Skip to main content
Erschienen in: Tribology Letters 3/2018

01.09.2018 | Original Paper

Influence of Calf Serum on Fretting Behaviors of Ti–6Al–4V and Diamond-Like Carbon Coating for Neck Adapter–Femoral Stem Contact

verfasst von: H. H. Ding, V. Fridrici, G. Bouvard, J. Geringer, Ph. Kapsa

Erschienen in: Tribology Letters | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Influences of newborn calf serum on the fretting behaviors of Ti–6Al–4V and diamond-like carbon coating were investigated using a fretting-wear test rig with a cylinder-on-flat contact. The results indicated that, for the Ti–6Al–4V/Ti–6Al–4V contact, the friction coefficients were high (0.8–1.2) and the wear volumes presented an increase with the increase in the displacement amplitude under dry laboratory air conditions. Under serum-liquid conditions, the Ti–6Al–4V/Ti–6Al–4V contact presented significantly larger wear volumes under the displacement of ± 40 µm; however, it presented significantly lower friction coefficients (0.25–0.35) and significantly smaller wear volumes under the displacement of ± 70 µm. For the DLC coating/Ti–6Al–4V contact, the coating response wear maps could be divided into two areas: the coating working area (low normal force conditions) and the coating failure area (high normal force conditions). In the coating working area, the DLC coating could protect the substrate with low friction, low wear volume, and mild damage in the coating. The presence of serum had a positive influence on the tribological performance of the DLC coating. Furthermore, the positive influence was more significant under larger displacement amplitudes condition.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Anhänge
Nur mit Berechtigung zugänglich
Literatur
1.
Zurück zum Zitat Fokter, S.K., Moličnik, A., Kavalar, R., Pelicon, P., Rudolf, R., Gubeljak, N.: Why do some titanium-alloy total hip arthroplasty modular necks fail? J. Mech. Behav. Biomed. Mater. 69, 107–114 (2017)CrossRef Fokter, S.K., Moličnik, A., Kavalar, R., Pelicon, P., Rudolf, R., Gubeljak, N.: Why do some titanium-alloy total hip arthroplasty modular necks fail? J. Mech. Behav. Biomed. Mater. 69, 107–114 (2017)CrossRef
3.
Zurück zum Zitat Xia, Z., Ricciardi, B.F., Liu, Z., Ruhland, C.V., Ward, M., Lord, A., Hughes, L., Goldring, S.R., Purdue, E., Murray, D., Perino, G.: Nano-analyses of wear particles from metal-on-metal and non-metal-on metal dual modular neck hip arthroplasty. Nanomedicine 13, 1205–1217 (2017)CrossRef Xia, Z., Ricciardi, B.F., Liu, Z., Ruhland, C.V., Ward, M., Lord, A., Hughes, L., Goldring, S.R., Purdue, E., Murray, D., Perino, G.: Nano-analyses of wear particles from metal-on-metal and non-metal-on metal dual modular neck hip arthroplasty. Nanomedicine 13, 1205–1217 (2017)CrossRef
4.
Zurück zum Zitat Ding, H.H., Fridrici, V., Geringer, J., Fontaine, J., Kapsa, Ph: Influence of diamond-like carbon coatings and roughness on fretting behaviors of Ti–6Al–4V for neck adapter–femoral stem contact. Wear 406–407, 53–67 (2018)CrossRef Ding, H.H., Fridrici, V., Geringer, J., Fontaine, J., Kapsa, Ph: Influence of diamond-like carbon coatings and roughness on fretting behaviors of Ti–6Al–4V for neck adapter–femoral stem contact. Wear 406–407, 53–67 (2018)CrossRef
5.
Zurück zum Zitat Fridrici, V., Fouvry, S., Kapsa, Ph: Effect of shot peening on the fretting wear of Ti–6Al–4V. Wear 250, 642–649 (2001)CrossRef Fridrici, V., Fouvry, S., Kapsa, Ph: Effect of shot peening on the fretting wear of Ti–6Al–4V. Wear 250, 642–649 (2001)CrossRef
6.
