Skip to main content
Erschienen in: Tribology Letters 1/2015

01.01.2015 | Original Paper

In Situ X-Ray Diffraction Study of Phase Transformation of Steel in Scuffing Process

verfasst von: Seiji Kajita, Kazuyuki Yagi, Takashi Izumi, Jun Koyamachi, Mamoru Tohyama, Koji Saito, Joichi Sugimura

Erschienen in: Tribology Letters | Ausgabe 1/2015

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

We developed a novel in situ observation method associated with synchrotron radiation X-ray diffraction (XRD) that enables us to simultaneously monitor structural changes of materials, images at frictional interfaces, friction force and temperature with a time resolution on the order of tens of milliseconds. The in situ method was applied to study scuffing process of martensitic steel under a dry condition. The result shows that during scuffing, martensite to austenite phase transformation occurred with plastic flow. The generated austenite phase disappeared when the shear test was stopped. The austenite was present at a surface temperature lower than the nominal austenitisation temperature. After intermittent occurrences of the austenitisation with local plastic flow, the scuffing feature showed a larger amount of austenite, higher friction and greater plastic flow. The XRD spectra suggest that some metallurgical properties of the near-surface material of the steel may change at the scuffing-mode transition.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
2.
3.
Zurück zum Zitat Johnson, R.R., Dow, T.A., Zhang, Y.Y.: Thermoelastic instability in elliptic contact between two sliding surfaces. Trans. ASME J. Tribol. 110, 80–86 (1988)CrossRef Johnson, R.R., Dow, T.A., Zhang, Y.Y.: Thermoelastic instability in elliptic contact between two sliding surfaces. Trans. ASME J. Tribol. 110, 80–86 (1988)CrossRef
4.
Zurück zum Zitat Ludema, K.C.: A review of scuffing and running-in of lubricated surface with asperities and oxides in perspective. Wear 100, 315–331 (1984)CrossRef Ludema, K.C.: A review of scuffing and running-in of lubricated surface with asperities and oxides in perspective. Wear 100, 315–331 (1984)CrossRef
5.
Zurück zum Zitat Markov, D., Kelly, D.: Mechanisms of adhesion-initiated catastrophic wear: pure sliding. Wear 239, 189–210 (2000)CrossRef Markov, D., Kelly, D.: Mechanisms of adhesion-initiated catastrophic wear: pure sliding. Wear 239, 189–210 (2000)CrossRef
6.
Zurück zum Zitat Sheiretov, T., Yoon, H., Cusano, C.: Scuffing under dry sliding conditions—part I: experimental studies. Tribol. Trans. 41, 435–446 (1998)CrossRef Sheiretov, T., Yoon, H., Cusano, C.: Scuffing under dry sliding conditions—part I: experimental studies. Tribol. Trans. 41, 435–446 (1998)CrossRef
7.
Zurück zum Zitat Sheiretov, T., Yoon, H., Cusano, C.: Scuffing under dry sliding conditions—part II: theoretical studies. Tribol. Trans. 41, 447–458 (1998)CrossRef Sheiretov, T., Yoon, H., Cusano, C.: Scuffing under dry sliding conditions—part II: theoretical studies. Tribol. Trans. 41, 447–458 (1998)CrossRef
8.
Zurück zum Zitat Hershberger, J., Ajayi, O.O., Zhang, J., Yoon, H., Fenske, G.R.: Formation of austenite during scuffing failure of SAE 4340 steel. Wear 256, 159–167 (2004)CrossRef Hershberger, J., Ajayi, O.O., Zhang, J., Yoon, H., Fenske, G.R.: Formation of austenite during scuffing failure of SAE 4340 steel. Wear 256, 159–167 (2004)CrossRef
9.
Zurück zum Zitat Hershberger, J., Ajayi, O.O., Zhang, J., Yoon, H., Fenske, G.R.: Evidence of scuffing initiation by adiabatic shear instability. Wear 258, 1471–1478 (2005)CrossRef Hershberger, J., Ajayi, O.O., Zhang, J., Yoon, H., Fenske, G.R.: Evidence of scuffing initiation by adiabatic shear instability. Wear 258, 1471–1478 (2005)CrossRef
10.
