nach oben

Journal of Materials Engineering and Performance

Erschienen in:

12.12.2016

Influence of Annealing Time and Thermo-Mechanical Cycling on Constrained Recovery Properties of a Cold-Worked NiTi Wire

verfasst von: Xiaojun Yan, Yuli Ge, Jan Van Humbeeck

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work, the influence of parameters such as annealing time, pre-strain and thermo-mechanical cycling on recovery stresses of NiTi wires has been investigated by using a dynamic mechanical analyzer. The results show that the maximum recovery stress decreases with increasing annealing time and increases with increasing pre-strain except for 60-min annealed sample with 4% pre-strain, which has a higher recovery stress than 45-min annealed sample with the same pre-strain. The recovery stresses drastically increase during the first two thermo-mechanical cycles for all samples, regardless of annealing time. The observed changes of recovery stress could be attributed to different transformation temperatures and mechanical properties induced by different annealing times and/or thermo-mechanical cycling.

Vorheriger Artikel Pitting Behavior of L415 Pipeline Steel in Simulated Leaching Liquid Environment

Nächster Artikel Wear and Corrosion Behavior of Functionally Graded Nano-SiC/2014Al Composites Produced by Powder Metallurgy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

J. Van Humbeeck, Non-Medical Application of Shape Memory Alloys, Mater. Sci. Eng. A, 1999, 273–275, p 134–148CrossRef

K. Otsuka and X. Ren, Recent Developments in the Research of Shape Memory Alloys, Intermetallics, 1999, 7, p 511–528CrossRef

D.A. Miller and D.C. Lagoudas, Influence of Cold Work and Heat Treatment on the Shape Memory Effect and Plastic Strain Development of NiTi, Mater. Sci. Eng. A, 2001, 308, p 161–175CrossRef

IYu Khmelevskaya, Effect of Initial Strengthening on Recovery Stress Generation and Isothermal Relaxation Processes in TiNi Alloys, J. Phys. IV Fr., 2001, 11, p 41–46CrossRef

W. Cai, C.S. Zhang, and L.C. Zhao, Recovery Stress of Ni-Ti-Nb Wide-Hysteresis Shape Memory Alloy Under Constant Strain and Thermomechanical Cycling, J. Mater. Sci. Lett., 1994, 13, p 8–9CrossRef

Y.J. Zheng, L.S. Cui, and J. Schrooten, Thermal Cycling Behavior of a NiTiCu Wire Reinforced Kevlar/Epoxy Composite, Mater. Lett., 2005, 59, p 3287–3290CrossRef

X.J. Yan and J. Van Humbeeck, Influence of Annealing on Recovery Stress of Cold-Worked NiTi Wire, Funct. Mater. Lett., 2009, 2, p 1–6CrossRef

H. Sadiq, M.B. Wong, R. Al-Mahaidi, and X.L. Zhao, The Effects of Heat Treatment on the Recovery Stresses of Shape Memory Alloys, Smart Mater. Struct., 2010, 19, p 1–7CrossRef

P. Šittner, D. Vokoun, G.N. Dayananda, and R. Stalmans, Recovery Stress Generation in Shape Memory Ti50Ni45Cu5 thin Wires, Mater. Sci. Eng. A, 2000, 286, p 298–311CrossRef

10.

D. Vokoun, V. Kafka, and C.T. Hu, Recovery Stresses Generated by NiTi Shape Memory Wires Under Different Constraint Conditions, Smart Mater. Struct., 2003, 12, p 680–685CrossRef

11.

W. Cai, C.S. Zhang, and L.C. Zhao, Recovery Stress in a Ni-Ti-Nb Shape Memory Alloy with Wide Transformation Hysteresis, J. Mater. Sci. Technol, 1994, 10, p 27–30CrossRef

12.

P. Sittner, P. Lukas, V. Novak, D. Neov, and M. Ceretti, In Situ Neutron Diffraction Study of Stresses Generated by Shape Memory Alloys, J. Neutron Res., 2001, 9, p 143–150CrossRef

13.

K.A. Tsoi, J. Schrooten, and R. Stalmans, Part I. Thermomechanical Characteristics of Shape Memory Alloys, Mater. Sci. Eng. A, 2004, 368, p 286–298CrossRef

14.

K.A. Tsoi, J. Schrooten, and R. Stalmans, Part II. Thermomechanical Characteristics of Shape Memory Alloys, Mater. Sci. Eng. A, 2004, 368, p 299–310CrossRef

15.

J. Schrooten, K.A. Tsoi, R. Stalmans, Y.J. Zheng, P. Sittner, Comparison Between Generation of Recovery Stresses in Shape Memory Wires and Composites: Theory and Reality, in Proceedings of the SPIE-4234, 2001, p 114–124

16.

D. Vokoun, R. Stalmans, Recovery Stresses Generated by NiTi Shape Memory Wires, in Proceedings of the SPIE-3667, 1999, p 825–835

17.

Eva L. Kirkby, Joseph D. Rule, Veronique J. Michaud, Nancy R. Sottos, Scott R. White, and Jan-Anders E. Manson, Embedded Shape-Memory Alloy Wires for Improved Performance of Self-Healing Polymers, Adv. Funct. Mater., 2008, 18, p 2253–2260CrossRef

18.

V. Brailovski, E. Clément, P. Terriault, and F. Trochu, Influence of Stress Concentration on the Recovery Stress Generation, J. Phys. IV Fr., 2003, 112, p 231–234CrossRef

19.

H.C. Lin, T.P. Wang, K.M. Lin, C.Y. Chung, P.C. Wang, and W.H. Ho, The Stress Relaxation of a Fe59Mn30Si6Cr5 Shape Memory Alloy, J. Alloys Compd., 2008, 466, p 119–125CrossRef

20.

P. Papps, D. Bollas, J. Parthenios, V. Dracopoulos, and C. Galiotis, Transformation Fatigue and Stress Relaxation of Shape Memory Alloy Wires, Smart Mater. Stuct., 2007, 16, p 2560–2570CrossRef

21.

Y.Q. Fu and H.J. Du, Relaxation and Recovery of Stress During Martensite Transformation for Sputtered Shape Memory TiNi Film, Surf. Coat. Technol., 2002, 153, p 100–105CrossRef

22.

X.J. Yan and J. Van Humbeeck, Temperature and Time Dependence on Recovery Stress Relaxation in Nickel Titanium Wire During Isothermal Holding at High Temperatures, Strain, 2013, 49, p 451–455CrossRef

23.

G. Tadayyon, M. Mazinani, Y. Guo, S.M. Zebarjad, S.A.M. Tofail, and M.J. Biggs, The Effect of Annealing on the Mechanical Properties and Microstructural Evolution of Ti-Rich NiTi Shape Memory Alloys, Mater. Sci. Eng. A, 2016, 662, p p564–p577CrossRef

24.

W. Tillmann and S. Momeni, In-Situ Annealing of NiTi Thin Films at Different Temperatures, Sens. Actuators A Phys., 2015, 221, p 9–14CrossRef

25.

X.B. Wang, B. Verlinden, and J. Van Humbeeck, Effect of Post-Deformation Annealing on the R-Phase Transformation Temperatures in NiTi Shape Memory Alloys, Intermetallics, 2015, 62, p 43–49CrossRef

26.

X.B. Wang, B. Verlinden, and J. Van Humbeeck, R-Phase Transformation in NiTi Alloys, Mater. Sci. Technol., 2014, 30, p 1517–1529CrossRef

27.

Y.J. Zheng, J. Schrooten, L.S. Cui, and J. Van Humbeeck, Constrained Thermoelastic Martensitic Transformation Studied by Modulated DSC, Acta Mater., 2003, 51, p 5467–5475CrossRef

28.

K.A. Tsoi, R. Stalmans, and J. Schrooten, Transformational Behavior of Constrained Shape Memory Alloys, Acta Mater., 2002, 50, p 3535–3544CrossRef

29.

D.Q. Jiang, L.S. Cui, Y.J. Yan, X.Q. Zhao, and Y. Li, Constrained Martensitic Transformation in an In Situ Lamella TiNi/NbTi Shape Memory Composite, Mater. Sci. Eng. A, 2009, 515, p 131–133CrossRef

30.

Y. Li, L.S. Cui, H.B. Xu, and D.Z. Yang, Constrained Phase-Transformation of a TiNi Shape Memory Alloy, Metall. Trans. A, 2003, 34, p 219–223CrossRef

31.

L.S. Cui, Y. Li, Y.J. Zheng, and D.Z. Yang, Two-Stage Recovery Strain of Prestrained TiNi Shape Memory Alloy After Phase Transformations Under Constraint, Mater. Lett., 2001, 47, p 286–289CrossRef

32.

Y. Liu, Y. Liu, and J. Van Humbeeck, Two-Way Shape Memory Effect Developed by Martensite Deformation in NiTi, Acta Metall., 1999, 47, p 199–209

33.

X.J. Yan and J. van Humbeeck, Effect of Annealing on Martensite Stabilization Due to Deformation Via Cooling Under Stress in Cold-Worked NiTi Thin Wire, Mater. Sci. Eng. A, 2012, 558, p 737–741CrossRef

34.

X.J. Yan and J. Van Humbeeck, Evolution of Recovery Stress and Recovery Strain in Annealed NiTi thin Wire During Constrained Thermal Cycling to High Temperature, Adv. Eng. Mater., 2014, 16, p 80–84CrossRef

35.

L.S. Cui and Y.J. Zheng, Self-Tension of Martensite During Constrained Transformation, Mater. Sci. Forum, 2005, 475–479, p 1937–1940CrossRef

Titel: Influence of Annealing Time and Thermo-Mechanical Cycling on Constrained Recovery Properties of a Cold-Worked NiTi Wire
verfasst von: Xiaojun Yan
Yuli Ge
Jan Van Humbeeck
Publikationsdatum: 12.12.2016
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2017
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2468-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2017

Characterization of Surface Films Formed During Corrosion of a Pipeline Steel in H2S Environments

Effect of Sintering Temperature of Mo Skeleton on the Contiguity and Compressive Properties of Mo-Cu IPCs

Molten Pool Behavior and Mechanical Properties of Pulsed Current Double-Sided Synchronization GTA Welded Fe-18Cr-17Mn-Ni-N

Drop Weight Impact Behavior of Al-Si-Cu Alloy Foam-Filled Thin-Walled Steel Pipe Fabricated by Friction Stir Back Extrusion

On the High Temperature Deformation Behaviour of 2507 Super Duplex Stainless Steel

Effect of Build Orientation of Electron Beam Melting on Microstructure and Mechanical Properties of Ti-6Al-4V

Premium Partner

Marktübersichten