nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

Influence of Heat Index on Tensile Properties and Formability of Friction Stir Dissimilar Welded Blanks

verfasst von : Bhanodaya Kiran Babu Nadikudi

Erschienen in: Emerging Trends in Mechanical Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In friction stir welding process, developed heat is considered as an important factor because it strongly influences the properties of welding. In this study, the effect of heat index on tensile properties and forming behaviour of friction stir welded joints were studied. The influence of grain size on the hardness is also studied. Microhardness and grain size relationship of the welded blanks is expressed in the Hall–Petch equation. It was observed that the mechanical properties and hardness were better at lower rotational speed. An improved formability is achieved at the lower tool rotational speed rather than the high rotational speeds due to refinement of grains occurred at lower heat input.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Development and Fabrication of Smart Waste Segregator

Nächstes Kapitel Convective Heat Transfer on the Optimum Spacing of High Heat Dissipating Heat Sources—A Numerical Approach

Mishra RS, Mahoney MW (2007) Friction stir welding and processing. ASM International, pp 1–5

Hassan AM, Qasim T, Ghaithan A (2012) Effect of pin profile on friction stir welded aluminium matrix composites. Mater Manuf Process 27:1397–1401CrossRef

Govindaraju M, Kandasamy J, Manzoor Hussain M, Prasada Rao K (2012) Some aspects of cross butt friction stir weldments of rare earth magnesium alloys: novel attempts in Friction stir welding. J Appl Sci 12(10):1043–1047CrossRef

Joshi V, Balasubramaniam K, Prakash RV (2011) Optimization of friction stir welding parameters for AA5083 by radiography and ultrasonic technique. In: IEEE international ultrasonic symposium proceedings, pp 1920–1923 (2011)

Mohanty HK, Venkateswarlu D, Mahapatra MM, Kumar P, Mandal NR (2012) Modeling the effects of tool probe geometries and process parameters on friction stirred aluminium welds. J Mech Eng Autom 2(4):74–79

Prado RA, Murr LE, Shindo DJ (2001) Tool wear in the friction stir welding of aluminum alloy 6061+20% AL₂O₃, a preliminary study. Scrip Mater 45:75–80CrossRef

Prado RA, Murr LE, Soto KF (2003) Self optimization in tool wear for friction stir welding of Al 6061+20% AL₂O₃ MMC. Mater Sci Eng A A349:156–165CrossRef

Sato YS, Park SHC, Michiuchi M (2004) Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys. Mater Sci Eng A 50:1233–1236

Palanivel R, Koshy Mathews P (2011) The tensile behaviour of friction-stir welded dissimilar aluminium alloys. Mater Technol 45(6):623–626

10.

Hirata T, Oguri T, Hagino H, Tanaka T, Chung SK, Takigawa Y, Higashi K (2007) Influence of friction stir welding parameters on grain size and formability in 5083 aluminium alloy. Mater Sci Eng A 456:344–349CrossRef

11.

Shukla RK, Shaw PK (2010) Comparative study of friction stir welding and tungsten inert gas welding process. Indian J Sci Technol 3(6):667–671

12.

Chien C-H, Lin W-B, Chen T (2012) Optimal FSW process parameters for aluminium alloys AA5083. Chin Inst Eng 34(1):99–105CrossRef

13.

Xu X, Ynag X, Zhou G, Tan B (2012) The mixing condition and mechanical property on friction stir welded dissimilar formed 3003 and 60601 aluminium alloys. Adv Mater Res 418–420:1346–1350

14.

Subbaiah K, Geetha M, Govindaraju M, Rao SK (2012) Mechanical properties of friction stir welded cast Al-Mg-Sc alloys. Trans Indian Inst Metals 65(2):155–158CrossRef

15.

Vagh AS, Pandya SN (2012) Influence of process parameters on the mechanical properties of FSWed AA2014-T6 alloy using Taguchi orthogonal array. Int J Eng Sci Emerg Technol 2(1):51–58

16.

Palanivel R, Koshy Mathews P, Muragan N (2010) Influences of tool pin profile on the mechanical and metallurgical properties of friction stir welding of dissimilar aluminium alloys. Int J Eng Technol 2(2):109–2115

17.

Aissani M, Gachi S, Boubenider F, Benkedda Y (2010) Design and optimization of friction stir welding tool. Mater Manuf Process 25:1199–1205CrossRef

18.

Moreira PMGP, Santos T, Tavares SMO, Richter-Trummer V, Vilaca P, de Castro PMST (2008) Mechanical characterization of friction stir welds of two dissimilar aluminium alloys of the 6xxx series. Mater Sci Forum 587–588:430–434CrossRef

19.

Leitao C, Emílio B, Chaparro BM, Rodrigues DM (2009) Formability of similar and dissimilar friction stir welded AA 5182-H111 and AA 6016-T4 tailored blanks. Mater Des 30:3235–3242CrossRef

20.

Miles MP, Melton DW, Nelson TW (2005) Formability of friction-stir-welded dissimilar-aluminium-alloy sheets. Metall Mater Trans A 36A:3335–3342CrossRef

21.

Motalleb-Nejad P, Saeid T, Heidarzadeh A, Darzi K, Ashjari M (2014) Effect of tool pin profile on microstructure and mechanical properties of friction stir welded AZ31B magnesium alloy. Mater Des 59:221–226CrossRef

22.

Lee W-B, Kim J-W, Yeon Y-M, Jung S-B (2003) The joint characteristics of friction stir welded AZ91D magnesium alloy. Mater Trans 44(5):917–923CrossRef

23.

Afrin N, Chen DL, Cao X, Jahazi M (2008) Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy. Mater Sci Eng A 472:179–186CrossRef

Titel: Influence of Heat Index on Tensile Properties and Formability of Friction Stir Dissimilar Welded Blanks
verfasst von: Bhanodaya Kiran Babu Nadikudi
Verlag: Springer Singapore
Buch: Emerging Trends in Mechanical Engineering
Print ISBN: 978-981-329-930-6

Electronic ISBN: 978-981-329-931-3

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-981-32-9931-3_7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht