Skip to main content
Erschienen in: Production Engineering 4-5/2017

05.07.2017 | Production Process

Influence of asymmetric cutting edge roundings on surface topography

verfasst von: O. Maiss, T. Grove, B. Denkena

Erschienen in: Production Engineering | Ausgabe 4-5/2017

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

For finishing operations in machining, hardened steel hard turning can compete with grinding operations by means of accuracy and productivity. In the past research focussed on the effect of process parameters and tool macro geometry on the resulting surface roughness. Recent investigations show, that the cutting edge micro geometry is an important factor to influence surface quality. The knowledge generated by new methods displays the importance of asymmetric cutting edge roundings on cutting forces, chip formation and tool life. It is known, that chip formation also affects the resulting surface quality. Therefore, this paper investigates the effect of asymmetric cutting edge roundings on the resulting surface roughness in hard turning of roller bearing inner rings. Cutting tests with differently shaped cutting edges and two different feed values are conducted. The resulting surface roughness is measured. The consequent surface quality is explained by geometric coherences between uncut chip thickness and stresses along the cutting edge and the effect of material side flow. It is found, that the cutting edge geometry and the resulting stress distribution around the cutting edge affects the generated surface quality.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Tönshoff HK, Arendt C, Ben Amor R (2000) Cutting of hardened steel. Ann CIRP 49(2):547–566CrossRef Tönshoff HK, Arendt C, Ben Amor R (2000) Cutting of hardened steel. Ann CIRP 49(2):547–566CrossRef
2.
Zurück zum Zitat Brammertz P-H (1961) Die Entstehung der Oberflächenrauheit beim Feindrehen. Industrie-Anzeiger 2:25–32 Brammertz P-H (1961) Die Entstehung der Oberflächenrauheit beim Feindrehen. Industrie-Anzeiger 2:25–32
3.
Zurück zum Zitat Thiele JD, Melkote SN (1999) Effect of cutting edge geometry and workpiece hardness on surface generation in finish hard turning of AISI 52100 steel. J Mater Process Technol 94:216–226CrossRef Thiele JD, Melkote SN (1999) Effect of cutting edge geometry and workpiece hardness on surface generation in finish hard turning of AISI 52100 steel. J Mater Process Technol 94:216–226CrossRef
4.
Zurück zum Zitat Sokolowski AP (1955) Präzision in der Metallbearbeitung. VEB Verlag Technik, Berlin Sokolowski AP (1955) Präzision in der Metallbearbeitung. VEB Verlag Technik, Berlin
5.
Zurück zum Zitat Albrecht P (1960) New developments in the theory of metal-cutting process—part I. ASME Trans J Eng Ind 84(4):348–358CrossRef Albrecht P (1960) New developments in the theory of metal-cutting process—part I. ASME Trans J Eng Ind 84(4):348–358CrossRef
6.
Zurück zum Zitat Brandt X (1995) Titel, Dr.-Ing. Dissertation, Universität Hannover Brandt X (1995) Titel, Dr.-Ing. Dissertation, Universität Hannover
7.
Zurück zum Zitat Denkena B, Grove T, Maiss O (2015) Influence of the cutting edge radius on surface integrity in hard turning of roller bearing inner rings. Prod Eng 9(3):299–305CrossRef Denkena B, Grove T, Maiss O (2015) Influence of the cutting edge radius on surface integrity in hard turning of roller bearing inner rings. Prod Eng 9(3):299–305CrossRef
8.
Zurück zum Zitat Guddat J, M’Saoubi R, Alm P, Meyer D (2011) Hard turning of AISI 52100 using PSBN wiper geometry inserts and the resulting surface integrity. Proc Eng 19:118–124CrossRef Guddat J, M’Saoubi R, Alm P, Meyer D (2011) Hard turning of AISI 52100 using PSBN wiper geometry inserts and the resulting surface integrity. Proc Eng 19:118–124CrossRef
9.
