Skip to main content
Erschienen in: Arabian Journal for Science and Engineering 10/2020

17.04.2020 | Research Article-Civil Engineering

Influence of Chloroprene Rubber Latex on Set Times and Early Hydration of Cement

verfasst von: Izhar Ahmad, Kashif Ali Khan, Tahir Ahmad

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 10/2020

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This study was carried out in order to investigate retardation time of chloroprene rubber (CR) latex on the cementitious system in relation to its effect on the heat of hydration of cementitious system. Set times, consistency and heat evolution tests were carried out on ordinary Portland cement (OPC). Three different curing environments were selected with different CR to cement ratio i.e., 0%, 5%, 10%, 15% and 20%. The data revealed that consistency was increased under high temperature and low relative humidity for cement pastes. While achieving standard consistency, water required by the controlled specimen was reduced by 43% with the addition of 20% CR latex. Regarding heat of hydration, it was found that heat of hydration of latex-modified cement pastes was higher than the controlled cement paste after 48 h.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Soroka, I.; Ravina, D.: Hot weather concreting with admixtures. Cem. Concr. Compos. 20(2–3), 129–136 (1998)CrossRef Soroka, I.; Ravina, D.: Hot weather concreting with admixtures. Cem. Concr. Compos. 20(2–3), 129–136 (1998)CrossRef
2.
Zurück zum Zitat Thomas, J.J.; Rothstein, D.; Jennings, H.M.; Christensen, B.J.: Effect of hydration temperature on the solubility behavior of Ca-, S-, Al-, and Si-bearing solid phases in Portland cement pastes. Cem. Concr. Res. 33(12), 2037–2047 (2003)CrossRef Thomas, J.J.; Rothstein, D.; Jennings, H.M.; Christensen, B.J.: Effect of hydration temperature on the solubility behavior of Ca-, S-, Al-, and Si-bearing solid phases in Portland cement pastes. Cem. Concr. Res. 33(12), 2037–2047 (2003)CrossRef
3.
Zurück zum Zitat Wade, S.A.; Nixon, J.M.; Schindler, A.K.; Barnes, R.W.: Effect of temperature on the setting behavior of concrete. J. Mater. Civ. Eng. 22(3), 214–222 (2010)CrossRef Wade, S.A.; Nixon, J.M.; Schindler, A.K.; Barnes, R.W.: Effect of temperature on the setting behavior of concrete. J. Mater. Civ. Eng. 22(3), 214–222 (2010)CrossRef
4.
Zurück zum Zitat Khan, B.; Baradan, B.: The effect of sugar on setting-time of various types of cements. Q. Sci. Vis. 8(1), 71–78 (2002) Khan, B.; Baradan, B.: The effect of sugar on setting-time of various types of cements. Q. Sci. Vis. 8(1), 71–78 (2002)
5.
Zurück zum Zitat ASTM International: ASTM C1 91 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle (2013) ASTM International: ASTM C1 91 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle (2013)
6.
Zurück zum Zitat Ujhelyi, J.E.; Ibrahim, A.J.: Hot weather concreting with hydraulic additives. Cem. Concr. Res. 21(2–3), 345–354 (1991)CrossRef Ujhelyi, J.E.; Ibrahim, A.J.: Hot weather concreting with hydraulic additives. Cem. Concr. Res. 21(2–3), 345–354 (1991)CrossRef
7.
Zurück zum Zitat Berge, O.: Improving the properties of hot-mixed concrete using retarding admixtures. J. Proc. 73(7), 394–398 (1976) Berge, O.: Improving the properties of hot-mixed concrete using retarding admixtures. J. Proc. 73(7), 394–398 (1976)
8.
Zurück zum Zitat Khan, K.A.; Ahmad, I.; Alam, M.: Effect of ethylene vinyl acetate (EVA) on the setting time of cement at different temperatures as well as on the mechanical strength of concrete. Arab. J. Sci. Eng. 44(5), 4075–4084 (2019)CrossRef Khan, K.A.; Ahmad, I.; Alam, M.: Effect of ethylene vinyl acetate (EVA) on the setting time of cement at different temperatures as well as on the mechanical strength of concrete. Arab. J. Sci. Eng. 44(5), 4075–4084 (2019)CrossRef
9.
