nach oben

International Journal of Mechanics and Materials in Design

Erschienen in:

22.02.2019

Influence of interfacial bonding conditions on the anti-penetration performance of ceramic/metal composite targets

verfasst von: Ruixia Yao, Fei Su, Ronghai Mao

Erschienen in: International Journal of Mechanics and Materials in Design | Ausgabe 4/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This study analyzes the influence of bonded and unbonded interface conditions on the anti-penetration performance of a ceramic/metal composite target and determines the associated mechanism. The 3D finite element and 3D smoothed particle hydrodynamics simulation results revealed that a bonded ceramic/metal target exhibited better anti-penetration performance than an unbonded target, and the associated mechanism was determined. Notably, the bond strength between the ceramic and metal backplate plays an important role in the formation of the ceramic conoid, and the ceramic conoid that formed in the bonded target effectively consumed the kinetic energy of the projectile, thereby improving the anti-penetration performance of ceramic composite armor. To verify this conclusion, we also compare and analyze the anti-penetration performance of interface bonded and unbonded metal/metal composite targets. The results show that due to the absence of the ceramic conoid, the interfacial bonding conditions have little influence on the anti-penetration performance of a metal/metal composite target.

Vorheriger Artikel Semi-active control of ambulance stretcher system based on parallel mechanism with MR dampers and perturbation analysis

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Anderson Jr., C.E., Johnson, G.R., Holmquist, T.J.: Ballistic experiments and computations of confined 99.5% Al₂O₃ ceramic tiles. In: Mayseless, M., Bodner, S.R. (eds.) Proceedings of the 15th International Symposium on Ballistics, vol 2, Jerusalem, Israel, pp. 65–72 (1995)

Cronin, D.S., Bui, K., Kaufmann, C. et al.: Implementation and validation of the Johnson–Holmquist ceramic material model in LS-DYNA. In: Proceedings of the 4th European LS-dyna users conference, vol. 1, pp. 47–60 (2004)

Den Reijer, P.C.: Impact on ceramic faced armour [D]. Delft University of Technology, Delft (1991)

Fellows, N.A., Barton, P.C.: Development of impact model for ceramic-faced semi-infinite armour. Int. J. Impact Eng. 22(8), 793–811 (1999)CrossRef

Florence, A.L., Ahrens, T.J.: Interaction of projectiles and composite armor. Final Report, US Army, pp. 135 Ä(1967)

Grujicic, M., Pandurangan, B., D’Entremont, B.: The role of adhesive in the ballistic/structural performance of ceramic/polymer–matrix composite hybrid armor. Mater. Des. 41, 380–393 (2012)CrossRef

Johnson, G.R., Cook, W.H.: A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th International Symposium on Ballistics, pp. 541–547 (1983)

Johnson, G.R., Holmquist, T.J.: An improved computational constitutive model for brittle materials. High pressure science and technology. AIP, New York (1994)

Johnson, G.R., Holmquist, T.J.: Response of boron carbide subjected to large strains, high strain rates and high pressures. J. Appl. Phys. 85(12), 8060–8073 (1999)CrossRef

Kaufmann, C., Cronin, D., Worswick, M., et al.: Influence of material properties on the ballistic performance of ceramics for personal body armour. Shock Vib. 10(1), 51–58 (2003)CrossRef

Lee, M., Yoo, Y.H.: Analysis of ceramic/metal armour systems. Int. J. Impact Eng. 25(9), 819–829 (2001)CrossRef

López-Puente, J., Arias, A., Zaera, R., et al.: The effect of the thickness of the adhesive layer on the ballistic limit of ceramic/metal armours. An experimental and numerical study. Int. J. Impact Eng. 32(1–4), 321–336 (2005)CrossRef

Madhu, V., Ramanjaneyulu, K., Bhat, T.B.: An experimental study of penetration resistance of ceramic armour subjected to projectile impact. In: International Symposium on Impact Engineering ISIE (2004)

Nemat-Nasser, S.: Phenomenological theories of elastoplasticity and strain localization at high strain rates. Appl. Mech. Rev. 45(3S), S19 (1992)MathSciNetCrossRef

Subramani, K., Vinoth Kanna, I.: Numerical simulation of high velocity impact on composite targets using advanced computational techniques. Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), pp. 399–413. Springer, Singapore (2018)

Tepeduzu, B., Karakuzu, R.: Ballistic performance of ceramic/composite structures. Ceram. Int. 45(2), 1651–1660 (2019)CrossRef

Tian, Chao, An, Xuanyi, Sun, Qitian, Dong, Yongxiang: Experimental and numerical analyses of the penetration resistance of ceramic-metal hybrid structures. Compos. Struct. 211, 264–272 (2019)CrossRef

Übeyli, M., Yıldırım, R.O., Ögel, B.: Investigation on the ballistic behavior of Al(2)O(3)/Al2O24 laminated composites. J. Mater. Process. Technol. 196(1–3), 356–364 (2008)CrossRef

Woodward, R.L.: A simple one-dimensional approach to modelling ceramic composite armour defeat. Int. J. Impact Eng. 9(4), 455–474 (1990)CrossRef

Yi, R.C., Yin, L.K., Wang, J.R., et al.: Study on the performance of ceramic composite projectile penetrating into ceramic composite target. Def. Technol. 13, 299 (2017)

Zaera, R., Sánchez-Gálvez, V.: Analytical modelling of normal and oblique ballistic impact on ceramic/metal lightweight armours. Int. J. Impact Eng. 21(3), 133–148 (1998)CrossRef

Titel: Influence of interfacial bonding conditions on the anti-penetration performance of ceramic/metal composite targets
verfasst von: Ruixia Yao
Fei Su
Ronghai Mao
Publikationsdatum: 22.02.2019
Verlag: Springer Netherlands
Erschienen in: International Journal of Mechanics and Materials in Design / Ausgabe 4/2019
Print ISSN: 1569-1713
Elektronische ISSN: 1573-8841
DOI: https://doi.org/10.1007/s10999-019-09445-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2019

Micromechanical modeling of particulate-filled composites using micro-CT to create representative volume elements

Benchmark analysis of piezoelectric bimorph energy harvesters composed of laminated composite beam substrates

Post-buckling optimization of two-dimensional functionally graded porous beams

Novel method for analyzing the behavior of composite beams with non-smooth interfaces

Dispersion of Love waves in size-dependent substrate containing finite piezoelectric and viscoelastic layers

Stability analysis of a capacitive micro-resonator with embedded pre-strained SMA wires

Premium Partner

Marktübersichten