Skip to main content
Erschienen in: Metallurgical and Materials Transactions A 11/2013

01.11.2013 | Communication

Influence of Grain-Refiner Addition on the Morphology of Fe-Bearing Intermetallics in a Semi-Solid Processed Al-Mg-Si Alloy

verfasst von: Tahsina Smith, Keyna O’Reilly, Sundaram Kumar, Ian Stone

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 11/2013

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The three-dimensional morphologies of the Fe-bearing intermetallics in a semisolid-processed Al-Mg-Si alloy were examined after extracting the intermetallics. α c-AlFeSi and β-AlFeSi are the major Fe-bearing intermetallics. Addition of Al-Ti-B grain refiner typically promotes β-AlFeSi formation. β-AlFeSi was observed with a flat, plate-like morphology with angular edges in the alloy with and without grain refiner, whereas α c-AlFeSi was observed as “flower”-like morphology in the alloy with grain refiner.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat I.J. Polmear: Light Alloys: Metallurgy of the Light Metals, second ed., London: Edward Arnold, 1989. I.J. Polmear: Light Alloys: Metallurgy of the Light Metals, second ed., London: Edward Arnold, 1989.
2.
3.
Zurück zum Zitat G. Sha, K.A.Q. OReilly, B. Cantor, J. Worth, and R. Hamerton: Mater. Sci. Eng. A, 2001, vol. 304306, pp. 612-616. G. Sha, K.A.Q. OReilly, B. Cantor, J. Worth, and R. Hamerton: Mater. Sci. Eng. A, 2001, vol. 304306, pp. 612-616.
4.
Zurück zum Zitat N.C.W. Kuijpers, W.H. Kool, P.T.G. Koenis, K.E. Nilsen, I. Todd, and S. van der Zwaag: Mater. Char., 2003, vol. 49, pp. 409-420.CrossRef N.C.W. Kuijpers, W.H. Kool, P.T.G. Koenis, K.E. Nilsen, I. Todd, and S. van der Zwaag: Mater. Char., 2003, vol. 49, pp. 409-420.CrossRef
5.
Zurück zum Zitat L. Sweet, S.M. Zhi, S.X. Gao, J.A. Taiylor, and M.A. Easton: Metall. Mater. Trans. A, 2011, vol. 42, pp. 1737-1749.CrossRef L. Sweet, S.M. Zhi, S.X. Gao, J.A. Taiylor, and M.A. Easton: Metall. Mater. Trans. A, 2011, vol. 42, pp. 1737-1749.CrossRef
6.
Zurück zum Zitat S. Kumar, P.S. Grant, and K.A.Q. O’Reilly: Trans. Ind. Inst. Metals, 2012, vol. 65, pp. 553-557.CrossRef S. Kumar, P.S. Grant, and K.A.Q. O’Reilly: Trans. Ind. Inst. Metals, 2012, vol. 65, pp. 553-557.CrossRef
7.
Zurück zum Zitat L.F. Mondolfo: Aluminum alloys, structure and properties, Butterworths and Co. Ltd., London, 1976. L.F. Mondolfo: Aluminum alloys, structure and properties, Butterworths and Co. Ltd., London, 1976.
9.
Zurück zum Zitat J.E. Eklund: Ph.D. Thesis, University of Technology, 1993. J.E. Eklund: Ph.D. Thesis, University of Technology, 1993.
10.
Zurück zum Zitat J.A. Taylor, G.B. Schaffer, and D.H. St John: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1643-1650.CrossRef J.A. Taylor, G.B. Schaffer, and D.H. St John: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1643-1650.CrossRef
11.
Zurück zum Zitat J.L. Jorstad, and W.M. Rasmussen: Aluminum Casting Technology, second ed., Des Plaines, Illinois, USA, 2001, 28-323. J.L. Jorstad, and W.M. Rasmussen: Aluminum Casting Technology, second ed., Des Plaines, Illinois, USA, 2001, 28-323.
