Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 8/2020

12.08.2020

Influence of Thick Plate Bending Process on Material Strength Distribution in Hydrogenation Reactor Shells

verfasst von: You Li, Zhiping Chen, Peng Jiao, Delin Zhang, Dong Xu, He Ma, Song Huang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 8/2020

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Thick plate bending process (warm bending and tempering) has a profound impact on the material strength distribution (MSD) in hydrogenation reactor shells. To date, few studies have studied the thick plate bending process. In this work, an artificial neural network (ANN) combined with finite element analysis (FEA) was utilized to investigate the impact of thick plate bending on the MSD of reactor shells. First, tensile tests of 0-10% pre-strained 2.25Cr-1Mo-0.25 V specimens were subjected to 390 to 510 °C. The results obtained from this experiment were used to develop ANN with two inputs (temperature and plastic strain) to predict the strength of pre-deformed steel. Subsequently, the plastic strain distribution of reactor shells after warm bending was obtained via FEA. We then inputted the FEA results into well-established ANN to predict the MSD of un-tempered reactor shells. The MSD of an actual tempered reactor shell was measured to study the synergic effect of warm bending and tempering on MSD variation. Results showed that the average absolute relative errors between the proposed ANN and tensile test results were below 4%. The absolute relative errors of the proposed prediction method varied from 0.24 to 7.88%. The proposed method is therefore reliable in the lightweight design of the hydrogenation reactor.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat D. Wang, Y. Li, L. Jin, K. Hao, B. Wei, D. Yao, and H. Haoquan, Integrated process for partial oxidation of heavy oil and in situ reduction of red mud, Appl. Catal. B, 2019, 258(10), p 968–973 (in English) D. Wang, Y. Li, L. Jin, K. Hao, B. Wei, D. Yao, and H. Haoquan, Integrated process for partial oxidation of heavy oil and in situ reduction of red mud, Appl. Catal. B, 2019, 258(10), p 968–973 (in English)
2.
Zurück zum Zitat G.H.C. Prado, Y. Rao, and A. de Klerk, Nitrogen removal from oil: a review, Energy Fuels, 2017, 31(1), p 14–36 (in English) G.H.C. Prado, Y. Rao, and A. de Klerk, Nitrogen removal from oil: a review, Energy Fuels, 2017, 31(1), p 14–36 (in English)
3.
Zurück zum Zitat Y. Zhang, L. Huang, X. Xi, W. Li, G. Sun, S. Gao, and S. Zhang, Deep conversion of venezuela heavy oil via integrated cracking and coke gasification − combustion process, Energy Fuels, 2017, 31(9), p 9915–9922 (in English) Y. Zhang, L. Huang, X. Xi, W. Li, G. Sun, S. Gao, and S. Zhang, Deep conversion of venezuela heavy oil via integrated cracking and coke gasification − combustion process, Energy Fuels, 2017, 31(9), p 9915–9922 (in English)
4.
Zurück zum Zitat Y. Zhang, Y. Deping, W. Li, Y. Wang, S. Gao, and X. Guangwen, Fundamentals of petroleum residue cracking gasification for coproduction of oil and syngas, Ind. Eng. Chem. Res., 2012, 51(46), p 15032–15040 (in English) Y. Zhang, Y. Deping, W. Li, Y. Wang, S. Gao, and X. Guangwen, Fundamentals of petroleum residue cracking gasification for coproduction of oil and syngas, Ind. Eng. Chem. Res., 2012, 51(46), p 15032–15040 (in English)
5.
Zurück zum Zitat S. Huang, Z. Chen, Y. Li, and D. Zhang, Impact of hot bending forming on the high temperature mechanical properties and hydrogen damage of 2.25Cr-1Mo-0.25 V steel, J. Mater. Eng. Perform., 2019, 28(1), p 567–577 (in English) S. Huang, Z. Chen, Y. Li, and D. Zhang, Impact of hot bending forming on the high temperature mechanical properties and hydrogen damage of 2.25Cr-1Mo-0.25 V steel, J. Mater. Eng. Perform., 2019, 28(1), p 567–577 (in English)
6.
