nach oben

Glass and Ceramics

Erschienen in:

04.04.2018 | SCIENCE FOR CERAMIC PRODUCTION

Influence of the Composition and Properties of Molding Bodies on the Characteristics of Corundum Block Carriers

verfasst von: V. Yu. Kruglyakov, E. F. Sutormina, N. A. Kulikovskaya, N. A. Rudina, L. A. Isupova

Erschienen in: Glass and Ceramics | Ausgabe 11-12/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Extrusion molding, varying the particle size and the conditions for obtaining corundum, was used to obtain ceramic block carriers. The structural and mechanical properties of the molding bodies were investigated, and the textural and strength characteristics of the blocks after calcination were determined. It was shown that the use of corundum powder obtained by mixing particles of different size results in the production of molding bodies of the first or fourth structural-mechanical type and makes it possible to produce ceramic block carrier with channel density about 200 pieces/inch², mechanical strength at least 4.3 MPa, and high resistance to thermal cycling.

Vorheriger Artikel Comminution of Ceramic Production Wastes in a Vertical Centrifugal Mill

Nächster Artikel Study of the Effect of Promoters on Thermochemical Transformations of Zirconium Hydroxide

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

L. A. Isupova, E. F. Sutormina, N. A. Kulikovskaya, et al., “Honeycomb supported perovskite catalysts for ammonia oxidation processes,” Catalysis Today, 105, 429 – 435 (2005).CrossRef

Jürgen Neuman, The Catalyst and a Method of Decomposition of Dinitrogen Monoxide and a Method and Apparatus for Producing Nitric Acid, RF Patent 2397810. IPC-8, B01J23_10 [in Russian], published August 27, 2010.

Yu. V. Alekcandrova, E. A. Vlasov, N. V. Mal’tseva, et al., “Block articles with honeycomb structure made from of ceramic oxide, Pt. 1,” Ogneup. Tekh. Keram., No. 7 – 8, 62 – 66 (2010).

Z. R. Ismagilov, M. N. Shepeleva, R. A. Skrabina, and V. B. Fenelonov, “Interrelation between structural and mechanical characteristics of spherical alumina granules and the initial hydroxide properties,” Appl. Catal., 69, 65 – 73 (1991).CrossRef

A. V. Zhensa, A. A. Polunin, E. M. Kol’tsova, et al., “Development of an information system for extrusion molding of catalytic pastes,” Khim. Prom. Segodnya, No. 9, 4 – 9 (2003).

I. A. Petropavlovskii, V. V. Kostyuchenko, V. A. Filipin, et al., “Characteristics of extrusion technology and application of aluminum-oxide catalysts with shaped grains,” Khim. Prom., No. 10, 19 – 23 (1997).

V. Yu. Kruglyakov, L. A. Isupova, A. V. Glazyrin, et al., “Investigation of the properties of molding bodies based on aluminum hydroxides for extrusion molding,” Kataliz v Prom-sti, No. 1, 6 – 12 (2016).CrossRef

S. P. Nichiporenko, Physicochemical and Chemical Mechanics of Disperse Structures in Construction Ceramics Technology [in Russian], Naukova Dumka, Kiev (1968).

V. Yu. Kruglyakov, N. A. Kulikovskaya, and L. A. Isupova, “Rheological properties catalytic pastes of the block catalyst IK-42-1 as a function of the preparation conditions,” Kataliz v Prom-sti, No. 5, 41 – 49 (2008).

10.

V. Yu. Prokof’ev, P. B. Razgovorov, and A. P. Il’in, Fundamentals of the Physicochemical Mechanics Extruded Catalysts and Sorbents [in Russian], Krasand, Moscow (2013).

11.

A. P. Il’in and V. Yu. Prokof’ev Physicochemical Mechanics in the Technology of Catalysts And Sorbents [in Russian], Ivanovo State Chemical Technological Institute, Ivanovo (2004).

12.

Z. R. Ismagilov, R. A. Shkrabina, and N. A. Koryabkina, Aluminum Oxide Carriers: Production, Properties, and Applications in Catalytic Processes in Environmental Protection [in Russian], SO RAN GPNTB; Inst. Kataliza im. G. K. Boreskova, Novosibirsk (1998) (Ekologiya, No. 50).

13.

J. J. Benbow and J. Bridgwater, “On the prediction of extrudate pore structure from particle size,” Chem. Eng. Sci., 42(4), 753 – 766 (1987).CrossRef

14.

P. A. Rebinder, Physicochemical Mechanics of Disperse Structures [in Russian], Nauka, Moscow (1966).

Titel: Influence of the Composition and Properties of Molding Bodies on the Characteristics of Corundum Block Carriers
verfasst von: V. Yu. Kruglyakov
E. F. Sutormina
N. A. Kulikovskaya
N. A. Rudina
L. A. Isupova
Publikationsdatum: 04.04.2018
Verlag: Springer US
Erschienen in: Glass and Ceramics / Ausgabe 11-12/2018
Print ISSN: 0361-7610
Elektronische ISSN: 1573-8515
DOI: https://doi.org/10.1007/s10717-018-0002-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11-12/2018

Piezoelectric Transformer Aided X-Ray Generation in Vacuum

Particulars of Calcium Aluminate Formation During Mechanochemical Interaction in the System Ca(OH)2–Al–H2O

Sag Bending Control in the Production of Automobile Windshields

Clay Modifier Activation for Ceramic Brick by Ultrasonic Extrusion

Phases Obtained by Mechanoactivation in Ceramic Based on Calcium Phosphate Nanopowders with Ca/P = 1.25

Controlling the Optical Characteristics of Laser-Induced Microstructures in Zinc Phosphate Glass Containing Silver

Premium Partner

Marktübersichten