12.
Zurück zum Zitat I. Davidson: D.Phil. Thesis, University of Oxford, 2006. I. Davidson: D.Phil. Thesis, University of Oxford, 2006.
13.
Zurück zum Zitat S. Zajac, B. Hutchinson, A. Johansson, and L.O. Gullman: Mater. Sci. Technol., 1994, vol. 10, pp. 323-333. S. Zajac, B. Hutchinson, A. Johansson, and L.O. Gullman: Mater. Sci. Technol., 1994, vol. 10, pp. 323-333.
14.
Zurück zum Zitat European Patent EP 0745694A1, UBE Industries Limited. European Patent EP 0745694A1, UBE Industries Limited.
16.
Zurück zum Zitat ASM Handbook, Volume 15: Casting, ASM International, Metals Park, OH, 1998. ASM Handbook, Volume 15: Casting, ASM International, Metals Park, OH, 1998.
17.
Zurück zum Zitat C.J. Simensen, P. Fartum, A. Andersen, and Z. Fresenius: Anal. Chem., 1984, vol. 319, pp. 286-292.CrossRef C.J. Simensen, P. Fartum, A. Andersen, and Z. Fresenius: Anal. Chem., 1984, vol. 319, pp. 286-292.CrossRef
18.
Zurück zum Zitat S.B. Park, I.C. Stone, and B. Cantor: in Rheocasting of Aluminium Alloys: Solidification of Aluminium Alloys, M.G. Chu, D.A. Granger, and Q Han, eds., TMS, Warrendale, PA, 2004, pp. 257–66. S.B. Park, I.C. Stone, and B. Cantor: in Rheocasting of Aluminium Alloys: Solidification of Aluminium Alloys, M.G. Chu, D.A. Granger, and Q Han, eds., TMS, Warrendale, PA, 2004, pp. 257–66.
19.
20.
Zurück zum Zitat G. Sha: D.Phil. Thesis, University of Oxford, 2001. G. Sha: D.Phil. Thesis, University of Oxford, 2001.
21.
Zurück zum Zitat A. Lui: D.Phil. Thesis, University of Oxford, 2010. A. Lui: D.Phil. Thesis, University of Oxford, 2010.
22.
Zurück zum Zitat M. Jarrett, B. Neilson, and E. Manson-Whitton: in Solidification and Casting, B. Cantor, and K.A.Q. O’Reilly, eds., The Institute of Physics, Bristol, 2003, pp. 3–25. M. Jarrett, B. Neilson, and E. Manson-Whitton: in Solidification and Casting, B. Cantor, and K.A.Q. O’Reilly, eds., The Institute of Physics, Bristol, 2003, pp. 3–25.
23.
Zurück zum Zitat S.B. Park: D.Phil. Thesis, University of Oxford, 2008. S.B. Park: D.Phil. Thesis, University of Oxford, 2008.
24.
Zurück zum Zitat A. Verma, S. Kumar, P.S. Grant, K.A.Q. O’Reilly: J. Alloys Compd., 2013, vol. 555, pp. 274-282.CrossRef A. Verma, S. Kumar, P.S. Grant, K.A.Q. O’Reilly: J. Alloys Compd., 2013, vol. 555, pp. 274-282.CrossRef
25.
Zurück zum Zitat G. Sha, K.A.Q. O’Reilly, B. Cantor, J.M. Titchmarsh, and R.G. Hamerton: Acta Mater., 2003, vol. 51, pp. 1883-1897.CrossRef G. Sha, K.A.Q. O’Reilly, B. Cantor, J.M. Titchmarsh, and R.G. Hamerton: Acta Mater., 2003, vol. 51, pp. 1883-1897.CrossRef
Metadaten
Titel
Influence of Grain-Refiner Addition on the Morphology of Fe-Bearing Intermetallics in a Semi-Solid Processed Al-Mg-Si Alloy
verfasst von
Tahsina Smith
Keyna O’Reilly
Sundaram Kumar
Ian Stone
Publikationsdatum
01.11.2013
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions A / Ausgabe 11/2013
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-013-1934-1

Weitere Artikel der Ausgabe 11/2013

Metallurgical and Materials Transactions A 11/2013 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.