Zurück zum Zitat Ajayi, O.O., Hersberger, J.G., Zhang, J., Yoon, H., Fenske, G.R.: Microstructural evolution during scuffing of hardened 4340 steel—implication for scuffing mechanism. Tribol. Int. 38, 277–282 (2005)CrossRef Ajayi, O.O., Hersberger, J.G., Zhang, J., Yoon, H., Fenske, G.R.: Microstructural evolution during scuffing of hardened 4340 steel—implication for scuffing mechanism. Tribol. Int. 38, 277–282 (2005)CrossRef
11.
Zurück zum Zitat Ajayi, O.O., Martin, C.L., Erck, R.A., Fenske, G.R.: Scuffing mechanism of near-surface material during lubricated severe sliding contact. Wear 271, 1750–1753 (2011)CrossRef Ajayi, O.O., Martin, C.L., Erck, R.A., Fenske, G.R.: Scuffing mechanism of near-surface material during lubricated severe sliding contact. Wear 271, 1750–1753 (2011)CrossRef
12.
Zurück zum Zitat Ajayi, O.O., Martin, C.L., Erck, R.A., Fenske, G.R.: Analytical predictive modeling of scuffing initiation in metallic materials in sliding contact. Wear 301, 57–61 (2013)CrossRef Ajayi, O.O., Martin, C.L., Erck, R.A., Fenske, G.R.: Analytical predictive modeling of scuffing initiation in metallic materials in sliding contact. Wear 301, 57–61 (2013)CrossRef
13.
Zurück zum Zitat Enthoven, J., Spikes, H.A.: Infrared and visual study of the mechanisms of scuffing. Tribol. Trans. 39, 441–447 (1996)CrossRef Enthoven, J., Spikes, H.A.: Infrared and visual study of the mechanisms of scuffing. Tribol. Trans. 39, 441–447 (1996)CrossRef
14.
Zurück zum Zitat Yagi, K., Ebisu, Y., Sugimura, J., Kajita, S., Ohmori, T., Suzuki, A.: In situ observation of wear process before and during scuffing in sliding contact. Tribol. Lett. 43, 361–368 (2011)CrossRef Yagi, K., Ebisu, Y., Sugimura, J., Kajita, S., Ohmori, T., Suzuki, A.: In situ observation of wear process before and during scuffing in sliding contact. Tribol. Lett. 43, 361–368 (2011)CrossRef
15.
Zurück zum Zitat Li, H., Yagi, K., Sugimura, J., Kajita, S., Shinyoshi, T.: Role of wear particles in scuffing initiation. Tribol. Online 8, 285–294 (2013)CrossRef Li, H., Yagi, K., Sugimura, J., Kajita, S., Shinyoshi, T.: Role of wear particles in scuffing initiation. Tribol. Online 8, 285–294 (2013)CrossRef
16.
Zurück zum Zitat Chandrasekaran, M., Batchelor, A.W., Loh, N.L.: Direct observation of frictional seizure of mild steel sliding on aluminum by X-ray imaging Part I Methods. J. Mater. Sci. 35, 1589–1596 (2000)CrossRef Chandrasekaran, M., Batchelor, A.W., Loh, N.L.: Direct observation of frictional seizure of mild steel sliding on aluminum by X-ray imaging Part I Methods. J. Mater. Sci. 35, 1589–1596 (2000)CrossRef
17.
Zurück zum Zitat Chandrasekaran, M., Batchelor, A.W., Loh, N.L.: Direct observation of frictional seizure of mild steel sliding on aluminum by X-ray imaging Part II Mechanism. J. Mater. Sci. 35, 1597–1602 (2000)CrossRef Chandrasekaran, M., Batchelor, A.W., Loh, N.L.: Direct observation of frictional seizure of mild steel sliding on aluminum by X-ray imaging Part II Mechanism. J. Mater. Sci. 35, 1597–1602 (2000)CrossRef
18.
Zurück zum Zitat Chandrasekaran, M., Batchelor, A.W., Loh, N.L.: Frictional seizure of aluminium observed by X-ray imaging. Tribol. Int. 35, 297–308 (2002)CrossRef Chandrasekaran, M., Batchelor, A.W., Loh, N.L.: Frictional seizure of aluminium observed by X-ray imaging. Tribol. Int. 35, 297–308 (2002)CrossRef
19.
Zurück zum Zitat Jacobs, T.D.B., Carpick, R.W.: Nanoscale wear as a stress-assisted chemical reaction. Nat. Nanotechnol. 27, 108–112 (2013)CrossRef Jacobs, T.D.B., Carpick, R.W.: Nanoscale wear as a stress-assisted chemical reaction. Nat. Nanotechnol. 27, 108–112 (2013)CrossRef
20.
