nach oben

Production Engineering

Erschienen in:

10.08.2018 | Production Process

Influence of punch sequence and prediction of wrinkling in textile forming with a multi-punch tool

verfasst von: Sven Coutandin, David Brandt, Paul Heinemann, Paul Ruhland, Jürgen Fleischer

Erschienen in: Production Engineering | Ausgabe 6/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Liquid composite moulding (LCM) processes show a high potential in automated, large scale production of continuous fibre-reinforced plastics (FRP). One of the most challenging steps is the forming of the two-dimensional textile material into a complex, three-dimensional fibre structure. In this paper, a multi-punch forming process is presented. The upper mould of a generic part geometry is divided into 15 independently controllable punches. Depending on the different punch sequences, draping effects as well as defects related to wrinkling and shearing of the textile material are investigated. It has been shown that the sequence of the punches has a significant influence on the final preform quality. To predict the resulting regions of wrinkling and shearing, a finite-element based simulation model is set up. Forming tests and simulations with different punch-sequences are then performed and evaluated for validation purposes. To make a statement about the global preform quality, different objective functions regarding wrinkling are presented and analysed.

Vorheriger Artikel Improvement of deep drawing conditions utilizing LDPE/Gr/MWCNT composite films

Nächster Artikel Surface pre-treatment and its influence on electric functionality and the formability of screen printed steel sheet

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Goede M, Stehlin M, Rafflenbeul L et al (2009) Super light car—lightweight construction thanks to a multi-material design and function integration. Eur Transp Res Rev 1(1):5–10. https://doi.org/10.1007/s12544-008-0001-2 CrossRef

Marsh G (2004) Can composites get firmly on the rails? Reinf Plast 48(7):26–30. https://doi.org/10.1016/S0034-3617(04)00373-X CrossRef

Fleischer J, Lanza G, Brabandt D, Wagner H (2012) Overcoming the challenges of automated preforming of semi-finished textiles. In: Symposium on automation of advanced composites and its technology, München, pp 114–143

Hufenbach W (ed) (2007) Textile Verbundbauweisen und Fertigungstechnologien für Leichtbaustrukturen des Maschinen- und Fahrzeugbaus: SPP 1123. Progressmedia, Dresden

Neitzel M (ed) (2014) Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung, 2. Aufl. Hanser, München

Angerer A, Ehinger C, Hoffmann A, Reif W, Reinhart G (2011) Design of an automation system for preforming processes in aerospace industries. In: IEEE international conference on automation science and engineering, pp 557–562. https://doi.org/10.1109/CASE.2011.6042411

Bhattacharyya D (1997) Composite sheet forming. Elsevier, Burlington

Grieser T, Rieber G, Mitschang P (2012) Production of continuously formed high performance preforms for FRPC profiles. In: ECCM 2012—Composites at Venice, Proceedings of the 15th European conference on composite materials

Förster F, Ballier F, Coutandin S et al (2017) Manufacturing of textile preforms with an intelligent draping and gripping system. Procedia CIRP 66:39–44. https://doi.org/10.1016/j.procir.2017.03.370 CrossRef

10.

Kordi MT, Hüsing M, Corves B (2007) Development of a multifunctional robot end-effector system for automated manufacture of textile preforms. In: IEEE/ASME international conference on advanced intelligent mechatronics, AIM. https://doi.org/10.1109/AIM.2007.4412527

11.

Christ M (2013) Cfk drapiereffektor zur automatisierten fertigung anspruchsvoller. Dissertation. Books On Demand

12.

Allwood JM, Duncan SR, Cao J et al (2016) Closed-loop control of product properties in metal forming. CIRP Ann Manuf Technol 65(2):573–596. https://doi.org/10.1016/j.cirp.2016.06.002 CrossRef

13.

Hesse D, Hoppe F, Groche P (2017) Controlling product stiffness by an incremental sheet metal forming process. Procedia Manuf 10:276–285. https://doi.org/10.1016/j.promfg.2017.07.058 CrossRef

14.

Merklein M, Johannes M, Lechner M et al (2014) A review on tailored blanks—production, applications and evaluation. J Mater Process Technol 214(2):151–164. https://doi.org/10.1016/j.jmatprotec.2013.08.015 CrossRef

15.

Long A, Skordos A, Harrison P, Clifford M, Sutcliffe M (2006) Optimisation of sheet forming for textile composites using variable peripheral pressure. In: 27th International Conference SAMPE EUROPE

16.

Chen S, Harper LT, Endruweit A et al (2015) Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints. Compos Part A Appl Sci Manuf 76:10–19. https://doi.org/10.1016/j.compositesa.2015.05.006 CrossRef

17.

Kärger L, Galkin S, Zimmerling C et al (2018) Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components. Compos Struct 192:143–152. https://doi.org/10.1016/j.compstruct.2018.02.041 CrossRef

18.

Nosrat Nezami F, Gereke T, Cherif C (2017) Active forming manipulation of composite reinforcements for the suppression of forming defects. Compos Part A Appl Sci Manuf 99:94–101. https://doi.org/10.1016/j.compositesa.2017.04.011 CrossRef

19.

Hardt DE, Olsen BA, Allison BT, Pasch K (1981) Sheet metal forming with discrete die surfaces. In: Ninth North American manufacturing research conference proceedings, pp 140–144

20.

Haas E, Schwarz RC, Papazian JM (2002) Design and test of a reconfigurable forming die. J Manuf Process 4(1):77–85. https://doi.org/10.1016/S1526-6125(02)70134-5 CrossRef

21.

Simon D, Kern L, Wagner J et al (2014) A reconfigurable tooling system for producing plastic shields. Procedia CIRP 17:853–858. https://doi.org/10.1016/j.procir.2014.01.095 CrossRef

22.

Hardt DE, Webb RD, Suh NP (1982) Sheet metal die forming using closed-loop shape control. CIRP Ann 31(1):165–169. https://doi.org/10.1016/S0007-8506(07)63290-9 CrossRef

23.

Boers SS (2006) Optimum forming strategies with a 3D reconfigurable die. Technische Universiteit Eindhoven, Eindhoven

24.

Luo Y, Yang W, Liu Z et al (2016) Numerical simulation and experimental study on cyclic multi-point incremental forming process. Int J Adv Manuf Technol 85(5–8):1249–1259. https://doi.org/10.1007/s00170-015-8030-1 CrossRef

25.

Peng H, Liu H, Zhang X (2017) Numerical investigation of wrinkle for multi-point thermoforming of Polymethylmethacrylate sheet. IOP Confer Ser Mater Sci Eng. https://doi.org/10.1088/1757-899X/242/1/012028 CrossRef

26.

Walczyk DF, Hosford JF, Papazian JM (2003) Using reconfigurable tooling and surface heating for incremental forming of composite aircraft parts. J Manuf Sci Eng 125(2):333. https://doi.org/10.1115/1.1561456 CrossRef

27.

Fleischer J, Albers A, Coutandin S et al (2016) Materialeffizienz im Resin-Transfer-Moulding-Prozess. VDI-Z 158:82–84

28.

Hancock SG, Potter KD (2006) The use of kinematic drape modelling to inform the hand lay-up of complex composite components using woven reinforcements. Composites Part A Appl Sci Manuf 37(3):413–422. https://doi.org/10.1016/j.compositesa.2005.05.044 CrossRef

29.

Liebau DF (2013) Experimentelle und simulative Absicherung eines automatisierten Umformprozesses von Faserverbundpreforms, 1. Aufl. Verl. Dr. Hut, München

30.

Boisse P, Hamila N, Madeo A (2016) Modelling the development of defects during composite reinforcements and prepreg forming. Philos Trans A Math Phys Eng Sci 374(2071):20150269. https://doi.org/10.1098/rsta.2015.0269 CrossRef

31.

Long AC (2007) Composites forming technologies. Woodhead, Cambridge

32.

Nishi M, Hirashima T (2013) Approach for dry textile composite forming simulation. In: Proceedings of 19th international conference on composite materials (ICCM-19), Canada, pp 7486–7493

33.

Dassault Systemes Simulia Corp (2016) Simulia Abaqus Documentation 2017

34.

Dörr D, Joppich T, Schirmaier F, Mosthaf T, Kärger L, Henning F (2016) A method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature. In: AIP conference proceedings. https://doi.org/10.1063/1.4963567

35.

Nasdala L (2015) FEM-Formelsammlung Statik und Dynamik: Hintergrundinformationen, Tipps und Tricks, 3. aktualisierte Aufl. Springer Vieweg, Wiesbaden

36.

Mattner T, Körbel W, Wrensch M et al (2018) Compensation of edge effects in picture frame testing of continuous fiber reinforced thermoplastics. Compos Part B Eng 142:95–101. https://doi.org/10.1016/j.compositesb.2018.01.009 CrossRef

37.

Prodromou AG, Chen J (1997) On the relationship between shear angle and wrinkling of textile composite preforms. Compos Part A Appl Sci Manuf 28(5):491–503. https://doi.org/10.1016/S1359-835X(96)00150-9 CrossRef

Titel: Influence of punch sequence and prediction of wrinkling in textile forming with a multi-punch tool
verfasst von: Sven Coutandin
David Brandt
Paul Heinemann
Paul Ruhland
Jürgen Fleischer
Publikationsdatum: 10.08.2018
Verlag: Springer Berlin Heidelberg
Erschienen in: Production Engineering / Ausgabe 6/2018
Print ISSN: 0944-6524
Elektronische ISSN: 1863-7353
DOI: https://doi.org/10.1007/s11740-018-0845-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2018

Surface pre-treatment and its influence on electric functionality and the formability of screen printed steel sheet

Improvement of deep drawing conditions utilizing LDPE/Gr/MWCNT composite films

Frictionally damped tool holder for long projection cutting tools

Formability consideration during bead optimisation to stiffen deep drawn parts

Local order scheduling for mixed-model assembly lines in the aircraft manufacturing industry

Industrial consideration of thermal issues in machine tools

Premium Partner

Marktübersichten