nach oben

Cellulose

Erschienen in:

07.11.2015 | Original Paper

Influence of adhesive layer on the stability of kozo paper

verfasst von: Marijana Mimica Tkalčec, Lahorija Bistričić, Mirela Leskovac

Erschienen in: Cellulose | Ausgabe 1/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Two types of Japanese papers containing 100 % (JP1) and 50 % (JP2) kozo fibers were treated with different adhesives: methyl-cellulose, rice starch, hydroxypropyl-cellulose and acrylic copolymer. The Fourier transform infrared spectroscopic (FTIR) analysis confirmed the formation of adhesive layer on the surface of papers. The influence of accelerated ageing procedures of moist heat ageing and UV radiation on sample surfaces was established using FTIR and contact angle measurements. The degradation level of papers was studied measuring the intrinsic viscosity and determining the degree of polymerization. Mechanical properties were determined by tensile tests. The results showed that the polar and dispersive components of the surface energy depend strongly on the surface treatments as well as on conditions of ageing. Analysis of degree of polymerization and tensile strength revealed that treatment with methyl-cellulose, rice starch and hydroxypropyl-cellulose reduced degradation of Japanese papers.

Vorheriger Artikel Suitability of wheat straw semichemical pulp for the fabrication of lignocellulosic nanofibres and their application to papermaking slurries

Nächster Artikel High strain rate radial compression of Norway spruce earlywood and latewood

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abdel-Azim A, Atta AM, Farahat MS, Boutros WY (1998) Determination of intrinsic viscosity of polymeric compounds through a single specific viscosity measurement. Polymer 39:6827–6833CrossRef

Ali M, Emsley AM, Herman H, Heywood RJ (2001) Spectroscopic studies of the ageing of cellulosic paper. Polymer 42:2893–2900CrossRef

Ayadi F, Bayer IS, Fragouli D, Liakos I, Cingolani R, Athanassiou A (2013) Mechanical reinforcement and water repellency induced to cellulose sheets by a polymer treatment. Cellulose 20:1501–1509CrossRef

Barsberg S (2010) Prediction of vibrational spectra of polysaccharides—simulated IR spectrum of cellulose based on density functional theory (DFT). J Phys Chem B 114:11703–11708CrossRef

Battista OA (1989) Cellulose structure and properties. In: Mark HF, Bikales NM, Overberg CG, Menges G (eds) Encyclopedia of polymer science and engineering, 2nd edn. Wiley, New York, pp 90–115

Caufild DF, Gunderson DE (1988) Paper testing and strength characteristic. In: TAPPI proceedings of the 1988 paper preservation symposium, Washington, October 19–21

Colom X, Carrillo F, Nouges F, Garriga P (2003) Structural analysis of photodegraded wood by means of FTIR spectroscopy. Polym Degrad Stab 80:543–549CrossRef

Heikkila A, Karha P, Tanskanen A, Kaunismaa M, Koskela T, Kaurola Ture JT, Syrjala S (2009) Characterizing a UV chamber with mercury lamps for assessment of comparability to natural UV conditions. Polym Test 28:57–65CrossRef

ISO 5351 (2010) Pulps-determination of limiting viscosity number in cupriethylendiamine (CED) solution

Kamel S, El-Sakhawy M, Nada AM (2004) Mechanical properties of the paper sheets treated with different polymers. Thermochim Acta 421:81–85CrossRef

Karlovits M, Gregor-Svetec D (2012) Durability of cellulose and synthetic papers exposed to various methods of accelerated ageing. Acta Polytech Hung 9(6):81–100

Kavkler K, Demšar D (2012) Application of FTIR and Raman spectroscopy to qualitative analysis of structural changes in cellulosic fibres. Tekstilec 55:19–31

Kim JS, Friend RH, Caciall F (1999) Surface energy and polarity of treated indium–tin–oxide anodes for polymer light-emitting diodes studied by contact-angle measurements. J Appl Phys 86:2774–2778CrossRef

Koenig JL, D’esposito L, Antoon MK (1977) The ratio method for analyzing infrared spectra of mixtures. Appl Spectrosc 31:292–295CrossRef

Kondo T, Togawa E, Brown RM (2001) “Nematic ordered cellulose”: a concept of glucan chain association. Biomacromolecules 2:1324–1330. ISSN 1525-7797

Lattuati-Derieux A, Bonnassies-Termes S, Lavedrine B (2006) Characterisation of compounds emitted during natural and artificial ageing of a book. Use of headspace-solid-phase microextraction/gas chromatography/mass spectrometry. J Cult Herit 7:123–133CrossRef

Lojewska J, Miskowiec P, Lojewski T, Proniewicz LM (2005) Cellulose oxidative and hydrolytic degradation: in situ FTIR approach. Polym Degrad Stab 88:512–520CrossRef

Lojewski T, Zieba K, Lojewska J (2010) Size exclusion chromatography and viscometry in paper degradation studies. New Mark–Houwink coefficients for cellulose in cupri-ethylenediamine. J Chromatogr A 1217:6462–6468CrossRef

