Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 7/2016

07.06.2016

Influence of Laser Peening on Phase Transformation and Corrosion Resistance of AISI 321 steel

verfasst von: D. Karthik, S. Swaroop

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 7/2016

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The objective of this study is to investigate the influence of laser peening without coating (LPwC) on austenitic to martensitic (γ → α′) phase transformation and corrosion behavior of austenitic stainless steel AISI 321 in 3.5% NaCl environment. Results indicate that LPwC induces a large compressive residual stresses of nearly −854 MPa and γ → α′ phase transformation of about 18% (volume fraction). Microstructures of peened surface confirmed the γ → α′ phase transformation and showed no grain refinement. Hardness increased slightly with a case depth of 900 μm. Despite the smaller surface roughness introduced, corrosion resistance improved after peening due to compressive residual stresses.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat M.J.G. Silva, A.A. Souza, A.V.C. Sobral, P. De Lima-Neto, and H.F.G. Abreu, Microstructural and Electrochemical Characterization of the Low Temperature Sensitization of AISI, 321 Stainless Steel Tube used in Petroleum Refining Plants, J. Mater. Sci., 2003, 38, p 1007–1011CrossRef M.J.G. Silva, A.A. Souza, A.V.C. Sobral, P. De Lima-Neto, and H.F.G. Abreu, Microstructural and Electrochemical Characterization of the Low Temperature Sensitization of AISI, 321 Stainless Steel Tube used in Petroleum Refining Plants, J. Mater. Sci., 2003, 38, p 1007–1011CrossRef
2.
Zurück zum Zitat B.A. Gurovich, E.A. Kuleshova, A.S. Frolov, D.A. Maltsev, K.E. Prikhodko, S.V. Fedotova, B.Z. Margolin, and A.A. Sorokin, Investigation of High Temperature Annealing Effectiveness for Recovery of Radiation-Induced Structural Changes and Properties of 18Cr-10Ni-Ti Austenitic Stainless Steels, J. Nucl. Mater., 2015, 465, p 565–581CrossRef B.A. Gurovich, E.A. Kuleshova, A.S. Frolov, D.A. Maltsev, K.E. Prikhodko, S.V. Fedotova, B.Z. Margolin, and A.A. Sorokin, Investigation of High Temperature Annealing Effectiveness for Recovery of Radiation-Induced Structural Changes and Properties of 18Cr-10Ni-Ti Austenitic Stainless Steels, J. Nucl. Mater., 2015, 465, p 565–581CrossRef
3.
Zurück zum Zitat Y.Y. Chen, Y.M. Liou, and H.C. Shih, Stress Corrosion Cracking of Type 321 Stainless Steels in Simulated Petrochemical Process Environments Containing Hydrogen Sulfide and Chloride, Mater. Sci. Eng. A., 2005, 407, p 114–126CrossRef Y.Y. Chen, Y.M. Liou, and H.C. Shih, Stress Corrosion Cracking of Type 321 Stainless Steels in Simulated Petrochemical Process Environments Containing Hydrogen Sulfide and Chloride, Mater. Sci. Eng. A., 2005, 407, p 114–126CrossRef
4.
Zurück zum Zitat Y. Haung, Stress Corrosion Cracking of AISI, 321 Stainless Steel in Acidic Chloride Solution, Bull. Mater. Sci., 2002, 25, p 47–51CrossRef Y. Haung, Stress Corrosion Cracking of AISI, 321 Stainless Steel in Acidic Chloride Solution, Bull. Mater. Sci., 2002, 25, p 47–51CrossRef
5.
Zurück zum Zitat L. Jinlong and L. Hongyun, Comparison of Corrosion Properties of Passive Films Formed on Phase Reversion Induced Nano/Ultrafine-Grained 321 Stainless Steel, Appl. Surf. Sci., 2013, 280, p 124–131CrossRef L. Jinlong and L. Hongyun, Comparison of Corrosion Properties of Passive Films Formed on Phase Reversion Induced Nano/Ultrafine-Grained 321 Stainless Steel, Appl. Surf. Sci., 2013, 280, p 124–131CrossRef
6.
Zurück zum Zitat T. Wang, J. Yu, and B. Dong, Surface Nanocrystallization Induced by Shot Peening and Its Effect on Corrosion Resistance of 1Cr18Ni9Ti Stainless Steel, Surf. Coat. Technol., 2006, 200, p 4777–4781CrossRef T. Wang, J. Yu, and B. Dong, Surface Nanocrystallization Induced by Shot Peening and Its Effect on Corrosion Resistance of 1Cr18Ni9Ti Stainless Steel, Surf. Coat. Technol., 2006, 200, p 4777–4781CrossRef
7.
