2012 | OriginalPaper | Buchkapitel
Influence of Wave-Like Riblets on Turbulent Friction Drag
verfasst von : René Grüneberger, Felix Kramer, Erik Wassen, Wolfram Hage, Robert Meyer, Frank Thiele
Erschienen in: Nature-Inspired Fluid Mechanics
Verlag: Springer Berlin Heidelberg
Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
This article reports on a numerical and experimental study of the turbulent drag on riblet surfaces, where the trapezoidal riblet grooves were formed in a wave-like sinusoidal or zigzag pattern. The aim was to enhance the drag-reducing capabilities of conventional, straight riblet grooves by an additional contribution that originates from the induced oscillating lateral flow component. By means of a comprehensive parameter study in an oil channel at Re between 10,000 and 30,000 and DNS simulations at Re
τ
=180, suitable waveform parameters are sought, with which wave-like riblets produce a drag reduction larger than that of their straight counterparts. For a riblet cross-section shape that is known to be optimal for straight grooves, no such beneficial drag modification could be demonstrated. With a riblet groove cross-section different from the optimum shape, an augmented attainable drag reduction in comparison to straight riblet grooves was found within a certain range of the waveform amplitude. The improvement amounts up to 1.3%-points in terms of drag reduction. Wave-like riblets with reduced riblet height never outperformed the drag reduction of straight riblet grooves of optimal cross-section form, but exhibit a similar drag reduction in the best cases investigated. It is shown that this favourable influence on the riblet-modified turbulent drag persists under a mild misalignment of the riblets to the main flow direction.