Zurück zum Zitat Grzesik W (2008) Influence of tool wear in surface roughness in hard turning using differently shaped ceramic tools. Wear 265:327–335CrossRef Grzesik W (2008) Influence of tool wear in surface roughness in hard turning using differently shaped ceramic tools. Wear 265:327–335CrossRef
10.
Zurück zum Zitat Pekeharing AJ, Gieszen CA (1971) Material side flow in finish turning. Ann CIRP 20:21–22 Pekeharing AJ, Gieszen CA (1971) Material side flow in finish turning. Ann CIRP 20:21–22
11.
Zurück zum Zitat Kishawy HA, Elbestawi MA (1999) Effects of process parameters on material side flow during hard turning. Int J Mach Tools Manuf 39:1017–1030CrossRef Kishawy HA, Elbestawi MA (1999) Effects of process parameters on material side flow during hard turning. Int J Mach Tools Manuf 39:1017–1030CrossRef
12.
Zurück zum Zitat Liu K, Melkote SN (2006) Effect of plastic side flow on surface roughness in micro-turning process. Int J Mach Tools Manuf 46:1778–1785CrossRef Liu K, Melkote SN (2006) Effect of plastic side flow on surface roughness in micro-turning process. Int J Mach Tools Manuf 46:1778–1785CrossRef
13.
Zurück zum Zitat Denkena B, Koehler J, Rehe M (2012) Influence of the honed cutting edge on tool wear and surface integrity in slot milling of 42CrMo4 steel. Proc CIRP 1:190–195CrossRef Denkena B, Koehler J, Rehe M (2012) Influence of the honed cutting edge on tool wear and surface integrity in slot milling of 42CrMo4 steel. Proc CIRP 1:190–195CrossRef
14.
Zurück zum Zitat Denkena B, Lucas A, Bassett E (2011) Effects of the cutting edge microgeometry on tool wear and its thermo-mechanical load. CIRP Ann Manuf Technol 60(1):73–76CrossRef Denkena B, Lucas A, Bassett E (2011) Effects of the cutting edge microgeometry on tool wear and its thermo-mechanical load. CIRP Ann Manuf Technol 60(1):73–76CrossRef
15.
Zurück zum Zitat Bassett E, Koehler J, Denkena B (2012) On the honed cutting edge and its side effects during orthogonal turning operations of AISI1045 with coated WC-Co inserts. CIRP J Manuf Sci Technol 5(2):108–126CrossRef Bassett E, Koehler J, Denkena B (2012) On the honed cutting edge and its side effects during orthogonal turning operations of AISI1045 with coated WC-Co inserts. CIRP J Manuf Sci Technol 5(2):108–126CrossRef
16.
Zurück zum Zitat Fulemová J, Rehor J (2015) Influence of form factor of the cutting edge on tool life during finishing milling. Proc Eng 100:682–688CrossRef Fulemová J, Rehor J (2015) Influence of form factor of the cutting edge on tool life during finishing milling. Proc Eng 100:682–688CrossRef
17.
Zurück zum Zitat Denkena B, Biermann D (2014) Cutting edge geometries. CIRP Ann Manuf Technol 63(2):631–653CrossRef Denkena B, Biermann D (2014) Cutting edge geometries. CIRP Ann Manuf Technol 63(2):631–653CrossRef
18.
Zurück zum Zitat Altintas Y, Eynian M, Onozuka H (2008) Identification of dynamic cutting force coefficients and chatter stability with process damping. CIRP Ann Manuf Technol 57(1):371–374CrossRef Altintas Y, Eynian M, Onozuka H (2008) Identification of dynamic cutting force coefficients and chatter stability with process damping. CIRP Ann Manuf Technol 57(1):371–374CrossRef
19.
Zurück zum Zitat Rehe M (2015) Herleitung prozessbezogener Kenngrößen der Schneidkantenverrundung im Fräsprozess, Dr.-Ing. Dissertation, Leibniz Universität Hannover Rehe M (2015) Herleitung prozessbezogener Kenngrößen der Schneidkantenverrundung im Fräsprozess, Dr.-Ing. Dissertation, Leibniz Universität Hannover
Metadaten
Titel
Influence of asymmetric cutting edge roundings on surface topography
verfasst von
O. Maiss
T. Grove
B. Denkena
Publikationsdatum
05.07.2017
Verlag
Springer Berlin Heidelberg
Erschienen in
Production Engineering / Ausgabe 4-5/2017
Print ISSN: 0944-6524
Elektronische ISSN: 1863-7353
DOI
https://doi.org/10.1007/s11740-017-0742-7

Weitere Artikel der Ausgabe 4-5/2017

Production Engineering 4-5/2017 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.