Skip to main content
main-content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

13.11.2019 | Original Research | Ausgabe 6/2020 Open Access

International Journal of Material Forming 6/2020

Influence of component design on extrusion processes in sheet-bulk metal forming

Zeitschrift:
International Journal of Material Forming > Ausgabe 6/2020
Autoren:
F. Pilz, M. Merklein
Wichtige Hinweise

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Abstract

Nowadays, the functional integration of workpieces challenges existing forming processes. The combination of established forming processes – like sheet metal and bulk forming – offers the possibility to counter this issue. The application of bulk forming operations on sheet metal semi-finished products, also called sheet-bulk metal forming (SBMF), is an innovative approach. The potential of SBMF cannot be fully exploited, as there are no recommendations in terms of workpiece design and layout influence on the process result. Therefore, this paper focuses on the analysis of semi-finished products and component design parameters on resulting part and process properties in two extrusion processes in SBMF. The investigation is based on a combined numerical and experimental approach. It is shown that the investigated design parameters, in addition to the achievable dimensional accuracy, substantially influence the occurring tool loads as well as the required process forces.
Literatur
Über diesen Artikel

Weitere Artikel der Ausgabe 6/2020

International Journal of Material Forming 6/2020 Zur Ausgabe

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise