łopatka, R.: Laser ultrasonic technique for laser powder deposition inspection. In: 13^th International Symposium on Non-dest. Charact. Mat., Le Mans, May 2013.http://www.ndt.net/article/ndcm2013/content/papers/13_Cerniglia.pdf

25.

Purtonen, T., Kalliosaari, A., Salminen, A.: Monitoring and adaptive control of laser processes. Phys. Proc. 56, 1218–1231 (2014). doi:10.1016/j.phpro.2014.08.038 CrossRef

26.

Strantza, M., Aggelis, D.G., de Baere, D., Guillaume, P., van Hemelrijck, D.: Evaluation of SHM system produced by additive manufacturing via acoustic emission and other NDT methods. Sensors 15, 26709–26725 (2015). doi:10.3390/s151026709 CrossRef

27.

Shevchik, S.A., Kenel, C., Leinenbach, C., Wasmer, K.: Acoustic emission quality monitoring in additive manufacturing using spectral convolutional neural networks. Submitted in Add. Manf. (s2017)

28.

Schmidhuber, J.: Deep learning in neural networks: an overview. J. Neural. Netw. 61, 85–117 (2015). doi:10.1016/j.neunet.2014.09.003 CrossRef

29.

Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J.V., Kruth, J.P.: A study of the microstructural evolution during selective laser melting of Ti–6Al–4 V. Acta Meter. 58(9), 3303–3312 (2010). doi:10.1016/j.actamat.2010.02.004 CrossRef

30.

Daubechies, I.: Ten lectures on wavelets. In: CBMS-NSF Regional Conference Series in Applied Mathematics (1992) 10.1137/1.9781611970104

31.

Lin, T., Xu, S., Shi, Q., Hao, P.: An algebraic construction of orthonormal M-band wavelets with perfect reconstruction. Appl. Math. Comput. 172(2), 717–730 (2006). doi:10.1016/j.amc.2004.11.025 MathSciNetMATH

32.

Thomas, S., Ganapathy, S., Saon, G., Soltau, H.: Analyzing convolutional neural networks for speech activity detection in mismatched acoustic conditions, Acoustics, Speech and Signal Processing (ICASSP). In: IEEE International Conference on Acoustics Speech and Signal Processing (ICASSP) (2014). 10.1109/ICASSP.2014.6854054

33.

Krizhevsky, A., Sutskever, I., Hinton, G.E.: ImageNet classification with deep convolutional neural networks. Adv. Neur. Inf. Proc. Sys. 25 (NIPS 2012) (2012). https://papers.nips.cc/paper/4824-imagenet-classification-with-deep-convolutional-neural-networks

34.

Crocker, M.J. (ed.): Handbook of Noise and Vibration Control. Wiley, New Jersey (2007). doi:10.1121/1.2973236. ISBN 978-0-471-39599-7MATH

Titel: In Situ and Real-Time Monitoring of Powder-Bed AM by Combining Acoustic Emission and Artificial Intelligence
verfasst von: K. Wasmer
C. Kenel
C. Leinenbach
S. A. Shevchik
Verlag: Springer International Publishing
Buch: Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017
Print ISBN: 978-3-319-66865-9

Electronic ISBN: 978-3-319-66866-6

Copyright-Jahr: 2018
DOI: https://doi.org/10.1007/978-3-319-66866-6_20

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht