01.02.2011 | Originals Originalarbeiten | Ausgabe 1/2011
Influence of the slicing technique on mechanical properties of the produced veneer
- Zeitschrift:
- European Journal of Wood and Wood Products > Ausgabe 1/2011
Abstract
The aim of this investigation was to compare the mechanical behaviour of lengthwise and plain sliced veneer of the species beech (Fagus sylvatica L.). Therefore, tension tests parallel and perpendicular to the grain were carried out. The results were evaluated using the variance analysis (ANOVA). As a result it can be stated that lengthwise sliced veneers exhibit significantly higher strength and better mechanical characteristics than plain sliced veneers. The checks parallel to the grain which occurred by manufacturing at that side of the veneer leaf which faces the cutting edge and which is stressed in tension are to be considered as reason therefore. In contrast to the tests parallel to the grain the modulus of elasticity perpendicular to the grain shows significantly lower values for lengthwise sliced veneers than for plain sliced veneers. Due to their higher strength values lengthwise sliced veneers are considered better base materials for engineered wood products than plain sliced veneers.