Zurück zum Zitat G.Z. Ma, B.S. Xu, H.D. Wang, H.J. Si, and D.X. Yang, Effect of Surface Nanocrystallization on the Tribological Properties of 1Cr18Ni9Ti Stainless Steel, Mater. Lett., 2011, 65, p 1268–1271CrossRef G.Z. Ma, B.S. Xu, H.D. Wang, H.J. Si, and D.X. Yang, Effect of Surface Nanocrystallization on the Tribological Properties of 1Cr18Ni9Ti Stainless Steel, Mater. Lett., 2011, 65, p 1268–1271CrossRef
8.
Zurück zum Zitat G.Z. Ma, B.S. Xu, H.D. Wang, and H.J. Si, Effects of Surface Nanocrystallization Pretreatment on Low-Temperature Ion Sulfurization Behavior of 1Cr18Ni9Ti Stainless Steel, Appl. Surf. Sci., 2010, 257, p 1204–1210CrossRef G.Z. Ma, B.S. Xu, H.D. Wang, and H.J. Si, Effects of Surface Nanocrystallization Pretreatment on Low-Temperature Ion Sulfurization Behavior of 1Cr18Ni9Ti Stainless Steel, Appl. Surf. Sci., 2010, 257, p 1204–1210CrossRef
9.
Zurück zum Zitat B.N. Mordyuk, G.I. Prokopenko, M.A. Vasylyev, and M.O. Iefimov, Effect of Structure Evolution Induced by Ultrasonic Peening on the Corrosion Behavior of AISI-321 Stainless Steel, Mater. Sci. Eng. A., 2007, 458, p 253–261CrossRef B.N. Mordyuk, G.I. Prokopenko, M.A. Vasylyev, and M.O. Iefimov, Effect of Structure Evolution Induced by Ultrasonic Peening on the Corrosion Behavior of AISI-321 Stainless Steel, Mater. Sci. Eng. A., 2007, 458, p 253–261CrossRef
10.
Zurück zum Zitat B.N. Mordyuk, Y.V. Milman, M.O. Iefimov, G.I. Prokopenko, V.V. Silberschmidt, M.I. Danylenko, and A.V. Kotko, Characterization of Ultrasonically Peened and Laser-Shock Peened Surface Layers of AISI, 321 Stainless Steel, Surf. Coat. Technol., 2008, 202, p 4875–4883CrossRef B.N. Mordyuk, Y.V. Milman, M.O. Iefimov, G.I. Prokopenko, V.V. Silberschmidt, M.I. Danylenko, and A.V. Kotko, Characterization of Ultrasonically Peened and Laser-Shock Peened Surface Layers of AISI, 321 Stainless Steel, Surf. Coat. Technol., 2008, 202, p 4875–4883CrossRef
11.
Zurück zum Zitat C.S. Montross, T. Wei, L. Ye, G. Clark, and Y. Mai, Laser Shock Processing and Its Effects on Microstructure and Properties of Metal Alloys: A Review, Int. J. Fatigue, 2006, 24, p 1021–1036CrossRef C.S. Montross, T. Wei, L. Ye, G. Clark, and Y. Mai, Laser Shock Processing and Its Effects on Microstructure and Properties of Metal Alloys: A Review, Int. J. Fatigue, 2006, 24, p 1021–1036CrossRef
12.
Zurück zum Zitat P. Peyre, X. Scherpereel, L. Berthe, C. Carboni, R. Fabbro, G. Béranger, and C. Leimatre, Surface Modifications Induced in 316L Steel by Laser Peening and Shot-Peening. Influence on Pitting Corrosion Resistance, Mater. Sci. Eng. A., 2000, 280, p 294–302CrossRef P. Peyre, X. Scherpereel, L. Berthe, C. Carboni, R. Fabbro, G. Béranger, and C. Leimatre, Surface Modifications Induced in 316L Steel by Laser Peening and Shot-Peening. Influence on Pitting Corrosion Resistance, Mater. Sci. Eng. A., 2000, 280, p 294–302CrossRef
13.