Zurück zum Zitat H. Zhou, X. Chi, Q. Wang, H. Pan, and J. Chen, Characterization of hydrogen embrittlement by eddy current method, Res. Nondestr. Eval., 2018, 29(4), p 212–220 (in English) H. Zhou, X. Chi, Q. Wang, H. Pan, and J. Chen, Characterization of hydrogen embrittlement by eddy current method, Res. Nondestr. Eval., 2018, 29(4), p 212–220 (in English)
7.
Zurück zum Zitat Y. Liu and Q. Pang, Study on endurance property of 2.25Cr-1Mo-0.25 V steel hydrogenation cylinder forgings, Hot Work Technol., 2018, 47(1), p 158–160 (164, in Chinese) Y. Liu and Q. Pang, Study on endurance property of 2.25Cr-1Mo-0.25 V steel hydrogenation cylinder forgings, Hot Work Technol., 2018, 47(1), p 158–160 (164, in Chinese)
8.
Zurück zum Zitat Y. Wang, G. Cheng, M. Qin, Q. Li, Z. Zhang, K. Chen, Y. Li, H. Hu, W. Wu, and J. Zhang, Effect of high temperature deformation on the microstructure, mechanical properties and hydrogen embrittlement of 2.25Cr-1Mo-0.25 V steel, Int. J. Hydrog. Energy, 2017, 42(38), p 24549–24559 (in English) Y. Wang, G. Cheng, M. Qin, Q. Li, Z. Zhang, K. Chen, Y. Li, H. Hu, W. Wu, and J. Zhang, Effect of high temperature deformation on the microstructure, mechanical properties and hydrogen embrittlement of 2.25Cr-1Mo-0.25 V steel, Int. J. Hydrog. Energy, 2017, 42(38), p 24549–24559 (in English)
9.
Zurück zum Zitat Y. Song, M. Chai, B. Yang, Z. Han, S. Ai, Y. Liu, G. Cheng, and Y. Li, Investigation of the influence of pre-charged hydrogen on fracture toughness of as-received 2.25Cr1Mo0.25 V steel and weld, Materials, 2018, 11(7), p 1068 (in English) Y. Song, M. Chai, B. Yang, Z. Han, S. Ai, Y. Liu, G. Cheng, and Y. Li, Investigation of the influence of pre-charged hydrogen on fracture toughness of as-received 2.25Cr1Mo0.25 V steel and weld, Materials, 2018, 11(7), p 1068 (in English)
10.
Zurück zum Zitat Y. Song, M. Chai, B. Yang, Z. Han, S. Ai, Y. Liu, G. Cheng, and Y. Li, Effect of cementite on the hydrogen diffusion/trap characteristics of 2.25Cr-1Mo-0.25 V steel with and without annealing, Materials, 2018, 11(5), p 788 (in English) Y. Song, M. Chai, B. Yang, Z. Han, S. Ai, Y. Liu, G. Cheng, and Y. Li, Effect of cementite on the hydrogen diffusion/trap characteristics of 2.25Cr-1Mo-0.25 V steel with and without annealing, Materials, 2018, 11(5), p 788 (in English)
11.
Zurück zum Zitat Y. Song, M. Chai, W. Wu, Y. Liu, M. Qin, and G. Cheng, Experimental investigation of the effect of hydrogen on fracture toughness of 2.25Cr-1Mo-0.25 V steel and welds after annealing, Materials, 2018, 11(4), p 499 (in English) Y. Song, M. Chai, W. Wu, Y. Liu, M. Qin, and G. Cheng, Experimental investigation of the effect of hydrogen on fracture toughness of 2.25Cr-1Mo-0.25 V steel and welds after annealing, Materials, 2018, 11(4), p 499 (in English)
12.
