Infrared Brazing of Ti₅₀Ni₅₀ Shape Memory Alloy and Inconel 600 Alloy with Two Ag-Cu-Ti Active Braze Alloys

Infrared brazing of Ti₅₀Ni₅₀ SMA and Inconel 600 alloy using Cusil-ABA and Ticusil filler metals has been investigated. The joints were dominated by Ag-Cu eutectic with proeutectic Cu in the Cusil-ABA brazed joint and with proeutectic Ag in the Ticusil one. A continuous curved belt composed of a Ni₃Ti layer and a (Cu _x Ni_1−x )₂Ti layer formed in the brazed Ti₅₀Ni₅₀/Ticusil/Inconel 600 joint. On the Ti₅₀Ni₅₀ SMA side, an intermetallic layer of (Cu _x Ni_1−x )₂Ti formed in all joints, with x values around 0.81 and 0.47. Layers of (Cu _x Ni_1−x )₂Ti, Ni₃Ti, and mixed Ni₃Ti and Ni₂Cr intermetallics were observed next to the Inconel 600 substrate in the brazed Ti₅₀Ni₅₀/Cusil-ABA/Inconel 600 joint. The maximum shear strengths of the joints using the Cusil-ABA filler metal and the Ticusil filler metal were 324 and 300 MPa, respectively. In the Cusil-ABA brazed joint, cracks with cleavage-dominated fracture propagated along the (Cu _x Ni_1−x )₂Ti interfacial layer next to the Ti₅₀Ni₅₀ SMA substrate. In the Ticusil brazed joint, ductile dimple fracture occurred in the Ag-rich matrix near the Inconel 600 alloy substrate. The absence of a detrimental Ti-Fe-(Cu) layer on the Inconel 600 substrate side can effectively improve the shear strength of the joint.