Zurück zum Zitat Van Peteghem, B., Fouvry, S., Petit, J.: Effect of variable normal force and frequency on fretting wear response of Ti–6Al–4V contact. Wear 271, 1535–1542 (2011)CrossRef Van Peteghem, B., Fouvry, S., Petit, J.: Effect of variable normal force and frequency on fretting wear response of Ti–6Al–4V contact. Wear 271, 1535–1542 (2011)CrossRef
7.
Zurück zum Zitat Jauch, S.Y., Huber, G., Haschke, H., Sellenschloh, K., Morlock, M.M.: Design parameters and the material coupling are decisive for the micromotion magnitude at the stem–neck interface of bi-modular hip implants. Med. Eng. Phys. 36, 300–307 (2014)CrossRef Jauch, S.Y., Huber, G., Haschke, H., Sellenschloh, K., Morlock, M.M.: Design parameters and the material coupling are decisive for the micromotion magnitude at the stem–neck interface of bi-modular hip implants. Med. Eng. Phys. 36, 300–307 (2014)CrossRef
8.
Zurück zum Zitat Love, C.A., Cook, R.B., Harvey, T.J., Dearnley, P.A., Wood, R.J.K.: Diamond like carbon coatings for potential application in biological implants—a review. Tribol. Int. 63, 141–150 (2013)CrossRef Love, C.A., Cook, R.B., Harvey, T.J., Dearnley, P.A., Wood, R.J.K.: Diamond like carbon coatings for potential application in biological implants—a review. Tribol. Int. 63, 141–150 (2013)CrossRef
9.
Zurück zum Zitat Du, D.X., Liu, D.X., Ye, Z.Y., Zhang, X.H., Li, F.Q., Zhou, Z.Q., Yu, L.: Fretting wear and fretting fatigue behaviors of diamond-like carbon and graphite-like carbon films deposited on Ti-6Al-4V alloy. Appl. Surf. Sci. 313, 462–469 (2014)CrossRef Du, D.X., Liu, D.X., Ye, Z.Y., Zhang, X.H., Li, F.Q., Zhou, Z.Q., Yu, L.: Fretting wear and fretting fatigue behaviors of diamond-like carbon and graphite-like carbon films deposited on Ti-6Al-4V alloy. Appl. Surf. Sci. 313, 462–469 (2014)CrossRef
10.
Zurück zum Zitat Amanov, A., Watabe, T., Tsuboi, R., Sasaki, S.: Fretting wear and fracture behaviors of Cr-doped and non-doped DLC films deposited on Ti–6Al–4V alloy by unbalanced magnetron sputtering. Tribol. Int. 62, 49–57 (2013)CrossRef Amanov, A., Watabe, T., Tsuboi, R., Sasaki, S.: Fretting wear and fracture behaviors of Cr-doped and non-doped DLC films deposited on Ti–6Al–4V alloy by unbalanced magnetron sputtering. Tribol. Int. 62, 49–57 (2013)CrossRef
11.
Zurück zum Zitat Zhang, Z.X., Dong, H., Bell, T., Xu, B.S.: The effect of deep-case oxygen hardening on the tribological behaviour of a-C:H DLC coatings on Ti6Al4V alloy. J. Alloy. Compd. 464, 519–525 (2008)CrossRef Zhang, Z.X., Dong, H., Bell, T., Xu, B.S.: The effect of deep-case oxygen hardening on the tribological behaviour of a-C:H DLC coatings on Ti6Al4V alloy. J. Alloy. Compd. 464, 519–525 (2008)CrossRef
12.
Zurück zum Zitat Robertson, J.: Diamond-like amorphous carbon. Mater. Sci. Eng. R 37, 129–281 (2002)CrossRef Robertson, J.: Diamond-like amorphous carbon. Mater. Sci. Eng. R 37, 129–281 (2002)CrossRef
13.
Zurück zum Zitat Bewilogua, K., Hofmann, D.: History of diamond-like carbon films—from first experiments to worldwide applications. Surf. Coat. Technol. 242, 214–225 (2014)CrossRef Bewilogua, K., Hofmann, D.: History of diamond-like carbon films—from first experiments to worldwide applications. Surf. Coat. Technol. 242, 214–225 (2014)CrossRef
14.
Zurück zum Zitat Fontaine, J.: Towards the use of diamond-like carbon solid lubricant coatings in vacuum and space environments. Proc. IMechE Part J 222, 1015–1029 (2008)CrossRef Fontaine, J.: Towards the use of diamond-like carbon solid lubricant coatings in vacuum and space environments. Proc. IMechE Part J 222, 1015–1029 (2008)CrossRef
15.