Zurück zum Zitat Piqué, T.M.; Balzamo, H.; Vázquez, A.: Evaluation of the hydration of Portland cement modified with polyvinyl alcohol and nano clay. In: Key Engineering Materials, vol. 466, Trans Tech Publications, pp. 47–56 (2011). Piqué, T.M.; Balzamo, H.; Vázquez, A.: Evaluation of the hydration of Portland cement modified with polyvinyl alcohol and nano clay. In: Key Engineering Materials, vol. 466, Trans Tech Publications, pp. 47–56 (2011).
10.
Zurück zum Zitat Qu, X.; Zhao, X.: Influence of SBR latex and HPMC on the cement hydration at early age. Case Stud. Constr. Mater. 6, 213–218 (2017) Qu, X.; Zhao, X.: Influence of SBR latex and HPMC on the cement hydration at early age. Case Stud. Constr. Mater. 6, 213–218 (2017)
11.
Zurück zum Zitat Zhang, G.F., Wang, P.M.: Effect of hydroxyethyl methyl cellulose on cement paste hydration. J. Tongji Univ. (Nat. Sci.), 3 (2009). Zhang, G.F., Wang, P.M.: Effect of hydroxyethyl methyl cellulose on cement paste hydration. J. Tongji Univ. (Nat. Sci.), 3 (2009).
12.
Zurück zum Zitat Frigione, M.: Concrete with polymers. In: Eco-efficient concrete, Woodhead Publishing, pp. 386–436 (2013). Frigione, M.: Concrete with polymers. In: Eco-efficient concrete, Woodhead Publishing, pp. 386–436 (2013).
13.
Zurück zum Zitat Ohama, Y.: Polymer-based admixtures. Cem. Concr. Compos. 20(2–3), 189–212 (1998)CrossRef Ohama, Y.: Polymer-based admixtures. Cem. Concr. Compos. 20(2–3), 189–212 (1998)CrossRef
14.
Zurück zum Zitat Meng, W.: Basic mechanical properties research of SAE latex-modified mortar. In: Advanced materials research, vol. 1088, Trans Tech Publications, pp. 621–625 (2015) Meng, W.: Basic mechanical properties research of SAE latex-modified mortar. In: Advanced materials research, vol. 1088, Trans Tech Publications, pp. 621–625 (2015)
15.
Zurück zum Zitat Aminabhavi, T.M.; Cassidy, P.E.; Kukacka, L.E.: Use of polymers in concrete technology. J. Macromol. Sci. Part C Polym. Rev. 22(1), 1–55 (1982)CrossRef Aminabhavi, T.M.; Cassidy, P.E.; Kukacka, L.E.: Use of polymers in concrete technology. J. Macromol. Sci. Part C Polym. Rev. 22(1), 1–55 (1982)CrossRef
16.
Zurück zum Zitat Wang, R.; Yao, L.; Wang, P.: Mechanism analysis and effect of styrene–acrylate copolymer powder on cement hydrates. Constr. Build. Mater. 41, 538–544 (2013)CrossRef Wang, R.; Yao, L.; Wang, P.: Mechanism analysis and effect of styrene–acrylate copolymer powder on cement hydrates. Constr. Build. Mater. 41, 538–544 (2013)CrossRef
17.
Zurück zum Zitat Singh, N.B.; Rai, S.: Effect of polyvinyl alcohol on the hydration of cement with rice husk ash. Cem. Concr. Res. 31(2), 239–243 (2001)CrossRef Singh, N.B.; Rai, S.: Effect of polyvinyl alcohol on the hydration of cement with rice husk ash. Cem. Concr. Res. 31(2), 239–243 (2001)CrossRef
18.
Zurück zum Zitat Peschard, A.; Govin, A.; Grosseau, P.; Guilhot, B.; Guyonnet, R.: Effect of polysaccharides on the hydration of cement paste at early ages. Cem. Concr. Res. 34(11), 2153–2158 (2004)CrossRef Peschard, A.; Govin, A.; Grosseau, P.; Guilhot, B.; Guyonnet, R.: Effect of polysaccharides on the hydration of cement paste at early ages. Cem. Concr. Res. 34(11), 2153–2158 (2004)CrossRef
19.
Zurück zum Zitat Silva, D.A.D.; Roman, H.R.; Gleize, P.J.P.: Evidences of chemical interaction between EVA and hydrating Portland cement. Cem. Concr. Res. 32(9), 1383–1390 (2002)CrossRef Silva, D.A.D.; Roman, H.R.; Gleize, P.J.P.: Evidences of chemical interaction between EVA and hydrating Portland cement. Cem. Concr. Res. 32(9), 1383–1390 (2002)CrossRef
20.
Zurück zum Zitat Betioli, A.M.; Gleize, P.J.P.; Silva, D.A.; John, V.M.; Pileggi, R.G.: Effect of HMEC on the consolidation of cement pastes: isothermal calorimetry versus oscillatory rheometry. Cem. Concr. Res. 39(5), 440–445 (2009)CrossRef Betioli, A.M.; Gleize, P.J.P.; Silva, D.A.; John, V.M.; Pileggi, R.G.: Effect of HMEC on the consolidation of cement pastes: isothermal calorimetry versus oscillatory rheometry. Cem. Concr. Res. 39(5), 440–445 (2009)CrossRef
21.