Zurück zum Zitat Z. Jiang, P. Wang, D. Li, and Y. Li, The evolutions of microstructure and mechanical properties of 2.25Cr-1Mo-0.25 V steel with different initial microstructures during tempering, Mater. Sci. Eng. A-Struct. Mater. Properties Microstruct. Process., 2017, 699, p 165–175 (in English) Z. Jiang, P. Wang, D. Li, and Y. Li, The evolutions of microstructure and mechanical properties of 2.25Cr-1Mo-0.25 V steel with different initial microstructures during tempering, Mater. Sci. Eng. A-Struct. Mater. Properties Microstruct. Process., 2017, 699, p 165–175 (in English)
13.
Zurück zum Zitat Z. Jiang, P. Wang, D. Li, and Y. Li, Effects of tempering temperature on the microstructure and mechanical properties of granular bainite in 2.25Cr-1Mo-0.25 V steel, Acta Metall. Sin., 2015, 51(8), p 925–934 (in Chinese) Z. Jiang, P. Wang, D. Li, and Y. Li, Effects of tempering temperature on the microstructure and mechanical properties of granular bainite in 2.25Cr-1Mo-0.25 V steel, Acta Metall. Sin., 2015, 51(8), p 925–934 (in Chinese)
14.
Zurück zum Zitat R.D. Fu, S.F. Wu, W.H. Zhou, W.H. Zhang, Y.Q. Yang, and F.C. Zhang, Effects of heat treatment processes on microstructure and properties of 2·25Cr–1Mo–0·25 V HSLA steels, Metal Sci. J., 2013, 25(1), p 50–55 (in English) R.D. Fu, S.F. Wu, W.H. Zhou, W.H. Zhang, Y.Q. Yang, and F.C. Zhang, Effects of heat treatment processes on microstructure and properties of 2·25Cr–1Mo–0·25 V HSLA steels, Metal Sci. J., 2013, 25(1), p 50–55 (in English)
15.
Zurück zum Zitat Z. Hua, X. Zhang, J. Zheng, C. Gu, T. Cui, Y. Zhao, and W. Peng, Hydrogen-enhanced fatigue life analysis of Cr–Mo steel high-pressure vessels, Int. J. Hydrog. Energy, 2017, 42(16), p 12005–12014 (in English) Z. Hua, X. Zhang, J. Zheng, C. Gu, T. Cui, Y. Zhao, and W. Peng, Hydrogen-enhanced fatigue life analysis of Cr–Mo steel high-pressure vessels, Int. J. Hydrog. Energy, 2017, 42(16), p 12005–12014 (in English)
16.
Zurück zum Zitat C. Wu, B. Jia, and S. Han, Coupling a cellular automaton model with a finite element model for simulating deformation and recrystallization of a low-carbon micro-alloyed steel during hot compression, J. Mater. Eng. Perform., 2019, 28(2), p 938–955 (in English) C. Wu, B. Jia, and S. Han, Coupling a cellular automaton model with a finite element model for simulating deformation and recrystallization of a low-carbon micro-alloyed steel during hot compression, J. Mater. Eng. Perform., 2019, 28(2), p 938–955 (in English)
17.
Zurück zum Zitat C. Liu and J. Gao, Stress corrosion of hydrogenation reactor material, J. Northeast For. Univ., 2009, 37(4), p 65–57 (in Chinese) C. Liu and J. Gao, Stress corrosion of hydrogenation reactor material, J. Northeast For. Univ., 2009, 37(4), p 65–57 (in Chinese)
18.
Zurück zum Zitat O. Sabokpa, A. Zarei-Hanzaki, H.R. Abedi, and N. Haghdadi, Artificial neural network modeling to predict the high temperature flow behavior of an AZ81 magnesium alloy, Mater. Des., 2012, 39, p 390–396 (in English) O. Sabokpa, A. Zarei-Hanzaki, H.R. Abedi, and N. Haghdadi, Artificial neural network modeling to predict the high temperature flow behavior of an AZ81 magnesium alloy, Mater. Des., 2012, 39, p 390–396 (in English)
19.
Zurück zum Zitat H. Ahmed, M.A. Wells, D.M. Maijer, B.J. Howes, and M.R. van der Winden, Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model, Mater. Sci. Eng., A, 2005, 390, p 278–290 (in English) H. Ahmed, M.A. Wells, D.M. Maijer, B.J. Howes, and M.R. van der Winden, Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model, Mater. Sci. Eng., A, 2005, 390, p 278–290 (in English)
20.
