Skip to main content

2018 | OriginalPaper | Buchkapitel

Innovative Method of Measuring Electrode Wear During EDM Drilling Process Using Vision System

verfasst von : Zamzuri Hamedon, I. Razemi, A. R. Abdul Manaf, Nafrizuan Mat Yahya

Erschienen in: Intelligent Manufacturing & Mechatronics

Verlag: Springer Singapore

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The aim of this project is to develop a fully automated electrode wear detection system in EDM by using machine vision system and apply this system in detecting electrode wear in EDM drilling. Machine vision system was image-based technology used to perform automatic inspection and analysis of the electrode wear for EDM drilling. The high resolution’s DSLR camera as monitoring device to capture the image. The brass electrode with the diameter of 3 mm undergo hole making process with a depth of 10, 20, 30, 40, and 50 mm to obtain the level of wear. The images of the electrodes were remotely captured using DSLR camera then read from the laptop and undergo image processing process using Matlab software to calculate and determine the electrode wear. The result showed the wear percentage of the electrode is 4.235% for 10–30 mm in depth and 3.59% for depth of 30–50 mm. This project showed that the developed system was suitable and applicable in monitor an EDM electrode super drill machine.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Davim, J.P.: Modern Mechanical Engineering: Research, Development and Education: Springer Science & Business Media (2014) Davim, J.P.: Modern Mechanical Engineering: Research, Development and Education: Springer Science & Business Media (2014)
2.
Zurück zum Zitat Guo, R., Zhao, W.-S., Li, L., LI, Z.-Y., Zheng, G.J.-M.: Micro electrical discharge machining CNC system based on Linux. Comput. Integrat. Manufact. Syst. Beijing 13(2), 370 (2007) Guo, R., Zhao, W.-S., Li, L., LI, Z.-Y., Zheng, G.J.-M.: Micro electrical discharge machining CNC system based on Linux. Comput. Integrat. Manufact. Syst. Beijing 13(2), 370 (2007)
3.
Zurück zum Zitat Hamedon, Z., Mori, K., Abe, Y.: In-situ measurement of three-dimensional deformation behaviour of sheet and tools during stamping using borescope. J. Mater. Process. Technol. 214(4), 945–950 (2014)CrossRef Hamedon, Z., Mori, K., Abe, Y.: In-situ measurement of three-dimensional deformation behaviour of sheet and tools during stamping using borescope. J. Mater. Process. Technol. 214(4), 945–950 (2014)CrossRef
4.
Zurück zum Zitat Kalpakjian, S., Schmid, S.: Manufacturing, Engineering and Technology SI 6th ed. (2006) Kalpakjian, S., Schmid, S.: Manufacturing, Engineering and Technology SI 6th ed. (2006)
5.
Zurück zum Zitat Kaneko, T., Tsuchiya, M., Kazama, A.: Improvement of 3D NC contouring EDM using cylindrical electrodes—optical measurement of electrode deformation and machining of free-curves. In: Paper Presented at the Proceedings of 10th International Symposium for Electro Machining (ISEM-10) (1992) Kaneko, T., Tsuchiya, M., Kazama, A.: Improvement of 3D NC contouring EDM using cylindrical electrodes—optical measurement of electrode deformation and machining of free-curves. In: Paper Presented at the Proceedings of 10th International Symposium for Electro Machining (ISEM-10) (1992)
6.
Zurück zum Zitat Kurada, S., Bradley, C.: A review of machine vision sensors for tool condition monitoring. Comput. Ind. 34(1), 55–72 (1997)CrossRef Kurada, S., Bradley, C.: A review of machine vision sensors for tool condition monitoring. Comput. Ind. 34(1), 55–72 (1997)CrossRef
7.
Zurück zum Zitat Novini, A.R.: Fundamentals of on-line gauging for machine vision. Paper Presented at the Industrial Vision Metrology (1991) Novini, A.R.: Fundamentals of on-line gauging for machine vision. Paper Presented at the Industrial Vision Metrology (1991)
8.
Zurück zum Zitat Oguamanam, D., Raafat, H., Taboun, S.: A machine vision system for wear monitoring and breakage detection of single-point cutting tools. Comput. Ind. Eng. 26(3), 575–598 (1994)CrossRef Oguamanam, D., Raafat, H., Taboun, S.: A machine vision system for wear monitoring and breakage detection of single-point cutting tools. Comput. Ind. Eng. 26(3), 575–598 (1994)CrossRef
9.
Zurück zum Zitat Yan, M.-T., Huang, K.-Y., Lo, C.-Y.: A study on electrode wear sensing and compensation in micro-EDM using machine vision system. Int. J. Advanc. Manufact. Technol. 42(11–12), 1065–1073 (2009)CrossRef Yan, M.-T., Huang, K.-Y., Lo, C.-Y.: A study on electrode wear sensing and compensation in micro-EDM using machine vision system. Int. J. Advanc. Manufact. Technol. 42(11–12), 1065–1073 (2009)CrossRef
Metadaten
Titel
Innovative Method of Measuring Electrode Wear During EDM Drilling Process Using Vision System
verfasst von
Zamzuri Hamedon
I. Razemi
A. R. Abdul Manaf
Nafrizuan Mat Yahya
Copyright-Jahr
2018
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-10-8788-2_5

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.