Zurück zum Zitat Zhang, G.F.; Wang, P.M.: Effects of vinyl redispersible polymer on cement hydration products. J. Build. Mater. 13(2), 143–149 (2010) Zhang, G.F.; Wang, P.M.: Effects of vinyl redispersible polymer on cement hydration products. J. Build. Mater. 13(2), 143–149 (2010)
22.
Zurück zum Zitat Wang, R.; Li, X.G.; Wang, P.M.: Influence of polymer on cement hydration in SBR-modified cements pastes. Cem. Concr. Res. 36(9), 1744–1751 (2006)MathSciNetCrossRef Wang, R.; Li, X.G.; Wang, P.M.: Influence of polymer on cement hydration in SBR-modified cements pastes. Cem. Concr. Res. 36(9), 1744–1751 (2006)MathSciNetCrossRef
23.
Zurück zum Zitat Yang, Z.; Shi, X.; Creighton, A.T.; Peterson, M.M.: Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar. Constr. Build. Mater. 23(6), 2283–2290 (2009)CrossRef Yang, Z.; Shi, X.; Creighton, A.T.; Peterson, M.M.: Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar. Constr. Build. Mater. 23(6), 2283–2290 (2009)CrossRef
24.
Zurück zum Zitat Justnes, H., Engineer, S.S.: Polymer cement concrete (PCC)-of interest for concrete block paving? In: The 2nd International Workshop on Concrete Block Paving, Oslo, Norway, pp. 291–298 (1994 Justnes, H., Engineer, S.S.: Polymer cement concrete (PCC)-of interest for concrete block paving? In: The 2nd International Workshop on Concrete Block Paving, Oslo, Norway, pp. 291–298 (1994
25.
Zurück zum Zitat Park, Y.S.; Suh, J.K.: Comparative study on compressive strength of concrete with new sand-cap and neoprene pad. Int. J. Concr. Struct. Mater. 2(1), 15–19 (2008)CrossRef Park, Y.S.; Suh, J.K.: Comparative study on compressive strength of concrete with new sand-cap and neoprene pad. Int. J. Concr. Struct. Mater. 2(1), 15–19 (2008)CrossRef
26.
Zurück zum Zitat Magliulo, G.; Capozzi, V.; Fabbrocino, G.; Manfredi, G.: Neoprene–concrete friction relationships for seismic assessment of existing precast buildings. Eng. Struct. 33(2), 532–538 (2011)CrossRef Magliulo, G.; Capozzi, V.; Fabbrocino, G.; Manfredi, G.: Neoprene–concrete friction relationships for seismic assessment of existing precast buildings. Eng. Struct. 33(2), 532–538 (2011)CrossRef
27.
Zurück zum Zitat Cooke, G.B.: U.S. Patent No. 2,227,533. Washington, DC: U.S. Patent and Trademark Office (1941). Cooke, G.B.: U.S. Patent No. 2,227,533. Washington, DC: U.S. Patent and Trademark Office (1941).
28.
Zurück zum Zitat Ohama, Y.: Handbook of polymer-modified concrete and mortars: properties and process technology. William Andrew (1995) Ohama, Y.: Handbook of polymer-modified concrete and mortars: properties and process technology. William Andrew (1995)
29.
Zurück zum Zitat Liu, H.; Wang, X.; Jiao, Y.; Sha, T.: Experimental investigation of the mechanical and durability properties of crumb rubber concrete. Materials 9(3), 172 (2016)CrossRef Liu, H.; Wang, X.; Jiao, Y.; Sha, T.: Experimental investigation of the mechanical and durability properties of crumb rubber concrete. Materials 9(3), 172 (2016)CrossRef
30.
Zurück zum Zitat ASTM, C.187–04, standard test method for normal consistency of hydraulic cement. Annual book of ASTM standards, vol. 4, pp. 176–178 (2006) ASTM, C.187–04, standard test method for normal consistency of hydraulic cement. Annual book of ASTM standards, vol. 4, pp. 176–178 (2006)
31.
Zurück zum Zitat ASTM, C.: 191-08. Standard test methods for time of setting of hydraulic cement by vicat needle. West Conshohocken, PA: ASTM International (2008) ASTM, C.: 191-08. Standard test methods for time of setting of hydraulic cement by vicat needle. West Conshohocken, PA: ASTM International (2008)
32.
Zurück zum Zitat Nelson, E.B.: Well cementing (developments in petroleum science) (1990) Nelson, E.B.: Well cementing (developments in petroleum science) (1990)
33.