Zurück zum Zitat Grill, A.: Diamond-like carbon: state of the art. Diam. Relat. Mater. 8, 428–434 (1999)CrossRef Grill, A.: Diamond-like carbon: state of the art. Diam. Relat. Mater. 8, 428–434 (1999)CrossRef
16.
Zurück zum Zitat Grill, A.: Review of the tribology of diamond-like carbon. Wear 168, 143–153 (1993)CrossRef Grill, A.: Review of the tribology of diamond-like carbon. Wear 168, 143–153 (1993)CrossRef
17.
Zurück zum Zitat Hauert, R.: An overview on the tribological behavior of diamond-like carbon in technical and medical applications. Tribol. Int. 37, 991–1003 (2004)CrossRef Hauert, R.: An overview on the tribological behavior of diamond-like carbon in technical and medical applications. Tribol. Int. 37, 991–1003 (2004)CrossRef
18.
Zurück zum Zitat Chhowalla, M., Robertson, J., Chen, C.W., Silva, S.R.P., Davis, C.A., Amaratunga, G.A.J., Milne, W.I.: Influence of ion energy and substrate temperature on the optical and electronic properties of tetrahedral amorphous carbon (ta-C) films. J. Appl. Phys. 81, 139–145 (1997)CrossRef Chhowalla, M., Robertson, J., Chen, C.W., Silva, S.R.P., Davis, C.A., Amaratunga, G.A.J., Milne, W.I.: Influence of ion energy and substrate temperature on the optical and electronic properties of tetrahedral amorphous carbon (ta-C) films. J. Appl. Phys. 81, 139–145 (1997)CrossRef
19.
Zurück zum Zitat Allen, M., Myer, B., Rushton, N.: In vitro and in vivo investigations into the biocompatibility of diamond-like carbon (DLC) coatings for orthopedic applications. J. Biomed. Mater. Res. 58, 319–328 (2001)CrossRef Allen, M., Myer, B., Rushton, N.: In vitro and in vivo investigations into the biocompatibility of diamond-like carbon (DLC) coatings for orthopedic applications. J. Biomed. Mater. Res. 58, 319–328 (2001)CrossRef
20.
Zurück zum Zitat Taeger, G., Podleska, L.E., Schmidt, B., Ziegler, M., Nast-Kolb, D.: Comparison of diamond-like-carbon and alumina-oxide articulating with polyethylene in total hip arthroplasty. Mater. Sci. Eng. Technol. 34, 1094–1100 (2003) Taeger, G., Podleska, L.E., Schmidt, B., Ziegler, M., Nast-Kolb, D.: Comparison of diamond-like-carbon and alumina-oxide articulating with polyethylene in total hip arthroplasty. Mater. Sci. Eng. Technol. 34, 1094–1100 (2003)
21.
Zurück zum Zitat Swaminathan, V., Gilbert, J.L.: Fretting corrosion of CoCrMo and Ti6Al4V interfaces. Biomaterials 33, 5487–5503 (2012)CrossRef Swaminathan, V., Gilbert, J.L.: Fretting corrosion of CoCrMo and Ti6Al4V interfaces. Biomaterials 33, 5487–5503 (2012)CrossRef
22.
Zurück zum Zitat Royhman, D., Patel, M., Jacobs, J.J., Wimmer, M.A., Hallab, N.J., Mathew, M.T.: In vitro simulation of fretting-corrosion in hip implant modular junctions: the influence of pH. Med. Eng. Phys. 52, 1–9 (2018)CrossRef Royhman, D., Patel, M., Jacobs, J.J., Wimmer, M.A., Hallab, N.J., Mathew, M.T.: In vitro simulation of fretting-corrosion in hip implant modular junctions: the influence of pH. Med. Eng. Phys. 52, 1–9 (2018)CrossRef
23.