Zurück zum Zitat S.B. Davenport, N.J. Silk, C.N. Sparks, and C.M. Sellars, Development of constitutive equations for modelling of hot rolling, Mater. Sci. Technol., 2000, 16, p 539–546 (in English) S.B. Davenport, N.J. Silk, C.N. Sparks, and C.M. Sellars, Development of constitutive equations for modelling of hot rolling, Mater. Sci. Technol., 2000, 16, p 539–546 (in English)
21.
Zurück zum Zitat J. Luo, M. Li, X. Li, and Y. Shi, Constitutive model for high temperature deformation of titanium alloys using internal state variables, Mech. Mater., 2010, 42, p 157–165 (in English) J. Luo, M. Li, X. Li, and Y. Shi, Constitutive model for high temperature deformation of titanium alloys using internal state variables, Mech. Mater., 2010, 42, p 157–165 (in English)
22.
Zurück zum Zitat Y. Xia, W. Jiang, Q. Cheng, L. Jiang, and L. Jin, Hot deformation behavior of Ti-6Al-4 V-0.1Ru alloy during isothermal compression, Trans. Nonferrous Metals Soc. China, 2020, 30(1), p 134–146 Y. Xia, W. Jiang, Q. Cheng, L. Jiang, and L. Jin, Hot deformation behavior of Ti-6Al-4 V-0.1Ru alloy during isothermal compression, Trans. Nonferrous Metals Soc. China, 2020, 30(1), p 134–146
23.
Zurück zum Zitat Y. Han, G. Qiao, J. Sun, and D. Zou, A comparative study on constitutive relationship of as-cast 904L austenitic stainless steel during hot deformation based on Arrhenius-type and artificial neural network models, Comput. Mater. Sci., 2013, 67, p 93–103 (in English) Y. Han, G. Qiao, J. Sun, and D. Zou, A comparative study on constitutive relationship of as-cast 904L austenitic stainless steel during hot deformation based on Arrhenius-type and artificial neural network models, Comput. Mater. Sci., 2013, 67, p 93–103 (in English)
24.
Zurück zum Zitat Z. Sun, H. Yang, and Z. Tang, Microstructural evolution model of TA15 titanium alloy based on BP neural network method and application in isothermal deformation, Comput. Mater. Sci., 2010, 50(2), p 308–318 (in English) Z. Sun, H. Yang, and Z. Tang, Microstructural evolution model of TA15 titanium alloy based on BP neural network method and application in isothermal deformation, Comput. Mater. Sci., 2010, 50(2), p 308–318 (in English)
25.
Zurück zum Zitat G. Quan, W. Lv, Y. Mao, Y. Zhang, and J. Zhou, Prediction of flow stress in a wide temperature range involving phase transformation for as-cast Ti–6Al–2Zr–1Mo–1 V alloy by artificial neural network, Mater. Des., 2013, 50, p 51–61 (in English) G. Quan, W. Lv, Y. Mao, Y. Zhang, and J. Zhou, Prediction of flow stress in a wide temperature range involving phase transformation for as-cast Ti–6Al–2Zr–1Mo–1 V alloy by artificial neural network, Mater. Des., 2013, 50, p 51–61 (in English)
26.
Zurück zum Zitat Y. Zhu, W. Zeng, Y. Sun, F. Feng, and Y. Zhou, Artificial neural network approach to predict the flow stress in the isothermal compression of as-cast TC21 titanium alloy, Comput. Mater. Sci., 2011, 50, p 1785–1790 (in English) Y. Zhu, W. Zeng, Y. Sun, F. Feng, and Y. Zhou, Artificial neural network approach to predict the flow stress in the isothermal compression of as-cast TC21 titanium alloy, Comput. Mater. Sci., 2011, 50, p 1785–1790 (in English)
27.