Zurück zum Zitat P. Peyre, L. Berthe, V. Vignal, I. Popa, and T. Baudin, Analysis of Laser Shock Waves and Resulting Surface Deformations in an Al-Cu-Li Aluminum Alloy, J. Phys. D, 2012, 45, p 335304CrossRef P. Peyre, L. Berthe, V. Vignal, I. Popa, and T. Baudin, Analysis of Laser Shock Waves and Resulting Surface Deformations in an Al-Cu-Li Aluminum Alloy, J. Phys. D, 2012, 45, p 335304CrossRef
14.
Zurück zum Zitat L. Berthe, R. Fabbro, P. Peyre, L. Tollier, and E. Bartnicki, Shock Waves from a Water-Confined Laser-Generated Plasma, J. Appl. Phys., 1997, 82, p 2826–2832CrossRef L. Berthe, R. Fabbro, P. Peyre, L. Tollier, and E. Bartnicki, Shock Waves from a Water-Confined Laser-Generated Plasma, J. Appl. Phys., 1997, 82, p 2826–2832CrossRef
15.
Zurück zum Zitat S. Sathyajith and S. Kalainathan, Effect of Laser Shot Peening on Precipitation Hardened Aluminum Alloy 6061-T6 Using Low Energy Laser, Opt. Lasers Eng., 2012, 50, p 345–348CrossRef S. Sathyajith and S. Kalainathan, Effect of Laser Shot Peening on Precipitation Hardened Aluminum Alloy 6061-T6 Using Low Energy Laser, Opt. Lasers Eng., 2012, 50, p 345–348CrossRef
16.
Zurück zum Zitat N. Mukai, N. Aoki, M. Obata, A. Ito, Y. Sano, and C. Konagai, Laser processing for underwater maintenance in nuclear plants, ICONE-3: Proceedings of the 3rd JSME/ASME joint international conference on nuclear engineering, April 23–27 (Kyoto, Japan), Japan Society of Mechanical Engineers, 1995 N. Mukai, N. Aoki, M. Obata, A. Ito, Y. Sano, and C. Konagai, Laser processing for underwater maintenance in nuclear plants, ICONE-3: Proceedings of the 3rd JSME/ASME joint international conference on nuclear engineering, April 23–27 (Kyoto, Japan), Japan Society of Mechanical Engineers, 1995
17.
Zurück zum Zitat Y. Sano, K. Akita, K. Masaki, Y. Ochi, I. Altenberger, and B. Scholtes, Laser Peening Without Coating as a Surface Enhancement Technology, J. Laser Micro Nanoeng., 2006, 1, p 161–166CrossRef Y. Sano, K. Akita, K. Masaki, Y. Ochi, I. Altenberger, and B. Scholtes, Laser Peening Without Coating as a Surface Enhancement Technology, J. Laser Micro Nanoeng., 2006, 1, p 161–166CrossRef
18.
Zurück zum Zitat Y. Sano, K. Masaki, T. Gushi, and T. Sano, Improvement in Fatigue Performance of Friction Stir Welded A6061-T6 Aluminum Alloy by Laser Peening Without Coating, Mater. Des., 2012, 36, p 809–814CrossRef Y. Sano, K. Masaki, T. Gushi, and T. Sano, Improvement in Fatigue Performance of Friction Stir Welded A6061-T6 Aluminum Alloy by Laser Peening Without Coating, Mater. Des., 2012, 36, p 809–814CrossRef
19.
Zurück zum Zitat Y.B. Guo and R. Caslaru, Fabrication and Characterization of Micro Dent Arrays Produced by Laser Shock Peening on Titanium Ti–6Al–4 V surfaces, J. Mater. Process. Technol., 2011, 211, p 729–736CrossRef Y.B. Guo and R. Caslaru, Fabrication and Characterization of Micro Dent Arrays Produced by Laser Shock Peening on Titanium Ti–6Al–4 V surfaces, J. Mater. Process. Technol., 2011, 211, p 729–736CrossRef
20.
Zurück zum Zitat U. Trdan, M. Skarba, and J. Grum, Laser Shock Peening Effect on the Dislocation Transitions and Grain Refinement of Al–Mg–Si Alloy, Mater. Charact., 2014, 97, p 57–68CrossRef U. Trdan, M. Skarba, and J. Grum, Laser Shock Peening Effect on the Dislocation Transitions and Grain Refinement of Al–Mg–Si Alloy, Mater. Charact., 2014, 97, p 57–68CrossRef
21.