Luner PE, Oh E (2001) Characterization of the surface free energy of cellulose ether films. Colloids Surf A 181:31–48CrossRef

Malešič J, Kolar J, Strlič M, Kočar D, Fromafeot D, Lemaire J, Haillant O (2005) Photo-induced degradation of cellulose. Polym Degrad Stab 89:64–69CrossRef

Manso M, Carvalho ML (2009) Application of spectroscopic techniques for the study of paper documents: a survey. Spectrochim Acta B 64:482–490CrossRef

Manso M, Pessanha S, Carvalho ML (2006) Artificial ageing processes in modern papers: X-ray spectrometry studies. Spectrochim Acta B 61:922–928CrossRef

Marechal Y, Chanzy H (2000) The hydrogen bond network in I_β cellulose as observed by infrared spectrometry. J Mol Struct 523:183–196CrossRef

Margutti S, Conio G, Calvini P, Pedemonte E (2001) Hydrolytic and oxidative degradation of paper. Restaurator 22:67–83

Nelson ML, O’Connor RT (1964) Relation of certain infrared bands to cellulose crystallinity and crystal latticed type. Part I. Spectra of lattice types I, II, III and of amorphous cellulose. J Appl Polym Sci 8:1311–1324CrossRef

Nishiyama Y, Johnson GP, French AD, Forsyth VT, Langan P (2008) Neutron crystallography, molecular dynamics, and quantum mechanics studies of the nature of hydrogen bonding in cellulose I_β. Biomacromolecules 9:3133–3140CrossRef

Nissan AH (1977) The elastic modulus of lignin as related to moisture content. Wood Sci Technol 11:147–151

Piantanida G, Bicchieri M, Coluzza C (2005) Atomic force microscopy characterization of the ageing of pure cellulose paper. Polymer 46:12313–12321CrossRef

Porck HJ (2000) Rate of paper degradation, the predictive value of artificial ageing tests. European Commission on Preservation and Access, Amsterdam

Proniewicz LM, Paluszkiewicz C, Weselucha-Birczynska A, Majcherczyk H, Baranski A, Konieczna A (2001) FT-IR and FT-Raman study of hydrothermally degradated cellulose. J Mol Struct 596:163–169CrossRef

Proniewicz LM, Paluszkiewicz C, Weselucha-Birczynska A, Baranski A, Dutka D (2002) FT-IR and FT-Raman study of hydrothermally degraded groundwood containing paper. J Mol Struct 614:345–353CrossRef

Shen W, Filonanko Y, Truong Y, Parker IH, Brack N, Pigram P, Liesegang J (2000) Contact angle measurement and surface energetics of sized and unsized paper. Colloids Surf A 173:117–126CrossRef

Sugiyama J, Vuong R, Chanzy H (1991) Combined infrared and electron diffraction study of the polymorphism of native celluloses. Macromolecules 24:2461–2466CrossRef

Tang J, Chen K, Xu J, Zhao C (2001) Effects of dilute acid hydrolysis on composition and structure of cellulose in Eulaliopsis binate. BioResources 6:1069–1078

Wu S (1982) Polymer interface and adhesion. Marcel Dekker, New York, pp 178–181

Wu X, Moon RJ, Martini A (2013) Crystalline cellulose elastic modulus predicted by atomistic models of uniform deformation and nanoscale indentation. Cellulose 20:43–55CrossRef

Zervos S (2007) Accelerated ageing kinetics of pure cellulose paper after washing, alkalization and impregnation with methylcellulose. Restaurator 28:55–69

Zervos S (2010) Natural and accelerated ageing of cellulose and paper. In: Lejeune A, Deprez T (eds) Cellulose: structure and properties, derivatives and industrial uses. Nova Science Publ, New York, pp 155–203

Zhbankov RG, Firsov SP, Buslov KD, Nikonenko AN, Marchewka MK, Ratajczak H (2002) Structural physic-chemistry of cellulose macromolecules. Vibrational spectra and structure of cellulose. J Mol Struct 614:117–125CrossRef

Titel: Influence of adhesive layer on the stability of kozo paper
verfasst von: Marijana Mimica Tkalčec
Lahorija Bistričić
Mirela Leskovac
Publikationsdatum: 07.11.2015
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 1/2016
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-015-0816-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 1/2016

Modification of nanocrystalline cellulose for application as a reinforcing nanofiller in PMMA composites

Characterization of cellulose degradation during accelerated ageing by SEC-MALS, SEC-DAD, and A4F-MALS methods

Degradation of viscose fibers during acidic treatment

Bio polyetherurethane composites with high content of natural ingredients: hydroxylated soybean oil based polyol, bio glycol and microcrystalline cellulose

Phosphoric acid-based preparing of chitin nanofibers and nanospheres

Characterization of bilayer bacterial cellulose membranes with different fiber densities: a promising system for controlled release of the antibiotic ceftriaxone