Zurück zum Zitat Z. Cai, H. Ji, W. Pei, X. Tang, L. Xin, L. Yonghao, and W. Li, An investigation into the dynamic recrystallization (DRX) behavior and processing map of 33Cr23Ni8Mn3N based on an artificial neural network (ANN), Materials, 2020, 13(6), p 1282 (in English) Z. Cai, H. Ji, W. Pei, X. Tang, L. Xin, L. Yonghao, and W. Li, An investigation into the dynamic recrystallization (DRX) behavior and processing map of 33Cr23Ni8Mn3N based on an artificial neural network (ANN), Materials, 2020, 13(6), p 1282 (in English)
28.
Zurück zum Zitat X. Wu, H. Zhang, H. Cui, Z. Ma, W. Song, W. Yang, L. Jia, and H. Zhang, Quantitative relationship analysis of mechanical properties with mg content and heat treatment parameters in Al–7Si alloys using artificial neural network, Materials, 2019, 12(5), p 718 (in English) X. Wu, H. Zhang, H. Cui, Z. Ma, W. Song, W. Yang, L. Jia, and H. Zhang, Quantitative relationship analysis of mechanical properties with mg content and heat treatment parameters in Al–7Si alloys using artificial neural network, Materials, 2019, 12(5), p 718 (in English)
29.
Zurück zum Zitat Y. Zhou, Y. Xia, L. Jiang, S. Long, and D. Yang, Modeling of the hot flow behaviors for Ti-6Al-4 V-0.1Ru alloy by GA-BPNN model and its application, High Temp. Mater. Process (London), 2018, 37(6), p 551–562 (in English) Y. Zhou, Y. Xia, L. Jiang, S. Long, and D. Yang, Modeling of the hot flow behaviors for Ti-6Al-4 V-0.1Ru alloy by GA-BPNN model and its application, High Temp. Mater. Process (London), 2018, 37(6), p 551–562 (in English)
30.
Zurück zum Zitat G. Quan, J. Pan, and X. Wang, Prediction of the hot compressive deformation behavior for superalloy nimonic 80A by BP-ANN model, Appl. Sci, 2016, 6(3), p 66 (in English) G. Quan, J. Pan, and X. Wang, Prediction of the hot compressive deformation behavior for superalloy nimonic 80A by BP-ANN model, Appl. Sci, 2016, 6(3), p 66 (in English)
31.
Zurück zum Zitat Metallic materials-tensile testing-part 2: method of test at elevated temperature, GB/T 228.2, Chinese Standard, 2015 Metallic materials-tensile testing-part 2: method of test at elevated temperature, GB/T 228.2, Chinese Standard, 2015
32.
Zurück zum Zitat P. Tao, C. Zhang, and Z. Yang, Evolution of second phase in 2.25Cr-1Mo-0.25 V steel weld metal during high temperature tempering, Acta Metall. Sin., 2009, 45(1), p 51–57 (in Chinese) P. Tao, C. Zhang, and Z. Yang, Evolution of second phase in 2.25Cr-1Mo-0.25 V steel weld metal during high temperature tempering, Acta Metall. Sin., 2009, 45(1), p 51–57 (in Chinese)
33.
Zurück zum Zitat H. White, Learning in artificial neural networks: a statistical perspective, Neural Comput., 2014, 1(4), p 425–464 (in English) H. White, Learning in artificial neural networks: a statistical perspective, Neural Comput., 2014, 1(4), p 425–464 (in English)
34.
Zurück zum Zitat S. Dreiseitla and L. Ohno-Machadob, Logistic regression and artificial neural network classification models: a methodology review, J. Biomed. Inform., 2002, 35(5–6), p 352–359 (in English) S. Dreiseitla and L. Ohno-Machadob, Logistic regression and artificial neural network classification models: a methodology review, J. Biomed. Inform., 2002, 35(5–6), p 352–359 (in English)
35.
Zurück zum Zitat Y. Gao, Fabrication of plate-welding type hydro-reactor made of 2.25Cr-1Mo-0.25 V steel, Press. Vessel Technol., 2006, 23(12), p 33–36 (in Chinese) Y. Gao, Fabrication of plate-welding type hydro-reactor made of 2.25Cr-1Mo-0.25 V steel, Press. Vessel Technol., 2006, 23(12), p 33–36 (in Chinese)
36.