Zurück zum Zitat Royhman, D., Patel, M., Runa, M.J., Wimmer, M.A., Jacobs, J.J., Hallab, N.J., Mathew, M.T.: Fretting-corrosion behavior in hip implant modular junctions: the influence of friction energy and pH variation. J. Mech. Behav. Biomed. Mater. 62, 570–587 (2016)CrossRef Royhman, D., Patel, M., Runa, M.J., Wimmer, M.A., Jacobs, J.J., Hallab, N.J., Mathew, M.T.: Fretting-corrosion behavior in hip implant modular junctions: the influence of friction energy and pH variation. J. Mech. Behav. Biomed. Mater. 62, 570–587 (2016)CrossRef
24.
Zurück zum Zitat Baxmann, M., Jauch, S.Y., Schilling, C., Blömer, W., Grupp, T.M., Morlock, M.M.: The influence of contact conditions and micromotions on the fretting behavior of modular titanium alloy taper connections. Med. Eng. Phys. 35, 676–683 (2013)CrossRef Baxmann, M., Jauch, S.Y., Schilling, C., Blömer, W., Grupp, T.M., Morlock, M.M.: The influence of contact conditions and micromotions on the fretting behavior of modular titanium alloy taper connections. Med. Eng. Phys. 35, 676–683 (2013)CrossRef
25.
Zurück zum Zitat Fouvry, S., Kapsa, Ph, Vincent, L.: Analysis of sliding behaviour for fretting loadings: determination of transition criteria. Wear 185, 35–46 (1995)CrossRef Fouvry, S., Kapsa, Ph, Vincent, L.: Analysis of sliding behaviour for fretting loadings: determination of transition criteria. Wear 185, 35–46 (1995)CrossRef
26.
Zurück zum Zitat Fouvry, S., Duo, P., Perruchaut, Ph: A quantitative approach of Ti–6Al–4V fretting damage: friction, wear and crack nucleation. Wear 257, 916–929 (2004)CrossRef Fouvry, S., Duo, P., Perruchaut, Ph: A quantitative approach of Ti–6Al–4V fretting damage: friction, wear and crack nucleation. Wear 257, 916–929 (2004)CrossRef
27.
Zurück zum Zitat Alves, V.A., Reis, R.Q., Santos, I.C.B., Souza, D.G., Gonçalves, TdeF., Pereira-da-Silva, M.A., Rossi, A., da Silva, L.A.: In situ impedance spectroscopy study of the electrochemical corrosion of Ti and Ti–6Al–4V in simulated body fluid at 25 and 37 °C. Corros. Sci. 51, 2473–2482 (2009)CrossRef Alves, V.A., Reis, R.Q., Santos, I.C.B., Souza, D.G., Gonçalves, TdeF., Pereira-da-Silva, M.A., Rossi, A., da Silva, L.A.: In situ impedance spectroscopy study of the electrochemical corrosion of Ti and Ti–6Al–4V in simulated body fluid at 25 and 37 °C. Corros. Sci. 51, 2473–2482 (2009)CrossRef
28.
Zurück zum Zitat Khan, M.A., Williams, R.L., Williams, D.F.: The corrosion behaviour of Ti–6Al–4V, Ti–6Al–7Nb and Ti–13Nb–13Zr in protein solutions. Biomaterials 20, 631–637 (1999)CrossRef Khan, M.A., Williams, R.L., Williams, D.F.: The corrosion behaviour of Ti–6Al–4V, Ti–6Al–7Nb and Ti–13Nb–13Zr in protein solutions. Biomaterials 20, 631–637 (1999)CrossRef
29.
Zurück zum Zitat Kuncicka, L., Kocich, R., Lowe, T.C.: Advances in metals and alloys for joint replacement. Prog. Mater. Sci. 88, 232–280 (2017)CrossRef Kuncicka, L., Kocich, R., Lowe, T.C.: Advances in metals and alloys for joint replacement. Prog. Mater. Sci. 88, 232–280 (2017)CrossRef
Metadaten
Titel
Influence of Calf Serum on Fretting Behaviors of Ti–6Al–4V and Diamond-Like Carbon Coating for Neck Adapter–Femoral Stem Contact
verfasst von
H. H. Ding
V. Fridrici
G. Bouvard
J. Geringer
Ph. Kapsa
Publikationsdatum
01.09.2018
Verlag
Springer US
Erschienen in
Tribology Letters / Ausgabe 3/2018
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-018-1069-z

Weitere Artikel der Ausgabe 3/2018

Tribology Letters 3/2018 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.