Zurück zum Zitat H. Lim, P. Kim, H. Jeong, and S. Jeong, Enhancement of Abrasion and Corrosion Resistance of Duplex Stainless Steel by Laser Shock Peening, J. Mater. Process. Technol., 2012, 212, p 1347–1354CrossRef H. Lim, P. Kim, H. Jeong, and S. Jeong, Enhancement of Abrasion and Corrosion Resistance of Duplex Stainless Steel by Laser Shock Peening, J. Mater. Process. Technol., 2012, 212, p 1347–1354CrossRef
22.
Zurück zum Zitat U. Trdan and J. Grum, SEM/EDS Characterization of Laser Shock Peening Effect on Localized Corrosion of Al Alloy in a Near Natural Chloride Environment, Corros. Sci., 2014, 82, p 328–338CrossRef U. Trdan and J. Grum, SEM/EDS Characterization of Laser Shock Peening Effect on Localized Corrosion of Al Alloy in a Near Natural Chloride Environment, Corros. Sci., 2014, 82, p 328–338CrossRef
23.
Zurück zum Zitat S. Kalainathan, S. Sathyajith, and S. Swaroop, Effect of Laser Shot Peening Without Coating on the Surface Properties and Corrosion Behavior of 316L Steel, Opt. Lasers Eng., 2012, 50, p 1740–1745CrossRef S. Kalainathan, S. Sathyajith, and S. Swaroop, Effect of Laser Shot Peening Without Coating on the Surface Properties and Corrosion Behavior of 316L Steel, Opt. Lasers Eng., 2012, 50, p 1740–1745CrossRef
24.
Zurück zum Zitat C. Ye, S. Suslov, D. Lin, and G.J. Cheng, Deformation-Induced Martensite and Nanotwins by Cryogenic Laser Shock Peening of AISI, 304 Stainless Steel and the Effects on Mechanical Properties, Philos. Magn., 2012, 92, p 1369–1389CrossRef C. Ye, S. Suslov, D. Lin, and G.J. Cheng, Deformation-Induced Martensite and Nanotwins by Cryogenic Laser Shock Peening of AISI, 304 Stainless Steel and the Effects on Mechanical Properties, Philos. Magn., 2012, 92, p 1369–1389CrossRef
25.
Zurück zum Zitat M. Gerland and M. Hallouin, Effect of Pressure on the Microstructure of an Austenitic Stainless Steel Shock-Loaded by Very Short Laser Pulses, J. Mater. Sci., 1994, 29, p 345–351CrossRef M. Gerland and M. Hallouin, Effect of Pressure on the Microstructure of an Austenitic Stainless Steel Shock-Loaded by Very Short Laser Pulses, J. Mater. Sci., 1994, 29, p 345–351CrossRef
26.
Zurück zum Zitat M. Turski, S. Clitheroe, A.D. Evans, C. Rodopoulos, D.J. Hughes, and P.J. Withers, Engineering the Residual Stress State and Microstructure of Stainless Steel with Mechanical Surface Treatments, Appl. Phys. A, 2010, 99, p 549–556CrossRef M. Turski, S. Clitheroe, A.D. Evans, C. Rodopoulos, D.J. Hughes, and P.J. Withers, Engineering the Residual Stress State and Microstructure of Stainless Steel with Mechanical Surface Treatments, Appl. Phys. A, 2010, 99, p 549–556CrossRef
27.
Zurück zum Zitat D. Karthik, S. Kalainathan, and S. Swaroop, Surface Modification of 17-4 PH Stainless Steel by Laser Peening Without Protective Coating Process, Surf. Coat. Technol., 2015, 278, p 138–145CrossRef D. Karthik, S. Kalainathan, and S. Swaroop, Surface Modification of 17-4 PH Stainless Steel by Laser Peening Without Protective Coating Process, Surf. Coat. Technol., 2015, 278, p 138–145CrossRef
28.
Zurück zum Zitat A.S. Gill, A. Telang, and V.K. Vasudevan, Characteristics of Surface Layers Formed on Inconel 718 by Laser Shock Peening with and Without a Protective Coating, J. Mater. Process. Technol., 2015, 225, p 463–472CrossRef A.S. Gill, A. Telang, and V.K. Vasudevan, Characteristics of Surface Layers Formed on Inconel 718 by Laser Shock Peening with and Without a Protective Coating, J. Mater. Process. Technol., 2015, 225, p 463–472CrossRef
29.
Zurück zum Zitat A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock, Quantitative Measurement of Deformation-Induced Martensite in 304 Stainless Steel by x-ray Diffraction, Scr. Mater., 2004, 50, p 1445–1449CrossRef A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock, Quantitative Measurement of Deformation-Induced Martensite in 304 Stainless Steel by x-ray Diffraction, Scr. Mater., 2004, 50, p 1445–1449CrossRef
30.
Zurück zum Zitat E. Nagy, V. Mertinger, F. Tranta, and J. Sólyom, Deformation Induced Martensitic Transformation in Stainless Steels, Mater. Sci. Eng. A, 2004, 378, p 308–313CrossRef E. Nagy, V. Mertinger, F. Tranta, and J. Sólyom, Deformation Induced Martensitic Transformation in Stainless Steels, Mater. Sci. Eng. A, 2004, 378, p 308–313CrossRef
31.
Zurück zum Zitat U. Trdan, J.A. Porro, J.L. Ocaña, and J. Grum, Laser Shock Peening Without Absorbent Coating (LSPwC) Effect on 3D Surface Topography and Mechanical Properties of 6082-T651 Al alloy, Surf. Coat. Technol., 2012, 208, p 109–116CrossRef U. Trdan, J.A. Porro, J.L. Ocaña, and J. Grum, Laser Shock Peening Without Absorbent Coating (LSPwC) Effect on 3D Surface Topography and Mechanical Properties of 6082-T651 Al alloy, Surf. Coat. Technol., 2012, 208, p 109–116CrossRef
32.
Zurück zum Zitat S. Sathyajith, S. Kalainathan, and S. Swaroop, Laser Peening Without Coating on Aluminum Alloy Al-6061-T6 Using Low Energy Nd:YAG Laser, Opt. Laser Technol., 2013, 45, p 389–394CrossRef S. Sathyajith, S. Kalainathan, and S. Swaroop, Laser Peening Without Coating on Aluminum Alloy Al-6061-T6 Using Low Energy Nd:YAG Laser, Opt. Laser Technol., 2013, 45, p 389–394CrossRef
33.
Zurück zum Zitat J.Z. Lu, K.Y. Luo, Y.K. Zhang, C.Y. Cui, G.F. Sun, J.Z. Zhou, L. Zhang, J. You, K.M. Chen, and J.W. Zhong, Grain Refinement of LY2 Aluminum Alloy Induced by Ultra-high Plastic Strain During Multiple Laser Shock Processing Impacts, Acta Mater., 2010, 58, p 3984–3994CrossRef J.Z. Lu, K.Y. Luo, Y.K. Zhang, C.Y. Cui, G.F. Sun, J.Z. Zhou, L. Zhang, J. You, K.M. Chen, and J.W. Zhong, Grain Refinement of LY2 Aluminum Alloy Induced by Ultra-high Plastic Strain During Multiple Laser Shock Processing Impacts, Acta Mater., 2010, 58, p 3984–3994CrossRef
34.
Zurück zum Zitat A. Telang, C. Ye, A. Gill, S. Teysseyre, S.R. Mannava, D. Qian, and V.K. Vasudevan, Effects of Laser Shock Peening on SCC Behavior of Alloy 600, Corros. Sci., 2015, 90, p 434–444CrossRef A. Telang, C. Ye, A. Gill, S. Teysseyre, S.R. Mannava, D. Qian, and V.K. Vasudevan, Effects of Laser Shock Peening on SCC Behavior of Alloy 600, Corros. Sci., 2015, 90, p 434–444CrossRef
35.
Zurück zum Zitat M. Ridlova, L. Hyspecka, F. Wenger, P. Ponthiaux, J. Galland, and P. Kubecka, Strain-Induced Martensitic Transformation in type 321 Austenitic Stainless Steel, J. Phys. IV, 2003, 112, p 429–432 M. Ridlova, L. Hyspecka, F. Wenger, P. Ponthiaux, J. Galland, and P. Kubecka, Strain-Induced Martensitic Transformation in type 321 Austenitic Stainless Steel, J. Phys. IV, 2003, 112, p 429–432
36.
Zurück zum Zitat S.M. Lee, W.G. Lee, Y.H. Kim, and H. Jang, Surface Roughness and the Corrosion Resistance of 21Cr Ferritic Stainless Steel, Corros. Sci., 2012, 63, p 404–409CrossRef S.M. Lee, W.G. Lee, Y.H. Kim, and H. Jang, Surface Roughness and the Corrosion Resistance of 21Cr Ferritic Stainless Steel, Corros. Sci., 2012, 63, p 404–409CrossRef
37.
Zurück zum Zitat U. Trdan and J. Grum, Evaluation of Corrosion Resistance of AA6082-T651 Aluminium Alloy After Laser Shock Peening by Means of Cyclic Polarisation and ElS Methods, Corros. Sci., 2012, 59, p 324–333CrossRef U. Trdan and J. Grum, Evaluation of Corrosion Resistance of AA6082-T651 Aluminium Alloy After Laser Shock Peening by Means of Cyclic Polarisation and ElS Methods, Corros. Sci., 2012, 59, p 324–333CrossRef
38.
Zurück zum Zitat H. Lee, D. Kim, J. Jung, Y. Pyoun, and K. Shin, Influence of Peening on the Corrosion Properties of AISI, 304 Stainless Steel, Corros. Sci., 2009, 51, p 2826–2830CrossRef H. Lee, D. Kim, J. Jung, Y. Pyoun, and K. Shin, Influence of Peening on the Corrosion Properties of AISI, 304 Stainless Steel, Corros. Sci., 2009, 51, p 2826–2830CrossRef
39.
Zurück zum Zitat T. Balusamy, T.S.N. Sankara Narayanan, K. Ravichandran, I.S. Park, and M.H. Lee, Influence of Surface Mechanical Attrition Treatment (SMAT) on the Corrosion Behaviour of AISI, 304 Stainless Steel, Corros. Sci., 2013, 74, p 332–344CrossRef T. Balusamy, T.S.N. Sankara Narayanan, K. Ravichandran, I.S. Park, and M.H. Lee, Influence of Surface Mechanical Attrition Treatment (SMAT) on the Corrosion Behaviour of AISI, 304 Stainless Steel, Corros. Sci., 2013, 74, p 332–344CrossRef
40.
Zurück zum Zitat A. Barbucci, M. Delucchi, M. Panizza, M. Sacco, and G. Cerisola, Electrochemical and Corrosion Behaviour of Cold Rolled AISI, 301 in 1 M H2SO4, J. Alloys. Compd., 2001, 317, p 607–611CrossRef A. Barbucci, M. Delucchi, M. Panizza, M. Sacco, and G. Cerisola, Electrochemical and Corrosion Behaviour of Cold Rolled AISI, 301 in 1 M H2SO4, J. Alloys. Compd., 2001, 317, p 607–611CrossRef
41.
Zurück zum Zitat H. Kamkarrad, S. Narayanswamy, and M. Keshmiri, High Repetition Laser Shock Peening on Magnesium Based Biodegradable Alloys, J. Laser Micro Nanoeng., 2015, 10, p 291–297CrossRef H. Kamkarrad, S. Narayanswamy, and M. Keshmiri, High Repetition Laser Shock Peening on Magnesium Based Biodegradable Alloys, J. Laser Micro Nanoeng., 2015, 10, p 291–297CrossRef
42.
Zurück zum Zitat D. Karthik and S. Swaroop, Laser Peening Without Coating Induced Phase Transformation and Thermal Relaxation of Residual Stresses in AISI, 321 Steel, Surf. Coat. Technol., 2016, 291, p 161–171CrossRef D. Karthik and S. Swaroop, Laser Peening Without Coating Induced Phase Transformation and Thermal Relaxation of Residual Stresses in AISI, 321 Steel, Surf. Coat. Technol., 2016, 291, p 161–171CrossRef
43.
Zurück zum Zitat O. Takakuwa and H. Soyama, Effect of Residual Stress on the Corrosion Behavior of Austenitic Stainless Steel, Adv. Chem. Eng. Sci., 2015, 5, p 62–71CrossRef O. Takakuwa and H. Soyama, Effect of Residual Stress on the Corrosion Behavior of Austenitic Stainless Steel, Adv. Chem. Eng. Sci., 2015, 5, p 62–71CrossRef
44.
Zurück zum Zitat X. Liu and G.S. Frankel, Effects of Compressive Stress on Localized Corrosion in AA2024-T3, Corros. Sci., 2006, 48, p 3309–3329CrossRef X. Liu and G.S. Frankel, Effects of Compressive Stress on Localized Corrosion in AA2024-T3, Corros. Sci., 2006, 48, p 3309–3329CrossRef
Metadaten
Titel
Influence of Laser Peening on Phase Transformation and Corrosion Resistance of AISI 321 steel
verfasst von
D. Karthik
S. Swaroop
Publikationsdatum
07.06.2016
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 7/2016
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-016-2158-5

Weitere Artikel der Ausgabe 7/2016

Journal of Materials Engineering and Performance 7/2016 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.