Zurück zum Zitat Q. Yue, Analysis for the plate bending process of the four-roll plate bending machine, Lanzhou Jiaotong University, 2014, in Chinese Q. Yue, Analysis for the plate bending process of the four-roll plate bending machine, Lanzhou Jiaotong University, 2014, in Chinese
37.
Zurück zum Zitat A. Ktari, Z. Antar, N. Haddar, and K. Elleuch, Modeling and computation of the three-roller bending process of steel sheets, J. Mech. Sci. Technol., 2012, 26(1), p 123–128 (in English) A. Ktari, Z. Antar, N. Haddar, and K. Elleuch, Modeling and computation of the three-roller bending process of steel sheets, J. Mech. Sci. Technol., 2012, 26(1), p 123–128 (in English)
38.
Zurück zum Zitat X. Han and L. Hua, 3D FE modeling of cold rotary forging of a ring workpiece, J. Mater. Process. Technol., 2009, 209(1–2), p 5353–5362 (in English) X. Han and L. Hua, 3D FE modeling of cold rotary forging of a ring workpiece, J. Mater. Process. Technol., 2009, 209(1–2), p 5353–5362 (in English)
39.
Zurück zum Zitat G.Y. Zhao, Y.L. Liu, H. Yang, C.H. Lu, and R.J. Gu, Three-dimensional finite-elements modeling and simulation of rotary-draw bending process for thin-walled rectangular tube, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2009, 499(1–2), p 257–261 (in English) G.Y. Zhao, Y.L. Liu, H. Yang, C.H. Lu, and R.J. Gu, Three-dimensional finite-elements modeling and simulation of rotary-draw bending process for thin-walled rectangular tube, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2009, 499(1–2), p 257–261 (in English)
40.
Zurück zum Zitat S. Huang, Z. Chen, Y. Li, and D. Zhang, Effect of warm forming on microstructure and mechanical properties of 2.25Cr1Mo0.25 V steel cylindrical shell, Heat Treat. Met., 2019, 44(5), p 77–82 (in Chinese) S. Huang, Z. Chen, Y. Li, and D. Zhang, Effect of warm forming on microstructure and mechanical properties of 2.25Cr1Mo0.25 V steel cylindrical shell, Heat Treat. Met., 2019, 44(5), p 77–82 (in Chinese)
41.
Zurück zum Zitat Z. Liu, C. Liu, L. Miao, X. Guo, J. Ding, and H. Zhang, The evolution of complex carbide precipitates in a low alloy Cr-Mo-V steel after long-term aging treatment, Materials, 2019, 12(10), p 1724 (in English) Z. Liu, C. Liu, L. Miao, X. Guo, J. Ding, and H. Zhang, The evolution of complex carbide precipitates in a low alloy Cr-Mo-V steel after long-term aging treatment, Materials, 2019, 12(10), p 1724 (in English)
42.
Zurück zum Zitat R.D. Fu, Y.Q. Yang, C.Y. Wang, and W.H. Zhang, Effects of weld thermal cycles and post-welding tempering on second phase particles in 2·25Cr–1Mo–0·25 V steels, Sci. Technol. Weld. Joining, 2008, 13(4), p 349–356 (in English) R.D. Fu, Y.Q. Yang, C.Y. Wang, and W.H. Zhang, Effects of weld thermal cycles and post-welding tempering on second phase particles in 2·25Cr–1Mo–0·25 V steels, Sci. Technol. Weld. Joining, 2008, 13(4), p 349–356 (in English)
43.
Zurück zum Zitat L. Song, R. Sun, W. Gu, and X. Li, Effects of heat treatment process on microstructure and mechanical properties of 2.25Cr-1Mo-0.25 V steel weld seam, Heat Treat. Met., 2015, 40(12), p 110–113 (in Chinese) L. Song, R. Sun, W. Gu, and X. Li, Effects of heat treatment process on microstructure and mechanical properties of 2.25Cr-1Mo-0.25 V steel weld seam, Heat Treat. Met., 2015, 40(12), p 110–113 (in Chinese)
44.