Zurück zum Zitat Michler, J., Rabe, R., Bucaille, J.L., Moser, B., Schwaller, P., Breguet, J.M.: Investigation of wear mechanisms through in situ observation during microscratching inside the scanning electron microscope. Wear 259, 18–26 (2005)CrossRef Michler, J., Rabe, R., Bucaille, J.L., Moser, B., Schwaller, P., Breguet, J.M.: Investigation of wear mechanisms through in situ observation during microscratching inside the scanning electron microscope. Wear 259, 18–26 (2005)CrossRef
21.
Zurück zum Zitat Ribeiro, R., Shan, Z., Minor, A.M., Liang, H.: In situ observation of nano-abrasive wear. Wear 263, 1556–1559 (2007)CrossRef Ribeiro, R., Shan, Z., Minor, A.M., Liang, H.: In situ observation of nano-abrasive wear. Wear 263, 1556–1559 (2007)CrossRef
22.
Zurück zum Zitat Ishida, T., Sato, T., Fujita, H.: In-situ observation of shear deformation of gold single real contact point at the nanoscale. Tribol. Online 7, 127–131 (2012)CrossRef Ishida, T., Sato, T., Fujita, H.: In-situ observation of shear deformation of gold single real contact point at the nanoscale. Tribol. Online 7, 127–131 (2012)CrossRef
23.
Zurück zum Zitat Hase, A., Mishina, H., Wada, M.: Acoustic emission in elementary processes of friction and wear: in-situ observation of friction surface and AE signals. J. Adv. Mech. Des. Syst. Manuf. 3, 333–344 (2009) Hase, A., Mishina, H., Wada, M.: Acoustic emission in elementary processes of friction and wear: in-situ observation of friction surface and AE signals. J. Adv. Mech. Des. Syst. Manuf. 3, 333–344 (2009)
24.
Zurück zum Zitat Cullity, B.D.: Elements of X-Ray Diffraction. Addison-Wesley, Reading, MA (1956) Cullity, B.D.: Elements of X-Ray Diffraction. Addison-Wesley, Reading, MA (1956)
25.
Zurück zum Zitat Japan Institute of Metals and Materials: Metal Data Book. Maruzen, Tokyo (in Japanese) (1974) Japan Institute of Metals and Materials: Metal Data Book. Maruzen, Tokyo (in Japanese) (1974)
26.
Zurück zum Zitat Davis, J.R.: Metals Handbook: Desk, 2nd edn. ASM International, Ohio (1998) Davis, J.R.: Metals Handbook: Desk, 2nd edn. ASM International, Ohio (1998)
27.
Zurück zum Zitat Lee, Y.K., Shin, H.C., Leem, D.S., Choi, J.Y., Jin, W., Choi, C.S.: Reverse transformation mechanism of martensite to austenite and amount of retained austenite after reverse transformation in Fe-3Si-13Cr-7Ni (wt-%) martensitic stainless steel. Mater. Sci. Technol. 19, 393–398 (2003)CrossRef Lee, Y.K., Shin, H.C., Leem, D.S., Choi, J.Y., Jin, W., Choi, C.S.: Reverse transformation mechanism of martensite to austenite and amount of retained austenite after reverse transformation in Fe-3Si-13Cr-7Ni (wt-%) martensitic stainless steel. Mater. Sci. Technol. 19, 393–398 (2003)CrossRef
28.
Zurück zum Zitat Danon, A., Servant, C., Alamo, A., Brachet, J.C.: Heterogeneous austenite grain growth in 9Cr martensitic steels: influence of the heating rate and the austenitization temperature. Mater. Sci. Eng. A 348, 122–132 (2003)CrossRef Danon, A., Servant, C., Alamo, A., Brachet, J.C.: Heterogeneous austenite grain growth in 9Cr martensitic steels: influence of the heating rate and the austenitization temperature. Mater. Sci. Eng. A 348, 122–132 (2003)CrossRef
29.
Zurück zum Zitat Akimoto, S., Suzuki, T., Yagi, T., Shimomura, O.: Phase diagram of iron determined by high-pressure/temperature X-ray diffraction using synchrotron radiation. High Press. Res. Miner. Phys: A Volume in Honor of Syun-iti Akimoto, 149–154 (2013). doi:10.1029/GM039p0149/summary Akimoto, S., Suzuki, T., Yagi, T., Shimomura, O.: Phase diagram of iron determined by high-pressure/temperature X-ray diffraction using synchrotron radiation. High Press. Res. Miner. Phys: A Volume in Honor of Syun-iti Akimoto, 149–154 (2013). doi:10.​1029/​GM039p0149/​summary
30.