Zurück zum Zitat Ramalho, R.V.A.; Alves, S.M.; de Oliveira Freitas, J.C.; de Sena Costa, B.L.; Bezerra, U.T.: Evaluation of mechanical properties of cement slurries containing SBR latex subjected to high temperatures. J. Pet. Sci. Eng. 178, 787–794 (2019)CrossRef Ramalho, R.V.A.; Alves, S.M.; de Oliveira Freitas, J.C.; de Sena Costa, B.L.; Bezerra, U.T.: Evaluation of mechanical properties of cement slurries containing SBR latex subjected to high temperatures. J. Pet. Sci. Eng. 178, 787–794 (2019)CrossRef
34.
Zurück zum Zitat Sun, S.A., Fei, Y.W., Xiao, Y.P., Yang, H.W., Zong, Z.M.: Preparation of flexible polymer-cement mortar. In: Advanced Materials Research, vol. 299, Trans Tech Publications, pp. 708–711 (2011) Sun, S.A., Fei, Y.W., Xiao, Y.P., Yang, H.W., Zong, Z.M.: Preparation of flexible polymer-cement mortar. In: Advanced Materials Research, vol. 299, Trans Tech Publications, pp. 708–711 (2011)
35.
Zurück zum Zitat Wang, R.; Wang, P.M.: Physical properties of SBR latex-modified mortar under different curing conditions. J. Chin. Ceram. Soc. 37, 2118–2123 (2009) Wang, R.; Wang, P.M.: Physical properties of SBR latex-modified mortar under different curing conditions. J. Chin. Ceram. Soc. 37, 2118–2123 (2009)
36.
Zurück zum Zitat Figmig, R., Estokova, A.: Study of temperature influence of cement and water on the fresh cement paste consistency. In: IOP Conference Series: Materials Science and Engineering, vol. 549, no. 1, IOP Publishing, p. 012031 (2019) Figmig, R., Estokova, A.: Study of temperature influence of cement and water on the fresh cement paste consistency. In: IOP Conference Series: Materials Science and Engineering, vol. 549, no. 1, IOP Publishing, p. 012031 (2019)
37.
Zurück zum Zitat Heikal, M.: Effect of temperature on the structure and strength properties of cement pastes containing fly ash alone or in combination with limestone. Ceram. Silikaty 50(3), 167 (2006) Heikal, M.: Effect of temperature on the structure and strength properties of cement pastes containing fly ash alone or in combination with limestone. Ceram. Silikaty 50(3), 167 (2006)
38.
Zurück zum Zitat Ezziane, K.; Kadri, E.H.; Hallal, A.; Duval, R.: Effect of mineral additives on the setting of blended cement by the maturity method. Mater. Struct. 43(3), 393–401 (2010)CrossRef Ezziane, K.; Kadri, E.H.; Hallal, A.; Duval, R.: Effect of mineral additives on the setting of blended cement by the maturity method. Mater. Struct. 43(3), 393–401 (2010)CrossRef
39.
Zurück zum Zitat Shi, X.X., Wang, R., Wang, P.M.: Dispersion and absorption of SBR latex in the system of mono-dispersed cement particles in water. In: Advanced Materials Research, vol. 687, Trans Tech Publications, pp. 347–353 (2013) Shi, X.X., Wang, R., Wang, P.M.: Dispersion and absorption of SBR latex in the system of mono-dispersed cement particles in water. In: Advanced Materials Research, vol. 687, Trans Tech Publications, pp. 347–353 (2013)
40.
Zurück zum Zitat Sivakumar, M.V.N.: Effect of Polymer modification on mechanical and structural properties of concrete—an experimental investigation. Int. J. Civ. Struct. Eng. 1(4), 732 (2011) Sivakumar, M.V.N.: Effect of Polymer modification on mechanical and structural properties of concrete—an experimental investigation. Int. J. Civ. Struct. Eng. 1(4), 732 (2011)
41.
Zurück zum Zitat Wang, P.M.; Feng, S.X.; Liu, X.P.: Research approaches of cement hydration degree and their development. J. Build. Mater. 6, 1–10 (2005) Wang, P.M.; Feng, S.X.; Liu, X.P.: Research approaches of cement hydration degree and their development. J. Build. Mater. 6, 1–10 (2005)
Metadaten
Titel
Influence of Chloroprene Rubber Latex on Set Times and Early Hydration of Cement
verfasst von
Izhar Ahmad
Kashif Ali Khan
Tahir Ahmad
Publikationsdatum
17.04.2020
Verlag
Springer Berlin Heidelberg
Erschienen in
Arabian Journal for Science and Engineering / Ausgabe 10/2020
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI
https://doi.org/10.1007/s13369-020-04521-7

Weitere Artikel der Ausgabe 10/2020

Arabian Journal for Science and Engineering 10/2020 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.