nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Influence of EDM Factors on Surface Roughness and Material Removal Speed When Machining SKD11 Steel

verfasst von : Trinh Kieu Tuan, Do Thi Tam, Tran Ngoc Huy Thinh, Le Hoang Anh, Nguyen Huu Quang, Bui Thanh Danh, Tran Ngoc Giang, Nguyen Manh Cuong

Erschienen in: Advances in Engineering Research and Application

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, the results of a multi-objective optimization problem of electric discharge machining (EDM) of cylindrically shaped parts are reported. Two objectives, surface roughness (SR) and material removal speed (MRS), were selected for the multi-objective problem. In addition, SKD11 steel and 4 main EDM parameters, including the pulse on time, the pulse off time, the servo current, and the servo voltage, were investigated. The influence of these parameters on the SR and the MRS was analyzed using Taguchi and Gray Relation Analysis methods. Moreover, the optimal input factors to ensure simultaneous two targets, the SR and the MRS, have been shown. The proposed model has been also evaluated with the conclusion that it is completely consistent with the experimental data.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel The Influence of Drivetrain Layout on Lateral Vehicle Dynamic

Nächstes Kapitel Influence of Input Parameters on Sieving Efficiency for Dewatering Vibration Screen Systems

Rahman, M.M., Khan, A.R., Noor, M.M., Kadirgama, K., Bakar, R.A.: Optimization of machining parameters on surface roughness in EDM of Ti-6Al-4V using response surface method. Adv. Mater. Res. 213, 402–408 (2011)CrossRef

Hoang, T.T., et al.: Modelling surface finish in electrical discharge machining tablet shape punches using response surface methodology. SSRG Int. J. Mech. Eng 4(9), 28–30 (2017)CrossRef

Hung, L.X., Hoang, T.T., Pi, V.N.: A study on modelling surface finish in electrical discharge machining tablet shape punches using response surface methodology. J. Environ. Sci. Eng. B 6(7), 387–390 (2017)

Hong, T.T., et al.: Evaluating influences of input parameters on surface roughness in sinking EDM cylindrical shaped parts. Mater. Sci. Forum 1018, 85–90 (2021)CrossRef

Pradhan, M.K., Biswas, C.K.: Modelling of machining parameters for MRR in EDM using response surface methodology (2008)

Iqbal, A., Khan, A.A.: Modeling and analysis of MRR, EWR and surface roughness in EDM milling through response surface methodology. Am. J. Eng. Appl. Sci. 3(4), 611–619 (2010)CrossRef

Van Cuong, N., et al.: Influence of process parameters on electrode wear in electrical discharge machining cylindrical shaped parts. Key Eng. Mater. 853, 24–28 (2020)CrossRef

Phan, N., et al.: Tool wear rate analysis of uncoated and AlCrNi coated aluminum electrode in EDM for Ti-6Al-4 V titanium alloy. In: Sattler, K.-U., Nguyen, D.C., Ngoc Pi, V., Long, B.T., Puta, H. (eds.) Advances in Engineering Research and Application: Proceedings of the International Conference on Engineering Research and Applications, ICERA 2020, pp. 832–838. Springer International Publishing, Cham (2021). https://doi.org/10.1007/978-3-030-64719-3_91CrossRef

Tharian, B.K., et al.: Multi-objective parametric optimization in EDM using grey relational analysis. Mater. Today: Proc. 16, 1013–1019 (2019)

10.

Kumar, S., Dhanabalan, S., Narayanan, C.S.: Application of ANFIS and GRA for multi-objective optimization of optimal wire-EDM parameters while machining Ti–6Al–4V alloy. SN Appl. Sci. 1(4), 1–12 (2019)

11.

Ky, L.H., et al.: Multi-objective optimization of surface roughness and electrode wear in EDM cylindrical shaped parts. Mater. Sci. Forum 1018, 59–64 (2021)CrossRef

12.

Prabhu, S., Vinayagam, B.K.: Multiresponse optimization of EDM process with nanofluids using TOPSIS method and genetic algorithm. Archiv. Mech. Eng. 63(1), 45–71 (2016)CrossRef

13.

Pattnaik, S., et al.: Multi objective optimization of EDM process parameters using fuzzy TOPSIS method. In: 2015 International Conference on Innovations in Information, Embedded and Communication Systems (ICIIECS). IEEE (2015)

14.

Majumder, A., et al.: An approach to optimize the EDM process parameters using desirability-based multi-objective PSO. Prod. Manuf. Res. 2(1), 228–240 (2014)

15.

Majumder, A.: Process parameter optimization during EDM of AISI 316 LN stainless steel by using fuzzy based multi-objective PSO. J. Mech. Sci. Technol. 27(7), 2143–2151 (2013)CrossRef

16.

Radhika, N., et al.: Multi-objective optimization of EDM parameters using grey relation analysis. J. Eng. Sci. Technol. 10(1), 1–11 (2015)

17.

Hong, T., et al.: Effects of input parameters on electrode wear rate when EDM cylindrical shaped parts. Mater. Sci. Forum 1018, 79–83 (2021)CrossRef

Titel: Influence of EDM Factors on Surface Roughness and Material Removal Speed When Machining SKD11 Steel
verfasst von: Trinh Kieu Tuan
Do Thi Tam
Tran Ngoc Huy Thinh
Le Hoang Anh
Nguyen Huu Quang
Bui Thanh Danh
Tran Ngoc Giang
Nguyen Manh Cuong
Verlag: Springer International Publishing
Buch: Advances in Engineering Research and Application
Print ISBN: 978-3-030-92573-4

Electronic ISBN: 978-3-030-92574-1

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-030-92574-1_54

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht