nach oben

Metallurgist

Erschienen in:

25.02.2023

Influence of Manufacturing Parameters on Pseudo-β-Titanium Alloy VT47 Sheet Structural State and Mechanical Property Anisotropy

verfasst von: N. A. Nochovnaya, A. A. Shiryaev, E. A. Davydova

Erschienen in: Metallurgist | Ausgabe 9-10/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The influence thermomechanical treatment processing parameters on mechanical properties of metastable β -titanium alloy VT47 hot rolled sheets is investigated. It is shown that the alloy is effectively hardened by low-temperature thermomechanical treatment (LTMT) after cold rolling with plastic deformation from 15 to 65% and subsequent ageing at different temperatures. Cold rolling with plastic deformation up to 25% allows for moderate mechanical property anisotropy after ageing. LTMT leads to formation of a homogeneous mixture of very finely dispersed secondary α -phase precipitates, which are fairly uniformly distributed within an initial β -grain. Based on analysis results for a set of factors (workability, the level of mechanical properties, microstructure) LTMT regimes are selected for subsequent research providing a good set of mechanical properties.

Vorheriger Artikel Research for Replacement of Gray Cast Irons for Manufacturing Electrolyzer Gas Collection Bell Cast Components

Nächster Artikel Effect of Thermal Deformation Treatment Regimes on Al–4.5Zn–4.5Mg–1Cu–0.12Zr–0.1Sc Alloy Structure and Properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

R. P. Kolli and A. Devaraj, “A review of metastable beta titanium alloys,” Metals, 8, 1–41 (2018).CrossRef

R. Boyer, “Aerospace applications of beta titanium alloys,” JOM, No. 6, 20–23 (1994).CrossRef

V. N. Moiseev, “β -titanium alloys and prospects for their development,” MiTOM, No. 12, 11-14 (1998).

P. V. Panin, N. A. Nochovnaya, D. E. Kablov, E. B. Alekseev, A. A. Shiryaev, and A. V. Novak, Practical Handbook for Metallography of Alloys Based on Titanium and its Intermetallics: Teaching Aid [in Russian], E. N. Kablov (editor), VIAM, Moscow (2020).

J. Ferrero, A. Hutt, and S. Sweet, “Properties comparison for various beta and alpha-beta alloys,” in: Proc. of 10th World Conference on Titanium “Ti-2003 Science and Technology”, Wiley–VCH, Germany (2004), pp. 385–392.

O. M. Ivasishin, P. E. Markovsky, Y. V. Matviychuk, S. L. Semiatin, C .H. Ward, and S. Fox, “A comparative study of the mechanical properties of high-strength β -titanium alloys,” J. Alloys and Compounds, 457, 296–309 (2008).CrossRef

V. V. Antipov, “Prospects fro developing aluminum, magnesium, and titanium alloys for aerospace engineering objects,” Aviats. Mater. Tekhnol., No. S, 186–194 (2017); DOI: https://doi.org/10.18577/2071-9140-2017-0-S-186-194.

D. A. Dzunovich, E. B. Alekseev, P. V. Panin, E. A. Lukina, and A. V. Novak, “Structure and properties of sheet semifinished products from wrought intermetallic titanium alloys of different classes,” Aviats. Mater. Tekhnol., No. 2(51), 17–25 (2018); DOI: https://doi.org/10.18577/2071-91402018-0-2-17-25.

E. N. Kablov, “Marketing of materials science, aircraft building and industry: current and future,” Direktor po Marketingu Sbytu, No. 5-6, 40–44 |(2017).

10.

RF Patent 2569285, 2014153690/02. High-Strength Alloy Based on Titanium, and Object Made from High-Strength Alloy Based on Titanium, Claim 29.12.2014; Publ. 20.11.2015; Bull. No. 32.

11.

E. N. Kablov, N. A. Nochovnaya, A. A. Shiryaev, and E. A. Davydova, “Study of structure and phase transformation in β-titanium alloys and effect of cooling rate from the homogenizing temperature on alloy VT47 structure and properties. Part 1,” Trudy VIAM Élektron. Nauch.-Tekhn. Zh., No. 6-7, Art. 01 (2020); URL: http://www.viam-works.ru (referral date 02.06.2021); DOI: https://doi.org/10.18577/2307-6046-2020-0-67-3-10.

12.

N. Kablov, N. A. Nochovnaya, A. A. Shiryaev, and E. A. Davydova, “Study of structure and phase transformation in β -titanium alloys and effect of cooling rate from the homogenizing temperature on alloy VT47 structure and properties. Part 2,” Trudy VIAM Élektron. Nauch.-Tekhn. Zh., No. 6-7, Art. 01 (2020); URL: http://www.viam-works.ru (referral date 02.06.2021); DOI: https://doi.org/10.18577/2307-6046-2020-0-8-11-19.

13.

PI 1.2A.550-2000, “Vacuum heat treatment of components and assembled units made from wrought titanium alloys”.

14.

A. I. Khorev, “Thermomechanical treatment and textural strengthening of weldable titanium alloys,” Svaroch. Proizvod., No. 10, 11020 (2012).

15.

R. R. Boyer, H. J. Rack, and V. Venkatesh, “The influence of thermomechanical processing on the smooth fatigue properties of Ti–15V–3Cr–3Al–3Sn,” Materials Science and Engineering, A243, 97–102 (1998).CrossRef

16.

A. A. Shiryaev, Effect of Rare Earth Elements and Thermomechanical Treatment Parameters on the Structure, Phase Composition, and Mechanical Properties of Sheet Semi-Products of High-Strength Pseudo-β -Titanium Alloy, Diss. Cand. Techn. Sci., Moscow (2019).

Titel: Influence of Manufacturing Parameters on Pseudo-β-Titanium Alloy VT47 Sheet Structural State and Mechanical Property Anisotropy
verfasst von: N. A. Nochovnaya
A. A. Shiryaev
E. A. Davydova
Publikationsdatum: 25.02.2023
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 9-10/2023
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-023-01434-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-10/2023

Research for Replacement of Gray Cast Irons for Manufacturing Electrolyzer Gas Collection Bell Cast Components

Thermal Design of CCM Mold with Slotted Water Cooling Channels

Experimental Mold for Producing Concast Billets from High-Alloyed Steels and Alloys. Part 1. Preliminary Thermal Testing and Design of the Mold

Study and Prediction of Plasticization of Hot-Rolled Steel Strip During Straightening Under Conditions of Alternating Deformation

Effect of Rapid Processes During Phase Transformation on Steel and Alloy Structural Changes and Properties

Structure and Properties of Steel for Producing Hydrogen Sulfide Resistant Oil and Gas High Strength Pipes

Premium Partner

Marktübersichten