Skip to main content

2017 | OriginalPaper | Buchkapitel

Influence of the Determination of FLC’s and FLSC’s and Their Application for Deep Drawing Process with Additional Force Transmission

verfasst von : B.-A. Behrens, A. Bouguecha, C. Bonk, D. Rosenbusch, N. Grbic, M. Vucetic

Erschienen in: Proceedings of 5th International Conference on Advanced Manufacturing Engineering and Technologies

Verlag: Springer International Publishing

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This contribution deals with the experimental and numerical analysis of the material fracture behavior of steel sheet material HCT 600 X + Z (1.0941) in thickness s0 = 1.0 mm using the Nakajima test. Firstly, the Nakajima test is carried out, whereby the major and minor strains are measured with the optical measuring system ARAMIS. Here, two different estimation methods for determination of the strains are applied and sensitivity of estimated results related to different strain gauge lengths was analyzed. Hereby, the forming limit curve (FLC) is determined experimentally. Subsequently, the FEA of a Nakajima test was carried out and compared with corresponding experimental results. The flow behavior of HCT 600 is modelled using a planar anisotropic material model based on the Hill’s 1948 criterion, which was validated in previous work. Using FLC the simulation-based determination of the forming limit stress curve (FLSC) is carried out. Furthermore, two deep drawing processes, conventional and process with activation of additional force transmission are carried out producing the rectangle cups. Here, the larger process window is achieved. Within the numerical investigation of the material fracture behavior the FLC and FLSC are applied by FEA of both deep drawing processes. Finally, the assessment of the performed material modelling is presented.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Doege E, Behrens BA. Handbuch der Umformtechnik, Springer ISBN:978-3-642-04248-5 Doege E, Behrens BA. Handbuch der Umformtechnik, Springer ISBN:978-3-642-04248-5
2.
Zurück zum Zitat Behrens BA, Bouguecha A, Bonk C, Grbic N, Vucetic M (2017) Validation of the FEA of a deep drawing process with additional force transmission, 20th international ESAFORM conference on material forming, Dublin 2017 (accepted) Behrens BA, Bouguecha A, Bonk C, Grbic N, Vucetic M (2017) Validation of the FEA of a deep drawing process with additional force transmission, 20th international ESAFORM conference on material forming, Dublin 2017 (accepted)
3.
Zurück zum Zitat von Mises R (1913) Mechanik der festen Körper im plastisch deformablen Zustand, Göttin. Nachr. Math. Phys. 1:582–592 von Mises R (1913) Mechanik der festen Körper im plastisch deformablen Zustand, Göttin. Nachr. Math. Phys. 1:582–592
4.
Zurück zum Zitat Hill R. A theory of the yielding and plastic flow of anisotropic metals. In: Proceedings of the royal society of London, Series A, vol 193, pp 281–197 Hill R. A theory of the yielding and plastic flow of anisotropic metals. In: Proceedings of the royal society of London, Series A, vol 193, pp 281–197
5.
Zurück zum Zitat Hallfeldt T, Hotz W, Leppin C, Keller S, Friebe H, Till ET, Müller R, Vučetić M, Vegter H (2014) Sheet bulge testing, In: Comprehensive Materials Processing, vol 1, pp 85–93, Elsevier Ltd., ISBN:978-008096533-8 Hallfeldt T, Hotz W, Leppin C, Keller S, Friebe H, Till ET, Müller R, Vučetić M, Vegter H (2014) Sheet bulge testing, In: Comprehensive Materials Processing, vol 1, pp 85–93, Elsevier Ltd., ISBN:978-008096533-8
6.
Zurück zum Zitat Behrens BA, Bonk C, Grbic N, Vucetic M (2016) Numerical analysis of a deep drawing process with additional force transmission for an extension of the process limits. In: 4th international conference recent trends in structural materials COMAT2016, Pilsen 2016 (accepted) Behrens BA, Bonk C, Grbic N, Vucetic M (2016) Numerical analysis of a deep drawing process with additional force transmission for an extension of the process limits. In: 4th international conference recent trends in structural materials COMAT2016, Pilsen 2016 (accepted)
7.
Zurück zum Zitat Behrens BA, Bouguecha A, Vucetic M, Peshekhodov I (2012) Characterisation of the quasi-static flow and fracture behaviour of dual-phase steel sheets in a wide range of plane stress states. Arch Civ Mech Eng 12(4):397–406 Behrens BA, Bouguecha A, Vucetic M, Peshekhodov I (2012) Characterisation of the quasi-static flow and fracture behaviour of dual-phase steel sheets in a wide range of plane stress states. Arch Civ Mech Eng 12(4):397–406
8.
Zurück zum Zitat DIN EN ISO 12004-2: Metallische Werkstoffe – Bleche und Bänder – Bestimmung der Grenzformänderungskurve – Teil 2: Bestimmung von Grenzformänderungskurven im Labor (ISO 12004-2: 2008), Beuth Verlag, 2009 DIN EN ISO 12004-2: Metallische Werkstoffe – Bleche und Bänder – Bestimmung der Grenzformänderungskurve – Teil 2: Bestimmung von Grenzformänderungskurven im Labor (ISO 12004-2: 2008), Beuth Verlag, 2009
9.
Zurück zum Zitat Col A (2002) FLC’s: past, present and future, IDDRG conference 2002, Nagoya, Japan. pp S107–S125 Col A (2002) FLC’s: past, present and future, IDDRG conference 2002, Nagoya, Japan. pp S107–S125
11.
Zurück zum Zitat Stoughton TB, Zhu X (1999) A general forming limit criterion for sheet metal forming. Int J Mech Sci, Elsevier, (pii:S0020-7403(98)00113-1) Stoughton TB, Zhu X (1999) A general forming limit criterion for sheet metal forming. Int J Mech Sci, Elsevier, (pii:S0020-7403(98)00113-1)
12.
Zurück zum Zitat Dic RE, Yoon JW, Stoughton TB (2015) Path-independent forming limit models for multi-stage forming processes. In: Thematic issue, Springer, Berlin, doi:10.1007/s12289-015-1220-4 Dic RE, Yoon JW, Stoughton TB (2015) Path-independent forming limit models for multi-stage forming processes. In: Thematic issue, Springer, Berlin, doi:10.​1007/​s12289-015-1220-4
Metadaten
Titel
Influence of the Determination of FLC’s and FLSC’s and Their Application for Deep Drawing Process with Additional Force Transmission
verfasst von
B.-A. Behrens
A. Bouguecha
C. Bonk
D. Rosenbusch
N. Grbic
M. Vucetic
Copyright-Jahr
2017
DOI
https://doi.org/10.1007/978-3-319-56430-2_30

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.