Zurück zum Zitat Bhadeshia, H.K.D.H.: Steels for bearings. Prog. Mater. Sci. 57, 268–435 (2012)CrossRef Bhadeshia, H.K.D.H.: Steels for bearings. Prog. Mater. Sci. 57, 268–435 (2012)CrossRef
31.
Zurück zum Zitat Kundrák, J., Gácsi, A., Gyáni, K., Bana, V., Tomolya, G.: X-ray diffraction investigation of white layer development in hard-turning surfaces. Int. J. Adv. Manuf. Technol. 62, 457–469 (2012)CrossRef Kundrák, J., Gácsi, A., Gyáni, K., Bana, V., Tomolya, G.: X-ray diffraction investigation of white layer development in hard-turning surfaces. Int. J. Adv. Manuf. Technol. 62, 457–469 (2012)CrossRef
32.
Zurück zum Zitat Ramesh, A., Melkote, S.N., Allard, L.F., Riester, L., Watkins, T.R.: Analysis of white layers formed in hard turning of AISI 52100 steel. Mater. Sci. Eng. A 390, 88–97 (2005)CrossRef Ramesh, A., Melkote, S.N., Allard, L.F., Riester, L., Watkins, T.R.: Analysis of white layers formed in hard turning of AISI 52100 steel. Mater. Sci. Eng. A 390, 88–97 (2005)CrossRef
33.
Zurück zum Zitat Hosseini, S.B., Beno, T., Klement, U., Kaminski, J., Ryttberg, K.: Cutting temperatures during hard turning—measurements and effects on white layer formation in AISI 52100. J. Mater. Process. Technol. 214, 1293–1300 (2014)CrossRef Hosseini, S.B., Beno, T., Klement, U., Kaminski, J., Ryttberg, K.: Cutting temperatures during hard turning—measurements and effects on white layer formation in AISI 52100. J. Mater. Process. Technol. 214, 1293–1300 (2014)CrossRef
34.
Zurück zum Zitat Duffy, J., Chi, Y.C.: On the measurement of local strain and temperature during the formation of adiabatic shear band. Mater. Sci. Eng. A 157, 195–210 (1992)CrossRef Duffy, J., Chi, Y.C.: On the measurement of local strain and temperature during the formation of adiabatic shear band. Mater. Sci. Eng. A 157, 195–210 (1992)CrossRef
35.
Zurück zum Zitat Cho, K.M., Lee, S., Nutt, S.R., Duffy, J.: Adiabatic shear band formation during dynamic torsional deformation of an HY-100 steel. Acta. Metall. Mater. 41, 923–932 (1993)CrossRef Cho, K.M., Lee, S., Nutt, S.R., Duffy, J.: Adiabatic shear band formation during dynamic torsional deformation of an HY-100 steel. Acta. Metall. Mater. 41, 923–932 (1993)CrossRef
36.
Zurück zum Zitat Duan, C., Kong, W., Hao, Q., Zhou, F.: Modeling of white layer thickness in high speed machining of hardened steel based on phase transformation mechanism. Int. J. Adv. Manuf. Technol. 69, 59–70 (2013)CrossRef Duan, C., Kong, W., Hao, Q., Zhou, F.: Modeling of white layer thickness in high speed machining of hardened steel based on phase transformation mechanism. Int. J. Adv. Manuf. Technol. 69, 59–70 (2013)CrossRef
37.
Zurück zum Zitat Han, S., Melkote, S.N., Haluska, M.S., Watkins, T.R.: White layer formation due to phase transformation in orthogonal machining of AISI 1045 annealed steel. Mater. Sci. Eng. A 488, 195–204 (2008)CrossRef Han, S., Melkote, S.N., Haluska, M.S., Watkins, T.R.: White layer formation due to phase transformation in orthogonal machining of AISI 1045 annealed steel. Mater. Sci. Eng. A 488, 195–204 (2008)CrossRef
38.
Zurück zum Zitat Popov, V.L.: Contact Mechanics and Friction Physical Principles and Application. Springer, Heidelberg (2010) Popov, V.L.: Contact Mechanics and Friction Physical Principles and Application. Springer, Heidelberg (2010)
Metadaten
Titel
In Situ X-Ray Diffraction Study of Phase Transformation of Steel in Scuffing Process
verfasst von
Seiji Kajita
Kazuyuki Yagi
Takashi Izumi
Jun Koyamachi
Mamoru Tohyama
Koji Saito
Joichi Sugimura
Publikationsdatum
01.01.2015
Verlag
Springer US
Erschienen in
Tribology Letters / Ausgabe 1/2015
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-014-0443-8

Weitere Artikel der Ausgabe 1/2015

Tribology Letters 1/2015 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.