Zurück zum Zitat D. Wu, F. Wang, C. Jin, and C. Li, Effects of Nb and tempering time on carbide precipitation behavior and mechanical properties of Cr-Mo-V steel for brake discs, Steel Res. Int., 2018, 89(5), p 1700491 (in English) D. Wu, F. Wang, C. Jin, and C. Li, Effects of Nb and tempering time on carbide precipitation behavior and mechanical properties of Cr-Mo-V steel for brake discs, Steel Res. Int., 2018, 89(5), p 1700491 (in English)
45.
Zurück zum Zitat X. Liu, S. Nie, and Y. ren, Effects of predeformation diffusion annealing on distribution of alloy agents and structures, J. Plast. Eng., 2007, 14(6), p 138–141 (in English) X. Liu, S. Nie, and Y. ren, Effects of predeformation diffusion annealing on distribution of alloy agents and structures, J. Plast. Eng., 2007, 14(6), p 138–141 (in English)
46.
Zurück zum Zitat J. Zhang, W. Zhang, F. Ruidong, and C. Wang, Hot deforming behaviors and microstructures of 2.25Cr-1Mo-0.25 V steels, J. Plast. Eng., 2010, 17(3), p 44–49 (in Chinese) J. Zhang, W. Zhang, F. Ruidong, and C. Wang, Hot deforming behaviors and microstructures of 2.25Cr-1Mo-0.25 V steels, J. Plast. Eng., 2010, 17(3), p 44–49 (in Chinese)
47.
Zurück zum Zitat D. Sylvain, T.M. Caroline, U. Stephane, R. Justine, M. Bernard, R. Francois, K. Ernst, G. Lorenzon, and A. Francoise, Carbide precipitation in 2.25Cr-1Mo bainitic steel: effect of heating and isothermal tempering conditions, Metall. Mater. Trans. A-Phys. Metallurgy Mater. Sci., 2017, 48A(5), p 2164–2178 (in English) D. Sylvain, T.M. Caroline, U. Stephane, R. Justine, M. Bernard, R. Francois, K. Ernst, G. Lorenzon, and A. Francoise, Carbide precipitation in 2.25Cr-1Mo bainitic steel: effect of heating and isothermal tempering conditions, Metall. Mater. Trans. A-Phys. Metallurgy Mater. Sci., 2017, 48A(5), p 2164–2178 (in English)
48.
Zurück zum Zitat M. Qin, G. Cheng, Z. Zhang, Q. Li, J. Zhang, Numerical simulation of temperature field and residual stress in multi-pass welds in 2.25Cr-1Mo-0.25 V steel plate and comparison with experimental measurements, in Proceedings of the Asme Pressure Vessels And Piping Conference, Waikoloa, HI, Jul 2017 M. Qin, G. Cheng, Z. Zhang, Q. Li, J. Zhang, Numerical simulation of temperature field and residual stress in multi-pass welds in 2.25Cr-1Mo-0.25 V steel plate and comparison with experimental measurements, in Proceedings of the Asme Pressure Vessels And Piping Conference, Waikoloa, HI, Jul 2017
49.
Zurück zum Zitat P. Tao, C. Zhang, Z. Yang, and H. Takeda, Evolution and coarsening of carbides in 2.25Cr-1Mo steel weld metal during high temperature tempering, J. Iron Steel Res., 2010, 17(5), p 74–78 (in English) P. Tao, C. Zhang, Z. Yang, and H. Takeda, Evolution and coarsening of carbides in 2.25Cr-1Mo steel weld metal during high temperature tempering, J. Iron Steel Res., 2010, 17(5), p 74–78 (in English)
Metadaten
Titel
Influence of Thick Plate Bending Process on Material Strength Distribution in Hydrogenation Reactor Shells
verfasst von
You Li
Zhiping Chen
Peng Jiao
Delin Zhang
Dong Xu
He Ma
Song Huang
Publikationsdatum
12.08.2020
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 8/2020
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-020-05020-4

Weitere Artikel der Ausgabe 8/2020

Journal of Materials Engineering and Performance 8/2020 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.